Free Shipping On Orders Over $49. Details

Talk to a Mustang Enthusiast
1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$4,500 Giveaway! 3 Winners Enter Now

MGP Red Caliper Covers w/ 3.7 Logo - Front & Rear (11-14 V6)

Item 81136
Call a Mustang Enthusiast at 1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$0.00
Market Price $282.99 You Save 12% ($33.99)
Our Price

$249.00

FREE Shipping

Will this fit your Vehicle?

Select a different vehicle Help?
Update or Change Vehicle
In Stock

Ship to: Ashburn - 20149
Sorry, please enter a valid US or CA postal code
We're sorry, zip can't be updated at this time.
    Create a list
    Add to New List

    Saved - View your saved items

    We're sorry. We couldn't save this product at this time.

    Features, Video & Details

    • Great Custom Styling
    • 6061-T6 Aerospace Aluminum
    • Red Powder Coat Finish
    • Reduces Brake Dust
    • Easy Install
    • Fits 2011-2014 V6 Mustangs with 17" or Larger Rims

    Review & Installation Video

    Review & Install Video

    Hey I’m Justin with AmericanMuscle.com, and I’m checking out MGP’s front and rear caliper covers, fitting all 2005 and newer Mustangs. So here’s the deal, an aftermarket big brake kit is not exactly cheap, and painting your factory calipers can sometimes not give you the results you’re looking for. These covers from MGP are a great way to cover up those ugly factory calipers, while adding a little customization and helping to reduce the brake dust on your wheels. The covers are offered in a red or a black powder coat and with a number of different logo options. We have a couple here on the table including the red GT logo, the complete black Cobra setup, the red running Pony logo, and the black 5.0 logo, just to name a few. Taking a closer look at the calipers you’ll first notice a very durable T6 aluminum construction, along with that powder coated red or black finish. In addition we have the officially licensed logo right in the center, along with some simulated hardware for a more realistic look. The installation really isn’t all that bad and should take you about an hour from start to finish. Of course you will need to remove your wheels just to gain access to the calipers so make sure you have your jack handy. In addition you’re going to want to make sure 3/8” wrench just to tighten up the hardware on the covers themselves, but other than that everything is completely straightforward. So if you’re tired of looking at those rusty factory calipers and you don’t feel like forking out big dough for an aftermarket big brake kit, you’ll want to look into MGP’s caliper covers available right here at AmericanMuscle.com

    Custom Styling. Give your 3.7-powered V6 a race-ready, "big brake" look with a set of brilliant red Mustang Caliper Covers. Whether you're setting off some aftermarket rims or just adding some custom style, a set of caliper covers will give you a look that's sure to turn heads.

    Reduces Brake Dust. These Caliper Covers not only look fantastic, but they act as a dust shield to keep your rims looking cleaner longer.

    Quality Construction. MGP makes their Caliper covers from light weight 6061-T6 Aerospace Aluminum that is formed to the caliper for a perfect fit. The covers are then powder coated for a long lasting high gloss look. The installation brackets are TIG welded in place for extra security.

    Easy No Mess Install. Painting your calipers can be messy and time consuming, but the MGP Caliper Covers simply install over your stock calipers and are held in place with the supplied clip and bolt. For a no muss, no fuss install.

    Application. Designed to fit over stock brakes, this set of four MGP caliper covers include all the required hardware needed for installation on a 2011 or newer V6 Mustang.

    Fitment: 2011 2012 2013 2014 Details

    MPN# 10198SM37RD

    CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

    What's in the Box
    • (2) Front caliper covers
    • (2) Rear caliper covers
    • (8) Installation clips
    Installation Info
    Tech Specs
    Will it fit my Mustang?
    • V6 - 11, 12, 13, 14

    Technical Note. A minimum of 1/8 of an inch clearance between the wheel and the brake caliper is required for proper fitment. We have found that the MGP caliper covers will require the use of a small 5/16" spacer to provide proper clearance with our aftermarket Bullitt wheels, see drop down option above

      Customer Photos (92) Submit Your Photo

      View All 92 Photos

        Questions & Answers (13)

        5 Top Rated Questions

        Hey, Are these able to be painted? Im thinking about using G2 caliper paint on these. Thanks! :)

        • These are able to be painted but before painting, I would recommend consulting with a trusted paint shop to see what all would need to be done whether it is sanding, re-powder coating, priming, etc.

        Helpful (1)

        Does it fit Mustang v6 Pony package wheel? Mustang V6 2014 Pony Package Wheels

        • Yes, they will absolutely fit.

