Ridetech SLA Short-Long-Arm Suspension System for Aftermarket K-Member (79-93 Mustang)

This bolt-in SLA (Short-Long-Arm) suspension system replaces the stock McPherson strut design with a billet aluminum upper control arm, tubular lower arm and spindles with S550 Mustang hubs. The factory strut design offers very little camber gain and poor overall geometry. This design greatly improves negative camber gain, which positions the tire perpendicular to the pavement through the corners without the need for excessive static camber and overly stiff spring rates. Caster, roll center and Ackerman angles were also optimized. Compatible with either Ridetech Coil-Overs or Shockwave air suspension (sold separately).

Features

Incorporates an upper control arm to induce much needed negative camber gain.

Caster, roll center, bumpsteer and Ackerman angles are optimized.

Bolt-in frame surrounds create attachment points for the upper control arms and the shocks, this keeps the load on the frame rails for maximum strength and reduced NVH.

Upper and lower arms feature Delrin bushings infused with Teflon to minimize stiction and eliminate the need for lubrication.

Spindles includes Moog S550 Mustang rear hubs for maximum strength, consistent braking and reduced maintenance.

Lower control arm design improves tire clearance and steering angle, 30 degree’s with up to a 275mm wide tire.

Fitment:

• 1979 Ford Mustang
• 1980 Ford Mustang
• 1981 Ford Mustang
• 1982 Ford Mustang
• 1983 Ford Mustang
• 1984 Ford Mustang
• 1985 Ford Mustang
• 1986 Ford Mustang
• 1987 Ford Mustang
• 1988 Ford Mustang
• 1989 Ford Mustang
• 1990 Ford Mustang
• 1991 Ford Mustang
• 1992 Ford Mustang
• 1993 Ford Mustang

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov