- (1) Black Trim Piece
- (1) Instruction Sheet
- (1) Alcohol Prep Pad
- Hardware included:
- None Required
$24.99FREE Shipping on orders over $49
Hey everyone I’m Justin with AmericanMuscle.com and I’m taking a look at a couple of different ways to add a subtle touch of customization to the rear end of your ride thanks to this black third brake light trim ring and this quarter brake light trim ring for all 2010 and up Mustangs. These trim rings are sold separately but when paired together they give you that classic retro look that’s always popular, yet they’re a little bit more subtle than their chrome counterparts. Install couldn’t be any easier here folks, simply clean and prep the area first using the supplied alcohol wipes, then remove the backing on the 3M tape, and apply. Getting everything lined up and installed should tape about 5 minutes tops. I noticed some of you on the site have paired this third brake light trim ring with our custom Mustang third brake light decal or you can do it like we did, paired it up with a third brake light tint. Either way increases the cool factor. So if you want to give your Mustang a cool retro look with a modern twist, you’ll definitely want to check out this third brake light and quarter light trim bezel.
Fitment: 2010 2011 2012 2013 2014 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
(approx) 5 Minutes
Simple installation for anyone.
Does not fit GT500 Mustangs or Mustangs with a GT500 or Ducktail Spoiler installed
Does this stick to the body or the brake light cover? I have a custom tint on the cover and am concerned it will pull off the tint if it’s adhered directly to the tint and not the body. Thx
This will install on the body of the car yes.
Will this fit on 2013 with mmd ducktail spoiler
The SpeedForm Third Brake Light Trim will fit with the MMD Ducktail spoiler with no fitment issues.
How can this be removed? I just installed a GT500 spoiler and noticed tthe trim is not centered.
The Third Brake Light Trim is simply stuck on with 3M tape. You should be able to gently pull the trim off. If you are having trouble, try using fishing line to get in between the trim and the body of the car. This will cut the 3M tape without causing and scratches.
GT500 Spoiler Will the GT500 spoiler fit with the third brake light trim installed on a 2010 gt? Just got a gt500 spoiler for Xmas from you guys and I'm worried it won't fit :(
The Third Brake Light Trim - Black (10-14 GT, V6) will work with the GT500 spoiler just fine! If you look below in our customer photos you will see a few people have this part installed with the GT500 spoiler.
Will this fit on a 2011 Mustang GT with a 3DCarbon GT500 Style Spoiler on it?
No, the GT500 spoiler sits in the way of this tail light trim
November 03, 2019
Easy to apply and really sets off the brake light especially with the mustang black outHelpful (0)
November 01, 2019
Perfect and easy fit, gives it a more detailed and aggressive look!Helpful (0)
September 21, 2019
Third brake light trim
Awesome. Kind of a non gloss black that works well with matte black stripes or a matte black theme on exterior.Helpful (0)
August 18, 2019
Completes The rear end
Obviously very easy to install. Took a matter of seconds to complete the boring third brake to something very clean looking.Helpful (0)
August 15, 2019
I wanted something to clean the area up around my 3rd brake light where the racing stripes are trimmed. This does the job perfectly and looks great. However, had to shave it down at the top because it would not fit with my spoiler. Still looks great!Helpful (0)
August 04, 2019
SpeedForm Third Brake Light Trim
Would buy again. Just peel and stick. Nice look to finish out the light.Helpful (0)
July 17, 2019
Kind of cheap for the money.
To flexible, had someone to help to make sure it was put on right.Helpful (0)
June 30, 2019
Very nice look!
Super easy to install literally peel and place. Took 10 minutes to do itHelpful (0)
June 07, 2019
Came in well packaged. Think it's a little over priced for being something small and simple but it does make it stand out better.Helpful (0)
June 04, 2019
I was worried this wouldn’t fit under my Roush spoiler, being that clearance was tight. It turns out it fit after all! I think for such a small piece , it makes quite a difference. It gives the brake light a refined look! A little pricy for a small piece, but worth it !Helpful (1)
May 17, 2019
Quick and easy install. Comes with everything you need. Adds a nice touch of style.Helpful (0)
April 15, 2019
Great mod make your lights stand out.
This product make your third brake light stand out in detail. I love this product. Great mod add on plus it’s cheap.Helpful (0)
April 03, 2019
Brake light trim
I really like this trim, it’s small and adds a level of detail that people can notice, it’s durable from what I’ve seen so far, it’s withstood cold weather and a few washes and hasn’t come off, it does lone up exactly with the brake light so it will be noticeable if you don’t line it up but it’s pretty simple to do, the 3m adhesive tape on the trim itself works well I didn’t have to add any extra. Definitely a good buy if you’re looking to add subtle detail to your car. Looks great on grabber blueHelpful (0)
December 14, 2018
This is a nice accent for my brake light. I purchased the Roush light cover, and this trim really looks nice while covering up escaping light around the outside.Helpful (4)
December 12, 2018
It’s an ok product.. nothing fancy. Wanted help tie in the blacked out look on my gt.Helpful (4)
September 21, 2018
Needed to trim-out my lights, so I purchased the black third light trim for that extra pop! Looks good.Helpful (4)
September 08, 2018
Could be better.
Its only OK in my opinion. Would be better if it actually fit into the 3rd brake, and not just a piece of plastic 3m taped around the light.Helpful (4)
June 08, 2018
brake light trim
the fitment is kind off, but other than that I am satisfiedHelpful (4)
May 31, 2018
Awesome trim accessory
Helps the boring third brake light pop and get noticed!Helpful (5)
April 19, 2018
Doesn't fit under my spoiler...
My issue with this 3rd light trim isn't due to the product itself or its quality, its because it does not fit under my spoiler properly and there is no explanation / description of this in the specs. I have a 2012 V6 Performance Package with the GT500 spoiler and this trim just does not fit at all.Helpful (5)