Guaranteed Free Delivery by 12/24! available on most items - Details

Talk to a Mustang Enthusiast
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $5,000 For Your Mustang! Enter Daily
In Time For Christmas These & Many More

SR Performance Cold Air Intake, 70mm Throttle Body & EGR Spacer (89-93 5.0L)

Item 99709
AmericanMuscle no longer carries the SR Performance Cold Air Intake, 70mm Throttle Body & EGR Spacer (89-93 5.0L). Please check out 1986-1993 Foxbody Mustang Cold Air Intakes for an updated selection.
Call a Mustang Enthusiast at 1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P

Features & Details

More Horsepower And Torque. Replace that restrictive stock intake and throttle body with a SR Performance Cold Air Intake and Throttle Body Combo Kit from AmericanMuscle for more horsepower and torque. This combo kit will greatly improve your engines incoming airflow path to produce more useable power and to increase throttle response.

70MM Bore. Your 5.0's stock throttle body is a restrictive 56mm, choking off airflow and keeping your Mustang from giving you everything it has. But this SR Performance throttle body and matching EGR spacer features a generous, free flowing 70mm single bore design for significantly more air to feed the fire under your hood.

Reusable Filter. SR Performance designed their Cold Air Intakes with a reusable high flow cotton air filter. So no there is no need to go out and buy a new filter every few thousand miles. Just clean the filter, re-oil it, save money, and go!

Easy Bolt-On Installation. This SR Performance Intake Combo Kit is designed to be a straight forward install with just basic hand tools. No extra modifications or special tools are required for a simple 2 hour installation.

Application. This SR Performance 70mm Throttle Body with EGR Spacer and Cold Air Intake Combo Kit is specifically designed to fit the 1989 to 1993 5.0L V8 equipped Mustangs, including the LX 5.0, GT and SVT Cobra models.

Application Note. 70mm throttle bodies work great on stock or mildly modified 5.0 Mustangs, if you already have or are planning on more aggressive modifications, you may want to consider SR Performances 75mm kit.

SR Performance

Fitment: Details

CA Residents: WARNING: Cancer and Reproductive Harm -

What's in the Box
  • (1) Throttle body
  • (2) Two Gaskets
  • (2) Two Bolts
  • (2) Two washers
  • (1) One o-ring
  • (1) EGR Spacer
  • (3) Gaskets
  • (2) Nuts
  • (2) Lock Washers
  • 3.5" Straight Through Coupler (1)
  • 3" Straight Through Coupler (2)
  • 65mm - 89mm Hose Clamp (4)
  • 78mm - 101mm hose clamp (3)
  • 3.5" Pipe (1)
  • 3" Pipe (1)
  • Fender Shield (1)
  • Mass Air Flow Bracket (1)
  • Cone Filter w/ Open End (1)
Installation Info
Tech Specs
Will it fit my Mustang?

    Customer Photos (6) Submit Your Photo

    View All 6 Photos

      Questions & Answers (8)

      5 Top Rated Questions

      Rob, this was what I found on the BBK 70mm, Technical Note. This BBK product is not legal for use in emission restrictive states, and the item # is 56048 but your saying that it has a CARB. I just want to make sure I can smog my car after I get this installed. Thank you

      • The BBK 1500 (item number 56048) will carry CARB EO # D-245-17 making this California Smog legal. The CARB EO document can be found here:

      Helpful (0)

      so what is legal in calif for a throttle body w/egr spacer. I have a 1992 mustang.

      • At this time, the only Throttle body/EGR spacers we carry that are CARB Certified are from BBK, Such as the BBK 70mm Throttle body and EGR spacer item number 56048

      Helpful (0)

      is this item carb legal I'm form California.. thanks in advance

      • Unfortunately, the SR Performance CAI & 70mm Throttle Body w/ EGR Spacer does not have a CARB EO number and would not be legal in California.

      Helpful (0)

      Does this kit (cold air intake) come in gloss or matte black finish?

      • The SR Performance CAI & 70mm Throttle Body w/ EGR Spacer is a gloss finish.

      Helpful (0)

      Tune Required?

