Free Shipping On Orders Over $49. Details

Talk to a Mustang Expert
Every day 8:30AM EST - 11:00PM EST
Win $5,000 From Rovos! Enter daily!

Cervini's Stalker Hood - Unpainted (10-12 GT, V6)

AmericanMuscle no longer carries the Cervini's Stalker Hood - Unpainted (10-12 GT, V6). Please check out 2010-2014 Mustang Hoods for an updated selection.
This item currently can not be added to your cart. Please try again later.

Features & Details

  • Aggressive Stalker Styling
  • Scoop Opening Lowers Underhood Temps
  • Superior Lightweight Fiberglass Construction
  • Utilizes OEM Latch and Hinges
  • Unparalleled Cervini Quality and Fit
  • Made in the USA
  • Fits 2010 to 2012 V6 and GT Mustangs
Aggressive Stalker Styling. Add aggressive good looks to your Mustang with a Cervini Stalker Hood from AmericanMuscle. This Stalker hood features a pre-cut front scoop opening that helps lower under hood temperatures.

Relocates Windshield Washer Squirters. Cervinis knows that hood mounted windshield washer squirters can ruin the clean styling of their hoods, that is why they designed this hood to relocate the squirters under the hood to keep them out of sight.

Highest Quality Construction and Fit. Cervini hoods are made in the USA to the highest standards from extremely strong, lightweight fiberglass material and features a finished underside liner that can be painted for a show quality appearance. Cervini hoods utilize the original OEM hinges, latch, and hardware for a perfect OEM fit with little to no prep work needed for installation.

Application. This Cervini Stalker Hood utilizes the original OEM hinges and hood latch to bolt up in the stock location on the 2010 to 2012 V6 or GT Mustangs for super aggressive styling.

Freight Notes. Freight items can only be shipped within the continental 48 states, no expedited methods. What is freight shipping? Your Answers are Right Here!.

Technical Note: AmericanMuscle recommends professional installation of all body parts. We also recommended test fitting these products before they are painted.

Fitment: 2010 2011 2012 Details

CA Residents: WARNING: Cancer and Reproductive Harm -

What's in the Box
  • (1) Hood
Installation Info
Tech Specs
Will it fit my Mustang?

You Might Also Like

Customer Photos (9) Submit Your Photo

View All 9 Photos

More Products You Might Like

Questions & Answers (8)

5 Top Rated Questions

How much does this hood weigh? How much lighter or heavier is it than a stock hood?

  • The Cervini's Stalker Hood - Unpainted (10-12 GT, V6) weighs 46.2lbs whereas the stock hood without a scoop weighs 38lbs.

Helpful (1)

Why isn't this available for 2013 GT?

  • The stalker hood was changed for the 13-14 Mustang GT/V6 models due to the differences in the hood and front end of the vehicle. We do offer the 13-14 stalker hood though which can be found here:

Helpful (0)

Does the hoid flutter or shake because of the hole designed.

  • This hood will not flutter or shake while driving no!

Helpful (0)

Hood Strut Can a hood strut kit be installed on this hood such as the MMD Bolt on Hood Strut kit?

  • Yes

Helpful (0) Show 2 more answers

What grill insert is compatible with the grille? Since the hood doesnt come with the grille insert, which should we purchase?

  • I contacted Cervini and they sent me the grille mesh to use but it has to be cut to shape and possibly painted to wanted color again contact Cervini about this

Helpful (0)
Post Your Question
3 More Questions
Rain threw hood during driving While driving in rain. Will the rain come threw the hood and onto the motor. Since there is no where for it to go but in. I want to buy this hood but that has me thanking. 1 answer
What color primer does the hood come in? Can we choose what primer we want? 2 answers
ram air is this a functional ram air hood? 3 answers

People Who Bought This Item Also Bought

Customer Reviews (4) Write a Review

Overall Rating 4.2

out of 5 stars

Installation Time:Shop Install

Installation Cost:$500-$1000

  • Fit 4 4
  • Appearance 5 5
  • Bang For Your Buck 5 5

  • 4/5

    Installation Time: Shop Install

    Installation Cost: $250-$500

    March 19, 2017

    My little Nightmare..

    First, the shipping was late, twice. Then the shop said it needed a lot of work to get it right. The corner by the driversside windshield doesn't line up by about 3/8 of an inch. The windshield washer lines hang down. The hood shakes when driving down the road. It has been a Nightmare (now the name of the car) but it give the car attitude and I love it..!


    Year: 2010 Submodel: GT

    Helpful (9)

  • 4/5

    Installation Time: Shop Install

    Installation Cost: $500-$1000

    December 03, 2016

    Cervini Hood

    The Cervini Stalker Hood fit on the car well. Alignment with the top of the fenders wasn't perfect but acceptable without modification. There were a few ripples in the fiberglass that required sanding before painting to get a smooth finish. Windshield washer spray nozzles and bolts for installing the hood were included. Overall I'm satisfied with the product. The end result is nicer than the expensive OEM hood and won't rust on the front edge like the OEM hoods do. It would have been nice if they had put a screen over the opening in the hood to stop large objects from entering and done some sanding to make sure the finish surface was smooth and matched the shape of the fenders better.


    Year: 2012 Submodel: V6

    Helpful (10)

  • 4/5

    September 28, 2013

    Looks great

    Got this item a couple months ago. Looks great. When I'm traveling on the interstate it does move a little, so I'm not sure if that is supposed to happen. The opening does not have a grille which is unfortunate, especially with bugs and rain getting inside the hood. The wiper fluid sprayers also spray a little lower than I expected, but its not a huge issue. But, overall, it made a significant difference in the look, which is exactly what I wanted.


    Year: 2011 Submodel: GT Tampa, FL, USA

    Helpful (9)

  • 5/5

    Installation Time: Shop Install

    November 30, 2012

    Great Addition

    I put this hood on my 2010 Grabber Blue Mustang and it looks great! I am very pleased with the look, with one exception on the website it shows it having a grill insert for the opening of the hood and it does not come with one and Cervinis hasnt made one for this hood yet... Overall im very pleased with the hood just upsetting that they show it with the insert and there isnt one.


    Year: 2010 Submodel: V6 Westland, MI, USA

    Helpful (11)

    • Response from AmericanMuscle

      Our apologies for the incorrect image; it was one we had direct from Cervinis, but I will have it removed immediately. I'm glad to hear you were happy with the hood once installed though. I'm sure it looks awesome!

      Lisa, Customer Care

Related Mustang Categories