Installation Time
(approx) 15 Minutes
Difficulty Level:
Simple installation for anyone.
Installation Guides
FREE 1 to 3-Day Delivery on Orders $119+ Details
$56.99 (pair)
FREE Shipping on orders over $119 Market Price $70.99 You Save 20% ($14.00) Up to 10% off for Military & First Responders! See DetailsAdd Local Shop Installation
Saved - View your saved items
We're sorry. We couldn't save this product at this time.
or use
The MP Concepts LED Rear Side Markers that we have here will appeal to all 2015 through '17 Mustang owners who wanna completely black out the markers themselves while at the same time adding some unique LED lighting in the process. Now, the MP Concepts kit will include two markers for right around 60 bucks and the install will be a simple plug and play job, so therefore expect pretty soft one out of three wrenches on the old difficulty meter here, gang, and I'd say a few minutes in the knockout from start to finish.All right. So, first things first, guys. I do wanna point out that if you're just simply looking to smoke the rear marker lights on your S550, you can still certainly save a bunch of money and just go with the traditional vinyl tint instead. In fact, you can tint just about every exterior light on your S550 Mustang using the AM Graphics Smoked Tint Kit here on the site for roughly 15 to 20 bucks less than the MP Concepts markers that we have here. Now, on the other hand, if you really dig that smoked or, in this case, blacked-out look but you'd also like to add some brightness through a modern LED along with a unique light pattern, then the MP Concepts options that we have here might just be worth a look.Now, let's talk a little bit more about that unique pattern because, unlike the factory markers that utilize a single goal incandescent bulb, the MP options are gonna utilize a high-intensity LED strip that's going to illuminate down the center of the marker itself. Now, compare that to, again, those factory housings with the incandescent bulbs and especially ones that's been covered with a smoke vinyl, you're essentially gonna get that one lone bright spot right in the center while the rest of the markers just, kind of, dead or dim for lack of a better word.Now, those high intensity LEDs are gonna be housed in the ABS plastic base here along the backside before being topped off in this very dark-smoked, almost black, polycarbonate lens. Now, the housings themselves and the basic shape will essentially be a carbon copy of the factory marker lights, so therefore, there's gonna be no modification needed to get these guys installed. Furthermore, there is no wiring needed whatsoever here, guys. Everything is completely plug and play, which is gonna lend itself to that one out of three wrench rating the site gives these when it comes time for the installation. Speaking of which, now we wanna give you a better idea of what it takes to get the MP Concepts lights installed on your S550 at home. So, without further ado, check out our detailed walkthrough now.So, the first step of this install is gonna be to remove the factory side marker light. It's a very simple process and there's no tools required. All you have to do is reach your hand up back behind the bumper and push on the tab located closest to the wheel and remove the light, then disconnect the connector. So, let's get started.All right. Now that we have the side marker light out of the vehicle, all we're gonna do is twist the light bulb socket to the right and move the socket, pull the bolt out. And now we can just make the connection just like we were replacing a light bulb. Tack our wires back into the light and twist it into place. So, now we can just reconnect our light and snap it into place. And that's it.And that's gonna wrap up this review and install of the MP Concepts LED Rear Side Marker Lights for your '15 to '17 Mustang. Thanks for watching. And for all things Mustang, keep it right here at americanmuscle.com.
Features, Description, Reviews, Q&A, Specs & Installation
Fitment:
MP Concepts 406766
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Installation Info
Installation Time
(approx) 15 Minutes
Difficulty Level:
Simple installation for anyone.
Installation Guides
What's in the Box
10 More Questions