(approx) 1 Hour
Simple installation for anyone.
- MGP Mustang Caliper Covers Installation Guide
- Customer Submitted:
- How to Install Caliper Covers on you Mustang GT and V6
$249.00 (set of 4)FREE Shipping
Features, Description, Reviews, Q&A, Specs & Installation
Fitment: 2015 2016 2017 2018 2019 2020 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
August 19, 2019
stopping never looked so good
they fit like they were made for this car. maybe they were.Helpful (0)
July 05, 2019
Love the Look
Took approx. 2 hours to install utilizing a floor jack with jack stand doing one wheel at a time. These covers installed pretty much as in the videos, but I had to resort to using a rubber mallet to install the bottom clips for the front calipers. I purchased 1/8" spacers at a competitive site as I could only find universal spacers at American Muscle. Wheel Spacer 1/8" Black 5-Lug Pair These spacers fit perfectly and I did not have clearance issues. All in all happy with the purchase and the way these covers look with my 19" Ford painted black wheels.Helpful (0)
June 15, 2019
Black Out Caliper Covers
Install on all four took probably 20-25 minutes each to get proper alignment. Make sure after you complete you take the time to ensure no rubbing before you tighten everything up and move on to the next wheel. Really upgrades the look and side profile of the factory wheels.Helpful (0)
May 26, 2019
Great fit, no clearance issues at all. I do have the 20 inch RTR wheels on mine. Really makes it pop!Helpful (0)
May 24, 2019
I really like the subtle pop appearance it gives the wheels.Helpful (0)
April 21, 2019
Purchased thesis to avoid painting my stock calipers. My mustang is a stock GT with the 4 piston calipers on the front and single piston on the rear. They look good online but when you install them, you can tell they are covers. Especially on the front calipers. When I installed them on the front calipers, I could still see parts of the stock caliper peaking out from behind the cover. And to top it off, the front caliper covers didn't fit. After I installed the front caliper covers and went to put the rim back on, I found out the rim rubs on the cover. The back caliper covers cleared the rim just fine, but as for the front, they rub on the inside of the rim. I made sure my mustang met all the requirements listed, I have 19" rims, and the Four piston caliper set up. All the instructions advises to to if the covers rub on the inside of the rims is to put a spacer in between the rim and rotor. And I'm not comfortable with doing that. So I'm returning these covers and painting my stock calipers.Helpful (2)
January 21, 2019
Awesome product and looks great to and verry simple to installHelpful (3)
November 01, 2018
Very subtle lookin
I have a silver mustang and with the black caliper covers it looks good not a lot of pop which is what I wantedHelpful (3)
October 09, 2018
Red Caliper covers
Looks good when completely finished, mounting clips are a bit fiddly. You need to grind some off all the front clips. As always I say it's over priced but I bought them. Should be in $100 - $129. Range. About 1 1/2 hours.Helpful (4)
October 05, 2018
MGP Black Caliper Covers
They look great behind the Foose chrome wheels. Would buy againHelpful (3)
Does it fit EcoBoost 2016 premium stock 20" wheels?
This kit here is only designed to work on the mustang GT's with 19" wheels or bigger and unfortunately would not be a guaranteed fit on a 2016 ecoboost premium mustang.
Does these covers available in the combination of Red with Black lettering. Available to export to AU
The MGP Red Caliper Covers are available to be shipped to Australia; you can start an international order by clicking the link below. However, we do not carry the caliper covers in red with black lettering. https://www.americanmuscle.com/shipping.html?intl=1
2016 Ecoboost Performance Pack brakes> Will these work instead of the standard Ecoboost covers?
The MGP Red Caliper Covers w/ Tri-Bar Pony Logo - Front & Rear will fit your Ecoboost mustang as long you have 19" wheels or larger and have the 4 piston brakes these will fit.
Will these covers work with these wheels? 19" Ebony Black Painted Aluminum Wheels - Stock with Black Accent Package for 2018 (No Performance Pack) Thank you!
Yes, they should work as long as the wheels are 18 inches or larger and the calipers are 4-piston.
This caliper cover fit on 2018 mustang gt?
Yes, this caliper cover will fit all 15-18 Mustang GT standard models (non-performance pack).
Yes, these covers will work with your 2016 GT Mustang. However, we would recommend test fitting as you may need a small spacer to allow clearance between the cover and the backside of the wheel.
We suggest a test fit for all wheels, regardless of the size of the wheel, as unfortunately there are cases where wheels 18 inches or larger don't happen to fit.
These caliper covers will only be for the GT models with the bigger brakes and will not fit your V6. However, we do have a set just like these for the V6 models. https://www.americanmuscle.com/calipercovers-red-pony-2015-v6eco.html
For the V6 you would need to caliper covers for the V6 brakes. Please make sure that with your new 20 inch wheels that they are not to concave that they interfere with the caliper covers. This would be the only fitment issue that we would foresee. https://www.americanmuscle.com/calipercovers-red-pony-2015-v6eco.html
These caliper covers will require at least a 19" wheel or larger for proper fitment. Now we will have one set of caliper covers that will work for the 18" wheels. I will link them to you below. http://www.americanmuscle.com/mgp-yellow-caliper-covers-gt-logo-front-rear-1517.html
Unfortunately, this kit only comes the Mustang lettering on the front calipers and the pony logo on the rear calipers.
If you have 6-piston caliper brakes, these will not fit. Otherwise these will fit with the standard 4-piston brakes with the 20x9 and 20x11 wheels.
The MGP Red Caliper Covers w/ Tri-Bar Pony Logo will require 19" Wheels or Larger.
While we cannot confirm fitment for Australian models, if the EcoBoost specs are the same as the MGP Red Caliper Covers w/ Tri-Bar Pony Logo - Front & Rear (15-17 GT) specs, they should be able to work.
(approx) 1 Hour
Simple installation for anyone.
What's in the Box
Does not fit 6-Piston equipped models.