Free Shipping On Orders Over $49. Details

Talk to a Mustang Expert
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $5,000 From Rovos! Enter daily!

Cervini's 2.5 in. Cowl Hood - Unpainted (10-12 GT, V6)

AmericanMuscle no longer carries the Cervini's 2.5 in. Cowl Hood - Unpainted (10-12 GT, V6). Please check out 2010-2014 Mustang Hoods for an updated selection.
This item currently can not be added to your cart. Please try again later.

Features & Details

  • Classic Cowl Styling
  • 2.5" Raised Center Cowl
  • Superior Lightweight Fiberglass Construction
  • Utilizes OEM Latch and Hinges
  • Unparalleled Cervini Quality and Fit
  • Fits 2010 to 2012 V6 and GT Mustangs
Classic Cowl Styling. Add classic muscle car styling to your modern Mustang with a Cervini Cowl Induction Hood. This muscular looking hood with it's 2.5" raised center cowl harkens back to the old school days of raw muscle car power.

Raised Center Cowl. The center cowl is raised 2.5" over the stock hood giving you added engine clearance and airflow when running applications such as aggressively large intake manifolds, or superchargers. Screened rear air vents on the cowl provide impressive airflow while keeping debris out from under your hood.

Relocates Windshield Washer Squirters. Cervinis knows that hood mounted windshield washer squirters can ruin the clean styling of their hoods, that is why they designed this hood to relocate the squirters under the hood to keep them out of sight.

Highest Quality Construction and Fit. Cervini hoods are made to the highest standards from extremely strong, lightweight fiberglass material for a perfect OEM fit with little to no prep work needed for installation.

Application. This Cervini Cowl Induction Hood utilizes the original OEM hinges and hood latch to bolt up in the stock location on any 2010 to 2012 or newer V6 or GT Mustang for classic styling.

Freight Notes. Freight items can only be shipped within the continental 48 states, no expedited methods. What is freight shipping? Your Answers are Right Here!.

Technical Note: AmericanMuscle recommends professional installation of all body parts. We also recommended test fitting these products before they are painted.

Fitment: 2010 2011 2012 Details

MPN# 1202

CA Residents: WARNING: Cancer and Reproductive Harm -

What's in the Box
  • (1) Hood
Installation Info
Tech Specs
Will it fit my Mustang?

You Might Also Like

Customer Photos (12) Submit Your Photo

View All 12 Photos

Questions & Answers (1)

1 Top Rated Question

have hood. when latched, with hood bumps run all the way up. not touching hood. suggestions?

  • Since the Cervini's 2.5 in. Cowl Hood is an aftermarket fiberglass hood, these will not always contact the hood itself. Typically with fiberglass hoods, we recommend using hood pins to secure the hood more thoroughly due to the nature of fiberglass.

Helpful (0)
Post Your Question

Recommended For You

Customer Reviews (7) Write a Review

Overall Rating 4.4

out of 5 stars

Installation Time:Full Day

Installation Cost:$100-$250

  • Fit 4.714286 4.7
  • Appearance 4.428571 4.4
  • Bang For Your Buck 4.285714 4.3

  • 1/5

    Installation Time: Shop Install

    Installation Cost: $100-$250

    September 11, 2018

    Not what I expected for the money

    I ordered this hood a few months ago. It was professionally painted by a reputable body shop in my town. As part of the prep the instructions said it would need to be left in the sunlight or baked for several hours in order to prevent shrinkage after paint was applied. All instructions were followed exactly. Two weeks later, the paint is cracking in one of the corners due to shrinkage. This product would be much better if it was cured fully before being shipped. Also the shipping was horrible. The hood showed up with damage on one of the corners, and a chunk missing out of the middle. The box that it came in was in pretty poor condition upon arrival


    Year: 2011 Submodel: GT

    Helpful (1)

  • 5/5

    Installation Time: Less than 1 Hour

    October 31, 2013

    Great look ;)

    Love the cowl hood!!! Once painted and put on I'm very pleased. This hood gives my ride a little more muscle and style you are sure to fall in love with. The extra room the cowl hood gives my ride will give me the added space to add more mods and great American muscle parts.


    Year: 2012 Submodel: GT Kinston, NC, USA

    Helpful (5)

  • 5/5

    Installation Time: Full Day

    August 29, 2013

    Nicely built aftermarket hoods better than the rest..

    I just recently bought 2 Cervini Cowl Hoods for 2 of my Coyote Mustangs. I have been through this before with some of my older Fox body Mustangs and bought cheaper hoods out of a magazine for around $245.00 and they took lots of prep work to even get them ready for primer/paint. I even had to add fiberglass to re-enforce the hoods where the hinges bolt to the hood because the threaded mounting holes were pulling out of the hood. That's definitely not the case this go round. These hoods come packaged in a very nice box and for no cost to ship if you have a commercial address. There is minimal prep work needed to paint these hoods and have them mounted on your car hours later with a perfect fitment. I wouldn't buy any other brand now. And AM's prices are very good compared to other sellers and I did my homework.


    Year: 2010 Submodel: GT Maryland, USA

    Helpful (3)

  • 5/5

    Installation Time: Shop Install

    Installation Cost: $250-$500

    July 07, 2013

    Cervini's 2.5in Cowl Hood

    My local ford body shop painted and installed my hood. They told me that mine was the fourth cervini's hood they had painted and installed. They said the prep on cervini's hoods was always minimal and fit perfect! I am very satisfied with the fit and look of my hood and the shipping was very fast!


    Year: 2012 Submodel: GT NC

    Helpful (3)

  • 5/5

    Installation Time: Shop Install

    Installation Cost: 0-$100

    June 22, 2013

    Looks Amazing!!!!!

    I had hail damaged so decided to get this hood to replace it. All i can say it's AMAZING!! It fits perfect no gaps and looks just great on my 12 v6. I highly recommend this product from AM!!


    Year: 2012 Submodel: V6 San Antonio, TX

    Helpful (3)

  • 5/5

    Installation Time: Less than 1 Hour

    April 19, 2013

    2.5 cowl hood

    The hood looks really good and adds a aggressive look. I had a body shop put my hood on and painted it. The guy said that this was one of the best fitting fiber glass hood with no modifications need. He cooked the hood like the directions said and then put it straight on my car. The lines look really close and the fit is good.


    Year: 2012 Submodel: GT Franklin KY

    Helpful (3)

  • 5/5

    Installation Time: Less than 1 Hour

    June 15, 2012

    Cervini Cowl Hood

    First off this hood is awesome. It adds and aggressive appearance to your front end and people will notice you coming down the highway. The fit was good with no major prep work needed before paint. Also, since its a 2.5'' cowl hood it does not block your view when you are driving. It is just the right height.


    Year: 2011 Submodel: GT

    Helpful (3)

Related Mustang Categories