Guaranteed Free Delivery by 12/24! available on most items - Details

Talk to a Mustang Expert
Every day 8:30AM EST - 11:00PM EST
Win $3,000 In Mods!! Enter Daily!

Edelbrock Performer RPM II EFI Intake Manifold - Black (86-95 5.0L)

AmericanMuscle no longer carries the Edelbrock Performer RPM II EFI Intake Manifold - Black (86-95 5.0L). Please check out 2010-2014 Mustang Intake Manifolds and Plenums for an updated selection.
This item currently can not be added to your cart. Please try again later.

Features & Details

  • Boosts Horsepower and Torque
  • V-Shaped Crossover Design
  • Lightweight Aluminum Construction
  • Black Powder-Coat Finish
  • 8 Large Tapered Runners for Maximum Power
  • Tuning Recommended After Installation
  • Compatible with Stock Fuel Rails
  • Cold Air Intake Modifications May Be Required
  • Intended for Street and High-Performance Applications
  • 90-Day Limited Warranty
  • CARB Compliant
  • Fits 1986-1995 Ford Mustang 5.0L Models
Exciting Horsepower and Torque Gains. The Edelbrock Performer RPM II EFI Intake Manifold is designed to boost your Mustang's performance. This manifold demonstrates superiority over other designs in the 1500-6500 rpm range and provides increased horsepower and torque. Upgrading your Mustang to the Edelbrock Intake Manifold gives you a powerful launch off the starting line, intimidating your competitors.

Maximum Performance. With a V-shaped crossover design that incorporates an increased cross-sectional area and eight tapered runners, this Edelbrock Intake Manifold is created for maximum performance gains. It is ideal for both street and racing applications.

Tuning Recommended. Edelbrock recommends a tuning after installation of the Performer RPM II EFI Intake Manifold. A professional tuning will enable your vehicle to reap the maximum benefits of this upgrade.

Premium Construction. Fabricated from high-quality, lightweight aluminum, this Intake Manifold by Edelbrock is designed for durability. The black powder-coat finish adds a sleek and aggressive edge.

Straightforward Installation. This Edelbrock Performer RPM II Intake Manifold is designed to be a direct replacement for your factory intake manifold. Please note there are some restrictions on fitment: the manifold may not fit the factory hood or strut tower brace of the 1994 to 1995 Mustang.

Recommended Upgrades. Edelbrock recommends certain additional upgrades to maximize performance with this Intake Manifold. Note that 1994 to 1995 Mustangs require an upgrade to the Edelbrock EGR Spacer, Throttle Body Adapter, and Strut Tower Brace.

90-Day Limited Warranty. Edelbrock covers its Performance Series products with a 90-day limited warranty for defects in materials and workmanship. Some restrictions apply.

CARB Certified. The Edelbrock Performer RPM II EFI Intake Manifold is street legal in all 50 states.

Application. The Edelbrock Performer RPM II EFI Intake Manifold is designed to fit 1986 to 1995 Ford Mustangs models with a 5.0-liter engine, with the exception of 1994 to 1995 Mustangs with factory hoods or strut tower braces.

Fitment: 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 Details

CA Residents: Warning: California's Proposition 65

What's in the Box
  • (1) Intake Manifold
  • (1) Gasket Set
  • Installation Hardware
Installation Info
Tech Specs
Will it fit my Mustang?

You Might Also Like

Customer Photos

Questions & Answers (1)

1 Top Rated Question

will a 75mm throttle body with EGR spacer fit the Edelbrock Performer RPM II intake

  • Unfortunately, an EGR spacer and 75mm throttle body will not fit properly with this intake manifold.

Helpful (0)
Post Your Question

Customer Reviews (1) Write a Review

Overall Rating 5

out of 5 stars

Installation Time:Weekend

  • Performance Gain 5 5
  • Fit 5 5

  • 5/5

    Installation Time: Weekend

    January 15, 2018

    Great intake

    Put this intake on my 93 GT for 408 stroke of course you have to get a lower intake to fit the 351 Windsor great air flow


    Year: 1993 Submodel: GT

    Helpful (8)

Related Mustang Categories