Installation Time
(approx) 1 Hour
Difficulty Level:
Simple installation for anyone.
FREE 2 or 3-Day Delivery on Orders $119+ Details
$13.99
FREE Shipping on orders over $119 Market Price $35.64 You Save 61% ($21.65)Saved - View your saved items
We're sorry. We couldn't save this product at this time.
or use
Hey, guys. Today, we're going to be taking a look at and installing the American Muscle Graphics Headlight Corner Tint for 2015 to 2017 GT V6 and EcoBoost Mustang. This is a precut piece of vinyl that's designed to perfectly fit the 2015 to 2017 headlights. It's a great option for someone who wants to tone down that corner reflector or someone who wants to add a little bit of a dark look or a smoke look without completely tinting the entire headlight and taking the chance of dimming down some of that visibility. This kit costs about $20 and it's very easy to get installed. I'll call it a one out of three wrenches on the difficulty meter.The vinyl is rated for up to five years of outdoor use and it has a gloss black finish, but optically clear. It's still gonna allow 80% of light to travel through but once again, you are only tinting this corner of the headlight here. All right, guys, to start your install, you're going to want to have a few things. You have a supplied squeegee, you'll have your vinyl, they are side specific, so when you go to peel off, just make sure you're working with the correct side. You're also going to want a microfiber towel and a nice soap and water mixture. What you're gonna want to do is you're gonna wrap your squeegee in the microfiber. You don't want to take just the squeegee to the tint because you run the risk of scratching the tint. And we'll make sure that we are working with the correct side. We're going to peel the tint off the backing. We'll spray the back of the tint with the soap and water mixture. We're gonna spray the adhesive side. And then we're also going to spray the corner of the headlight.One other thing before you guys get to this part, you're going to want to make sure the surface is as clean as possible. We already went ahead and cleaned up our headlight. We want to make sure there's no wax or anything on there so that this can adhere properly. So, our soap and water mixture is actually going to allow us to position this correctly on the headlight and move it around, so it's not going to stick right away, So, this gives us a chance to line this up properly and get it installed. So, we have it placed on there pretty nicely and what I'm doing now is I'm going to start just working some of the soap and water mixture out from behind the vinyl so I can get the sitting evenly. All right, now I'm going to take my squeegee wrapped in the microfiber and just start working the vinyl. At this point, I still have the opportunity to peel up any of corners like I just did to release any of the bubbles.You guys can always use a heat gun too if you want to. In this case, we don't necessarily need one. This vinyl fits really well and we're not trying to get it to conform to any kind of crazy surface. If you do want to speed up the adhering process, then I would recommend you use a heat gun. Because at this point, the car will need to sit for a little while, especially if you plan on washing it or driving it. You're going to want to make sure all of the moisture is out from behind the vinyl. So, the install for the other side is going to be exactly the same, we have our squeegee wrapped in our microfiber. Take the soap and water mixture, spray the corner of the headlight, and the back of the vinyl too. All right, then we will get this positioned on the headlight. And then once we get it lined up to where we want it to be, we'll go ahead and start working out the moisture from behind the tint. Once again, if you guys want to speed up the drying and the adhering process, then you definitely want to use a heat gun. In this case I'm not because we're working with a really flat piece and I don't have to worry about taking my car out as a daily driver or trying to wash it right after this. So, this tint is made from five mil PVC vinyl, it's really nice because it's a nicer quality. The quality of the vinyl that you're working with makes a big difference in the ease of install and how it looks after it's installed. All right guys, that's going to wrap up this review and install. Keep in mind you can always check this kit out more online, right here at americanmuscle.com.
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
Fitment:
SEC10 401106
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Installation Info
Installation Time
(approx) 1 Hour
Difficulty Level:
Simple installation for anyone.
What's in the Box
10 More Questions