$6,000 Giveaway! Enter Now >

C&L Adjustable Bump Steer Kit (94-04 Mustang)

Find parts that fit my vehicle Item 426641
Shop Owners Save More! Sign up for our dealer program

    Product Information

    Features, Description, Reviews, Q&A, Specs & Installation

    Features

    • Help Eliminate Bump Steer Issues
    • Prevents Uneven Tire Wear
    • Fully Adjustable
    • Ideal for Lowered Mustangs
    • Aluminum and Steel Construction
    • Blue Anodized Finish
    • Fits 1994-2004 Ford Mustang Models

    Description

    Corrects Bump Steer. Eliminate bump steer by correcting the front end geometry of your lowered 1994-2004 SN95 Mustang with the help of C&L's Fully Adjustable Bumpsteer Kit. By replacing your stock, non-adjustable components with a C&L Bumpsteer Kit you will gain better, more predictable cornering and handling.

    Fully Adjustable. C&L designed their Bump Steer Kit to be fully adjustable using the included bushing spacers. This will allow you to fine-tune the bump steer geometry of your Mustang for improved steering response and crisp balanced handling.

    Straight Forward Installation. This C&L Adjustable Bump Steer Kit was designed to be a direct bolt-on replacement upgrade. Please note that an alignment is highly recommended after installation.

    Application. This C&L Adjustable Bump Steer Kit is designed to fit 1994-2004 Ford Mustang models.

    NOTE: Bump Steer is a change in toe angle caused by the suspension moving up or down. Bump Steer is built into the geometry of the suspension and steering system, and has nothing to do with turning the steering wheel. The effect of bump steer is for the wheel to toe-in or toe-out when the suspension moves up or down. This toe change or "steering" occurs any time the suspension moves, whether it is from body roll, brake-dive, or hitting a bump in the road. Bump Steer is undesirable because the suspension is steering the car instead of the driver. To fix a bump steer problem, you need to alter the height of the outer tie-rod relative to the steering rack with adjustable tie-rod ends, also known as a bump steer kit.

    C&L 426641

    CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

    Install Details & What's in the Box

    Installation Info

    Installation Time

    (approx) 2 Hours

    Difficulty Level:

    Light to Moderate mechanical skill required.

    Installation Guides

      No guide available for this part yet.

    What's in the Box

    • (2) End links
    • (2) Tapered shafts
    • (4) Nuts
    • (10) Bushing spacers

    Warranty

    C&L offers our valued customers the following Limited Warranty on all C&L product purchased after September 1st, 2026. What is Covered Subject to the terms, exclusions and limitations herein, and with respect only to products first sold in the United States, C&L warrants that its products shall be free of manufacturing defects for the lifetime of the product and finish defects, including rust & corrosion, for three (3) years from the date of initial retail purchase when the C&L product is installed and used on purchaser's vehicle according to supplied product installation instructions and/or warnings. This Limited Warranty is made only with respect to the initial purchaser and is not transferrable. C&L reserves the right to require proof of purchase as a condition of this Limited Warranty and to make future revisions to this product or its Limited Warranty without obligation to provide notice of same to purchaser or to conform existing product to future revisions. Any change to this warranty made after purchase may be applied retroactively at the sole discretion of C&L.

    Click Here for Full Warranty Info

    5.0

    Customer Reviews (7)

    Questions & Answers (1)

    Post Your Question