Free Shipping On Orders Over $49. Details

Talk to a Mustang Enthusiast
1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $5,000 For Your Mustang! Enter Daily

MBRP 1-7/8 x 3 in. Long Tube Headers (11-20 GT)

Item 390860
AmericanMuscle no longer carries the MBRP 1-7/8 x 3 in. Long Tube Headers (11-20 GT). Please check out 2015-2020 Mustang Headers for an updated selection.

Features & Details

  • Gains of up to 44 HP and 28 TQ
  • 3-Inch Merge Style Spike Collectors
  • 1-7/8 Inch Primary Tubes
  • Mandrel Bent Tubing
  • 3/8-Inch Laser Cut Flanges
  • T304 Stainless Steel Construction
  • Bolt-On Design
  • Fits Left Hand Drive Models Only
  • Fits All 2011-2020 GT Mustangs
Boost Your Mustang's Performance. The road to getting the most out of your Mustang begins and ends with MBRP aftermarket parts and upgrades. These 1-7/8-inch Long Tube Headers provide maximum air flow, resulting in both performance gains and a powerful exhaust tone. When paired with other MBRP exhaust products, MBRP Long Tube Headers can deliver gains of up to 44 HP and 28 ft/lb of TQ over your stock system.

High Quality Construction. MBRP uses only the highest quality components and fabrication methods. These T304 stainless steel Long Tube Headers feature 1-7/8-inch mandrel-bent primary tubing that provides paramount durability and the smooth 3-inch merge style spike collectors ensure that airflow isn't disrupted. The 3/8-inch head flanges have been painstakingly laser cut to fit your 5.0L perfectly.

Intuitive Modular Design. Crafted with a unique modular design, these MBRP LTHs allow you to choose the exhaust combination that best fits your build. The highest gains have been seen when pairing these Long Tube Headers with an MBRP H-Pipe and MBRP Cat-Back System.

Installation. Designed to re-use your factory GT header gaskets, this set of two Long Tube Headers by MBRP include the necessary hardware to install them onto your 5.0L Mustang.

Recommended Upgrade. To realize the full power potential that these Long Tube Headers have to offer, AmericanMuscle recommends a custom tune with a Mustang Handheld Tuner to reprogram the vehicles computer (ECU) for proper operation.

Application. The MBRP 1-7/8 Inch x 3 Inch Long Tube Headers are specifically designed to fit all 2011-2020 GT 5.0L Mustangs and requires a MBRP 3-inch mid-pipe and cat-back for installation. For left hand drive models only.

Application Notes. For 2020 Ford Mustang GT models ONLY, a Ford Front Driver Side Oxygen Sensor will be needed to complete installation. This sensor is of longer length, you can easily use that sensor as a substitution for the shorter OE passenger side oxygen sensor during installation.

Fitment: Details

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

What's in the Box
  • (2) Long Tube Headers
  • (16) Flange Head Bolts
Installation Info
Tech Specs
Header Specifications
Header Type: Long Tube Type Mid Pipe Required: 3" Aftermarket
Material: T304 Stainless Steel Finish: Natural
Catalytic Converter: No Fitment: 2011-2017 GT
Will it fit my Mustang?

    Customer Photos (3) Submit Your Photo

    View All 3 Photos

      Questions & Answers (10)

      5 Top Rated Questions

      Will this bolt up to the MBRP race series cat back with the H-pipe.

      • Yes the MBRP Long Tube Headers will fit your left hand drive 5.0L with the MBRP mid pipe and cat back series.

      Helpful (1)

      Hello! Are these compatible with the Magnaflow Competition Cat-catbacks? Thanks!

      • Yes, these are compatible, however there may be some cutting and modification needed for a perfect installation. We generally suggest keeping with the same brand often as possible.

      Helpful (0)

      What happens to the cats if I use this with the MBRP mid pip and MBRP cat back exhaust? Are they deleted?

      • If you go with the off-road mid-pipe then the cats would be deleted yes.

      Helpful (0)

      Will these work with a ford racing xpipe on my 2018 GT premium?

      • Unfortunately, these headers are designed to work with the MBRP mid-pipe and exhaust and will not work with the Ford Performance X-pipe.

      Helpful (0)

      Will these headers fit directly on MBRP street cutbacks or is a converter or something else needed?

      • The MBRP 1-7/8 x 3 in. Long Tube Headers will require a MBRP 3" mid-pipe and cat-back for installation.

      Helpful (0)
      Post Your Question
      5 More Questions
      What XPIPE can be used with these headers? 1 answer
      Do these headers have cats? 1 answer
      Hello, will these fit Flowmaster American Thunder Axle-Back Exhaust? 1 answer
      Will these fit with Flowmaster outlaws catback 1 answer
      Is any modification (cutting/welding factory downpipe) necessary for installation? 1 answer

        Customer Reviews (6) Write a Review

        Overall Rating 4.5

        out of 5 stars

        Installation Time:Weekend

        • Loudness / Volume 5 5
        • Exhaust Note 4.5 4.5
        • Fit & Finish 3.5 3.5
        • Bang For Your Buck 4 4



        • 5/5

          Installation Time: Weekend

          April 26, 2019

          Worth every penny

          I bought the kit with the off road h pipe. Had professionally installed but I helped with most of it. If you get the please read the instructions, the hardware supplied replaces the studs, and I started putting the stock ones back in until I realized they are too long for these headers. The bolts that replace the studs are shorter and have a 13mm head, which is extremely hard to get a wrench on it on the driver side. Anyway it took us 13 hours on a lift with all snap on tools, but in the end it was worth it. The finish is excellent, the fit is great. The sound and power bring a smile to me every time. Got a pbd tune and an 18 manifold when I did this and it’s a beast compared to stock

          Mustangwes

          Year: 2012 Submodel: GT

          Helpful (1)

        • 2/5

          June 07, 2017

          2014 5.0 bmrp headers

          Installation is gonna suck the right passenger side rubs against the frame and makes a huge noise cause of the vibration .... sounds really good but man it was a pain ... like I said it rubs fitment is okay on the drivers side passenger rubs a lot ... also o2 sensors won't come off and u need a stud tool to takes the stud off took me the whole weekend

          Omar099

          Year: 2014 Submodel: GT

          Helpful (8)

        • 5/5

          September 01, 2016

          Super aggressive deep tone !

          These long tube headers really made the 2015 GT really have a deeper rumble and really opened up to make the mustang breathe and have better air flow. Installation was kind of long but make sure everything is sealed right and bolted on right from the engine to the Cat back exhaust. Overall it gave a nice tone and increased the horsepower and you can really feel a difference after installing these headers.

          Mustangshark

          Year: 2015 Submodel: GT

          Helpful (9)

        • 5/5

          September 01, 2016

          Awesome!!

          This piping is amazing. Excellent quality and I would definetaly recommend it

          Carbon

          Year: 2013 Submodel: GT

          Helpful (9)

        • 5/5

          August 31, 2016

          Loud growl

          These headers make your mustang growl! Amazing sound enhancement. A must have for any coyote engine to make it sound it's best!

          MustangMax

          Year: 2016 Submodel: GT

          Helpful (10)

        • 5/5

          August 31, 2016

          Must have for GT owners

          With this MBRP long tube headers, your car doesn't feel like a stock car anymore. I mean these headers bring so much out of your pony that you will feel that each penny spent on it is well worth it. Great product.

          Sunny

          Year: 2016 Submodel: GT

          Helpful (7)