(approx) 1 Hour
Simple installation for anyone.
$159.99 (pair)FREE Shipping
Features, Description, Reviews, Q&A, Specs & Installation
Fitment: 2015 2016 2017 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
July 19, 2019
Looks good just have to play with it to get it fitting rightHelpful (0)
June 11, 2019
A different look
MMD Hood Vent Scoops - Unpainted (15-17 GT). Gives your coyote a different mean look!Helpful (0)
March 18, 2019
Well my fear came true the fitment on this never sat in the hood correctly and after one ny winter off it goes. The 3m tape is not going to hold it down and the 2 screws not enough it flexed a lot and since had them painted I couldn't return them. I have no idea why mmd did not use the original template. Love the way it looked so I'll give it another try.Helpful (0)
February 21, 2019
Pre-Painted Hood Vent Scoops
I bought the MMD Hood vent scoops sometime ago and wanted to wait awhile before I wrote a review. I was quite happy with the paint job overall. The color match to my pony was perfect! Only issue I have with the product is not enough hardware to secure. I had to get a little creative and "MacGyver" it to the hood. But after it was on, I couldn't deny how nice they look! I get quite a few compliments on it when I'm pumping gas or out and about... Glad I got it for the most part.Helpful (2)
January 09, 2019
Great addition cood quality perfect color match easy to install love the aggressive look it gave my carHelpful (1)
September 28, 2017
Hood Scoops Look Nice
I am happy with the way the hood scoops look and the paint matches exact to my Race Red. The only thing to be aware of is the company would makes this only gives you 1 clip for each scoop, which they are not good clips at all and aren't enough to hold in place at high speeds. What I did and recommend you if you purchase these scoops is go by double sided sticky tape and outline where the scoop will go into place, then go to autozone and buy 4 new clips that fit much tighter than the one's given. Then you will need to go home depot and buy 4 screws, washers and nuts that will fit the holes on the new clips you buy. With doing all that the scoops fit super tight and now I have no worry of them blowing off at high speedsHelpful (15)
August 13, 2017
Only thing good about the scoops was the paint job the fit was very poor and the material was to lightweight Waste of money took them off after one weekHelpful (10)
July 29, 2017
If you have a cold air intake with an open box, you have to tape the vent off before you can wash your car or your filter will get drenchedHelpful (12)
July 26, 2017
Warping hood scoops
I got these last year, I love the look and also with the JLT CAI air is forced in through them. Of lately I'm noticing the 2 back outside corners don't sit flat to the hood. Now I'm noticing I'm having the same issue with the front outside. Not happy with the look, I will be calling A/M soonHelpful (11)
July 24, 2017
2015 RR not a perfect color match
looks great. not a perfect color match. Tried to return them but I was told since my car was 2 years old, the color has faded that's why the hood scoops didn't match. Because I ordered them pre-painted they wouldn't let me return them. my car has 5500 miles on it and it has always been garaged. I will not buy anything pre-painted again unless its black.Helpful (10)
Has anyone with these installed seen any significant increase or decrease in intake air temp? Cylinder head temp? Thanks.
These will reduce the intake air temps once it is installed.
Hi, I have a echo bust 2016. Is this vent suitable for my car? If not, what vent scoop will be suitable for the echo bust 2016?
Unfortunately, the Ecoboost does not come with the heat extractors in the hood so these scoops will not work.
Pre-Painted but does it also get the clear coat that is on the OEM hood?
The MMD Hood Vent Scoops do have clear coat, however, it is not the same clear coat used at the painting facility at Fords manufacturing facility. The clear coat is just as durable as the OE clearcoat, and the scoops do receive multiple coats for a high-gloss, protective finish.
Is there enough surface area on the backside of these scoops to apply 2 way tape and mount them on a hood with no existing factory scoops?Thanks.
There is some surface area on the backside of the MMD Hood Vent Scoops but seeing as that was not the way it was meant to be attached, so we unfortunately can not guarantee that it will stay attached.
These facing the opposite way would allow air to rush in while driving. What about rain??
The MMD Hood Vent Scoops will allow air into the engine bay as well as rain water, however due to the angle, the rainwater allowed in would be minimized, and this will not fall onto anything directly that is not waterproof or water resistant.
You should not have any issues driving in the rain with these hood vents. If you are concerned about water getting in the engine bay, you can always make a custom duct work to lead any water away from the filter and fuse box.
The MMD Hood Vent Scoops will allow air into the engine bay as well as rain water, however due to the angle, the rainwater allowed in would be minimized, and this will not fall onto anything directly that is not waterproof or water resistant. T
This will only fit 15-17 GTs, and has only been tested on left-hand drives.
This will only work with the factory hood, and will not fit with aftermarket hoods.
The MMD Hood Vent Scoops will not create any trouble codes or light error messages. We have been made aware of several sets that have warped, however this appears to have been corrected in all of MMD's recent batches.
This pair of Pre-Painted MMD Hood Vent Scoops are designed to fit 2015 to 2017 GT Mustangs equipped with the factory heat extractor hood. Any cutting or modifications we would not be able to guarantee fitment.
The color option will absolutely be your choice over all but if you would like an option for glossy straight black for your MMD Hood Vent Scoops, I would suggest the Black- UA paint code. This will allow for a straight black gloss finish.
We currently do not have the MMD Hood Vent Scoops available in the White Platinum Metallic at this time.
If you have a Mustang that is was equipped with Turn Signal Lights in the factory hood vents, these MMD Hood Vent Scoops will eliminate the use of those lights.
These vent scoops are designed to fit with the factory heat extractor hood. They do feature an opening that will vent out the heat from the engine bay.
(approx) 1 Hour
Simple installation for anyone.
What's in the Box
Fits Mustangs equipped with the vented factory GT hood.