Review & Install Video
Hey guys, Stephanie with AmericanMuscle.com, here with these Polished Speaker Trim Rings for the 2015 and up S550 Mustang. Sometimes the little touches can go a long way and I'd say the same is true for the speaker trim. They give a subtle way to tie in the tweeter and mid-range speakers with trim that resembles the rest of the bezels in the S550's interior.
Normally, these speakers don't have any kind of trim, so these trim pieces just help to tie everything together. So there are two different sets of trim here, there's tweeter speaker trim rings, one for each side and also mid-range speaker trim rings. They are sold separately and these are two piece with an inner and an outer ring.
They're made from 304 stainless steel, so you're not going to have to worry about these cracking or breaking and you can see they have a mirror polished finish. The mid-range speaker trim is not exactly like the bezel rings that come factory in the S550 since they do have the two piece design but they are similar and we're going to install these, as well as the tweeter speaker trim, in a minute, so you can see for yourself how they'll both look in the interior.
The two piece design might not be exactly what you're looking for but I would say that it definitely adds depth to the appearance without being distracting or adding too much. If we look closer at the tweeter speaker trim rings, these are one piece and like the mid-range speaker trim, these are also not exactly like the factory bezels either but they do match the mid-range speaker trim, which works nicely because they're both in view at the same time.
These are a flat trim while the other bezels in the interior are rounded but like I said, we'll show you how they look when they're installed in a second. As far as price, the mid-range speaker trim rings cost right around $30 and the tweeter speaker trim rings cost just a few dollars less. So, a touch over $50 for a set of both of these trim pieces, just to add a little touch of something to tie everything together in the interior.
And as far as the install, it's very easy and straight forward. A 1 out of 3 wrenches and probably about 10 minutes for each set of trim rings, so if you're installing both, you're looking at 20 minutes. Both sets of trim rings install the same way, the only difference is the mid-range speaker trim is going to have that two-piece design with the smaller ring fitting inside of the larger ring.
Both sets of trim come with a primer to help you properly prime the surface so the trim will stick. There's really only some 3M tape holding these on there but you're still going to want to make sure the surface is prepped properly and doesn't have any kind of dash detailing product on it. A quick and easy test to see how well the surface is prepped would be to take a piece of masking tape, stick it on there, and see how easily it comes off.
If the masking tape peels off easily, or doesn't stick at all, then you know you still have some type of product on there that needs to come off. You can always use a little bit of alcohol to wipe off the surface. Once the surface has a tack to it, you'll just use the adhesion promoter that comes with the kit.
The adhesion promoter alone won't be enough to get these to really stick, so like I said, just make sure you don't skip the cleaning stuff and then just use the promoter so that the bonding will be reliable. After this, it's just a matter of peeling the red liner off of the back of the 3M and lining the part up for the install.
Once the bonding area touches, you probably wont be able to peel it off and re-position it, so just take your time to make sure you have it all lined up before you stick it on there. Just press firmly over the entire surface to bond the part and that's really it. So, like I said, a very easy install.
Wrapping things up here, these are Polished Tweeter and Mid-Range Speaker Trim Rings that have a 304 stainless steel construction and a bright mirror polished finish to match the factory gauge bezels of the S550 Mustang. They're easy to install and they just add a little something to the interior. You can check them out more online. And for all things Mustang, keep it right here at AmericanMuscle.com.
Complete the unfinished appearance of your S550 Mustangs factory interior with a set of Polished Tweeter Speaker Trim Rings. These speaker ring bezels match the existing bright work of your Pony's interior for a clean sharp custom presentation.Superior Construction.
Manufactured in the USA from high quality 304 stainless steel for superior strength and durability, these Mustang Tweeter Speaker Trim Rings are completed in a brilliant mirror polished finish that will not tarnish, fade or rust.Easy Peel And Stick Installation.
Simply peel the two sided 3M tape from the back and set in place over top of the A-pillar mounted Tweeter Speakers for an easy 5 minute installation. Go from plain boring factory to show winning custom in just minutes.Application.
These Polished Stainless Steel Tweeter Speaker Trim Rings are designed to fit all 2015 to 2019 Ford Mustangs, including the V6, EcoBoost, GT and Shelby GT350 models. Sold as a set of two rings.
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
- What's in the Box
- (2) Tweeter Speaker Trim Rings
- Adhesive Promoter
- Installation Info
Installation Time: (approx) 10 Minutes
Difficulty Level:Simple installation for anyone
- Tech Specs
- Will it fit my Mustang?
- Bullitt - 19
- GT - 15, 16, 17, 18, 19