        Helpful (1) Show 1 more answer

        Caliper Covers and V6 Performance Package Will these fit on a 2013 V6 with the performance package

        • higgy i did a lil research, so far all the info ive been reading the red caliper covers will fit your 2013 V6 mustang with the performance pkg..

        Helpful (1) Show 1 more answer

        Can I get these, or any Caliper Covers that will fit my 14 V6, in Blue? I'd like to match my Deep Impact Blue Mustang.

        • At this time we do not offer the MGP Caliper Covers in blue. We carry the standard color offerings from MGP, of red, yellow, black, and matte black, however some special colors are available directly through MGP, including a blue, or color matching is also available through MGP, however this does get rather expensive.

        Helpful (0)

        I have 20" Black AMR Wheels on my 2014 mustang v6. Am I going to need spacers or will there be enough clearance?

        • There will be enough clearance to fit the MGP Red Caliper Covers on 20" AMR Wheels without needing a spacer.

        Helpful (0)
        Post Your Question
        8 More Questions
        Will these fit under 18 inch torque thrust m wheels? 1 answer
        Would these fit along with Item#32780 or would a spacer be required? 1 answer
        Its fit on Mustang V6 2017 ? 1 answer
        will these calipers fit on a 2014 Jack Roush package 1? 2 answers
        Will this fit my 2012 v6 mustang ? I have the performance package which upgraded the car to the gt's brakes. 1 answer
        will i need the spacers for the performance package with forgestar CF10 19" rims? 1 answer
        Do I need the 5/16" spacers? I have a 2014 V6 Mustang with the appearance package which includes the 18" painted black aluminum wheels. I was wondering if I need to purchase the spacers to install these caliper covers. 2 answers
        Will these fit on 2013 V6 with Performance Package I know the brakes are different on vehicles with the Performance Package. Will these covers fit a 2013 V6 with the Performance Package? 2 answers

          Customer Reviews (79) Write a Review

          Ratings Summary

          4.5 out of 5 overall rating from 79 customers

          Installation Time: Afternoon

          Installation Cost: 0-$100





          • May 19, 2019

            5 2013 V6 - Twindad Installation Time: Afternoon

            Great looking product

            This product was really easy to install and looks great when finished. My only complaint is the cost. This product should be much cheaper.

            Helpful (0)
          • April 18, 2019

            2 2014 V6 - tmmcentral100 Installation Time: Afternoon

            Caliper covers hard to install

            The brackets that attach the covers to the calipers were very hard to install. They rubbed on my rotors and it took quite a bit of modification to get them to fit properly. For $ 250 these were a horrible purchase. This will make think twice before I order from AM again.

            Helpful (0)
          • March 07, 2019

            3 2013 V6 - MichaelM Installation Time: Afternoon

            Look great

            Installation was crazy easy but the clips were rubbing in my rotors so I had to fix it like three times till I got it right .

            Helpful (0)
          • February 21, 2019

            1 2014 V6 - PeteF Installation Time: Shop Install Installation Cost: $100-$250

            Caliper clips and screws loosen due to heat

            Had Installed, barely fit on stock 2014 Mustang V6. Look good but front left wheel you can hear scraping when accelerating. Mechanic said need more clips, nuts and bolts to rectify or will need to bend and fit so issue goes away. Requested free replacement clips and hardware so mechanic can test. Not what I was expecting, if does not resolve will return.

            Helpful (2)
          • January 15, 2019

            1 2014 V6 - TerrellW

            Poor Quality

            Very disappointed in these. The hold on screws are not of high quality they break lose at 10 pounds of torque.

            Helpful (3)
          • December 03, 2018

            5 2013 V6 - RoyW Installation Time: Shop Install Installation Cost: $100-$250

            breaks

            outstanding Product, easy to put on and looks Fantastic!

            Helpful (3)
          • October 25, 2018

            5 2012 V6 - GregO Installation Time: Less than 1 Hour

            Looks awesome

            I get many compliments on the car with these covers. Love the look, definitely finishes out the car. Had my mechanic put them on - only took a matter of minutes.

            Helpful (4)
          • September 09, 2018

            1 2012 V6 - Rossco Installation Time: Afternoon

            they suck

            due to health reasons i did not get to install my covers untill mid july i followed the instructions to the letter ..however ,after 2500 miles i finially had to remove them..1] they rubbed when cornering do to wheel flexing.2] they kept working loose 3], they vibrated.4] they squealed and 5].was an embaressment to drive around with them on my car ... however they did look great,,as long as the car sat still... t

            Helpful (3)
          • August 23, 2018

            2 2014 V6 - DanielJ Installation Time: Less than 1 Hour

            Cool but flaws on the actual product

            When My calibers came in I super stoked up until I found finger prints in the paint which I was super bummed, could’ve sent them back but chose not to because it would’ve been a hassle to do so as always but overall cool product if your budgeting

            Helpful (4)
          • July 19, 2018

            5 2011 V6 - RobertP Installation Time: Shop Install

            Red caliper covers

            These went on just like the directions stated. Looks great!