      • There is no tune required for this kit, however, a tune would help the car out overall reach its full potential with these parts installed.

      Helpful (0)
      Post Your Question
      3 More Questions
      Will this bolt right on to my trick flow upper and lower intake track heat? 1 answer
      CA Legal? 1 answer
      Will this fit my 88? It shows 89 and up 1 answer

        Customer Reviews (10) Write a Review

        Overall Rating 4.5

        out of 5 stars

        Installation Time:Afternoon

        • Performance Gain 4.333333 4.3
        • Fit 4.111111 4.1

        • 4/5

          Installation Time: Less than 1 Hour

          October 22, 2018

          Looks great

          I bought this to get rid of my stock look, it looks amazing and installs pretty easily, the bend from the throttle body does hit the sick tower though. Other than that its a good product


          Year: 1993 Submodel: GT

          Helpful (1)

        • 3/5

          Installation Time: Weekend

          January 07, 2018

          Worth it, or not worth it?

          Ok, to start off, let me start by saying you will see a gain in performance. 100 was able to tell a difference. Now let me also put in here that this thing was a pain in my a** to install. They state that it is a direct fit to the Fox but along the way MANY adjustments were needed. The rubber housing to seal the CAI to the throttle body would not fit over the 70mm throttle body for my life. I resorted to a heat gun and a series of softballs to get it to the point were I could just barely fit it over. My second issue I ran into was the strut tower. The CAI would knock into it and prevented me from closing the hood all the way. Eventually I was able to just barely fit it. And perhaps the bigger pain was the actual throttle. The throttle snaps up into the lower portion of the throttle body via a little bearing. Being an automatic I have “two” throttle cables. One side fit snug into the throttle body perfectly, the other one would not go in place without filing it down to fit. Overall do not buy this product unless you have patience. I ended up dropping’s several bolts down the engine bay out of frustration. Good luck.


          Year: 1993 Submodel: LX

          Helpful (5)

        • 5/5

          Installation Time: Full Day

          December 20, 2017

          Great Kit

          Good kit, install is not too complex, the power difference on a stock car is not too much however the car sounds like a whole new engine


          Year: 1991 Submodel: GT

          Helpful (4)

        • 4/5

          Installation Time: Afternoon

          September 16, 2017

          CAI 70mm

          Definitely has better throttle response. Had to adjust kick down. But took me longer because my intake studs we're corroded in the EGR spacer and throttle body. But the intake tube does hit the shock tower sadly


          Year: 1990 Submodel: LX

          Helpful (4)

        • 5/5

          Installation Time: Afternoon

          August 10, 2017

          Sr performance

          This is a great set up, it really wakes up the car!


          Year: 1989 Submodel: GT

          Helpful (3)

        • 5/5

          Installation Time: Less than 1 Hour

          April 19, 2017

          Great Upgrade

          It's a great upgrade over the stock throttle body. It was an easy install and would recommend to other Fox owners


          Year: 1989 Submodel: GT

          Helpful (3)

        • 5/5

          Installation Time: Less than 1 Hour

          November 07, 2016

          Sr performance cold air intake and egr spacer

          Great fit and finish looks great. Just be aware that you will still need a mass air flow sensor if you don't have one.


          Year: 1986 Submodel: GT

          Helpful (4)

        • 5/5

          September 11, 2016

          Notable Performance

          After the install everything started as normal but when I stepped on the throttle for the first time it didn't feel normal, it felt like a new beast. Definitely noticeable and will make you giggle at how much it actually improves your ride.


          Year: 1993 Submodel: Other

          Helpful (6)

        • 5/5

          Installation Time: Less than 1 Hour

          May 31, 2015

          SR Performance Cold Air Intake Review

          The product was good and did give an increase in power


          Year: 1987 Submodel: Other West Windsor , NJ

          Helpful (4)

        • 4/5

          Installation Time: Less than 1 Hour

          May 29, 2015

          Sr cold air

          Excellent fit and great bang for the buck. Install was easy and super smooth. I've already recommended this kit to my friends.


          Year: 1990 Submodel: Other Silver Spring, MD

          Helpful (5)

        Related Mustang Categories