            Helpful (5)
          • April 17, 2018

            1 2014 V6 - AndrewB

            Man oh man..

            So, I had bought some covers years ago for an older mustang, was perfect! I just bought some for my 2014 mustang. IT WAS BAD! The looks, yes, of course, as expected, looks great!! Install was easy.. HOWEVER.. they are not made correctly. they are too close to the rotor that when you tighten it, it makes contact with the rotor and you hear an awful scraping sound. AWFUL!!! It was just the rear wheels for me, I found that other people had this problem too. I had to take my wheels off and back on a total of 6 or 7 times to get it right. I tried bending it, twisting, not tightening too hard etc.. eventually, i used some spare washer and placed them btwn the cover and caliper as a spacer to keep the cover away from the caliper. That's what ended up working for me. First time experiencing this issue. They need to work on these dimensions or something, because it needs work. If i'm paying that much money for these, it should fit perfectly. I was very disappointed.

            Helpful (13)
          • March 13, 2018

            5 2011 V6 - RussellS Installation Time: Less than 1 Hour

            2011 Russstang

            I’m very pleased with the 3.7 MGP red caliper covers. I put them on my black 2011 behind Replica Bullitt Wheels. Lots of compliments! I was concerned a little about the thin clips holding the covers on while everyday driving, but I had nothing to worry about. They are on solid! I didn’t need the spacer either. Honestly, they cost a little too much, but then again if I needed to buy another set, I would pay the price. Thank you American Muscle for offering this item.

            Helpful (6)
          • February 28, 2018

            5 2013 V6 - BarronW Installation Time: Less than 1 Hour

            Caliper Covers

            Parts worked great and looked great. Owner very happy!

            Helpful (6)
          • February 25, 2018

            5 2014 V6 - AdolfoO Installation Time: Less than 1 Hour

            The Look

            First want to say the price is steep but it does transform the car. The majority of people paint the caliper and that just look cheap and ugly. The richer people buy big brake kits and middle settle for these. They make any color car pop and truly a great look. First set gave me an isssue with fitment but customer service fixed that gave me new ones.

            Helpful (6)
          • February 07, 2018

            5 2013 V6 - Oscar Installation Time: Afternoon

            Front and rear caliper

            Well product looks great, front caliper cover it was not problem, but rear i could not get it on, you know sometimes you are the lucky one LOL. other wise everything is great. it might be me that could not do it, but I will recommend to every one who wants something different. good luck. Thank you guys. u guys try to help me to get them on given advise for the rear ones . over all is great. took longer because the rear ones, other wise it would have take less than a hour

            Helpful (6)
          • December 08, 2017

            5 2014 V6 - JohnV Installation Time: Less than 1 Hour

            Fun Mustang

            Helped dress up the car. Buy the spacer with them as they will rub without them. Added Roush mufflers with it along with mustang strips on the side panels. All giving a regular car a sporting look. Helps make a poor mans care look like a sports car and we rumble into the neighbor hood.

            Helpful (6)
          • November 17, 2017

            5 2012 V6 - Godzukidan Installation Time: Afternoon

            Looks awesome

            They look awesome. My 2012 grabber blue V6 with stock rims looks like it has a big brake kit on it. The factory brakes are realy good and now they look awesome. Tight fitment on the 17 teens , but no tighter than my brothers 2013 GT with the 18 inch rims. Which also look great. Install time will be about an hour, but take the afternoon to test drive it after the installation. So maybe 2 hours tops.

            Helpful (5)
          • November 13, 2017

            5 2013 V6 - Mike Installation Time: Less than 1 Hour

            Excellent

            Easy install They look outstanding coupled with the cross drilled/slotted rotors. No issue install.

            Helpful (5)
          • November 13, 2017

            5 2014 V6 - Manny Installation Time: Shop Install Installation Cost: 0-$100

            Good looking

            It looks very nice with my new wheels and it goes with the ruby red color of my mustang.

            Helpful (5)
          • November 01, 2017

            5 2011 V6 - canuck Installation Time: Less than 1 Hour

            rd caliper covers

            For my black stang it was absolutely the icing on the cake!

            Helpful (6)

          Related Mustang Categories