(approx) 5 Minutes
Simple installation for anyone.
- Customer Submitted:
- Self Adhesive Emblem and Badges Installation Guide
$6.99 (each)FREE Shipping on orders over $75
Saved - View your saved items
We're sorry. We couldn't save this product at this time.
Justin: The SpeedForm 3.7 Emblem that we have here today in black would be a great choice for owners looking to proudly display what's under the hood of that 2011 and newer V6 Mustang or maybe even for five-liter owners looking to fool unsuspecting Camaro owners. Now, the emblem will be completed in a gloss black finish and will include the preinstalled 3M tape on the back all for right around the $20 price point for the individual emblem. So technically, this emblem is a universal fit piece meaning you could stick it on whatever you wanted to but I would argue most people probably shopping for this thing are those 2011 through 2017 3.7 V6 owners and you wanna advertise that 3.7 powerplant on the fender. Now if you do take the time to browse the customer reviews and customer images which you totally should, then you'll also notice there are a good bit of 2011 and newer five-liter Coyote owners who also have thrown this thing on their rides to try and fool people out there for whatever reason. Hey, at the end of the day, it's your car, it's your money, you can do whatever you want.But regardless of what vehicle you have in mind for the emblem, let's talk about what you can expect. Now first and foremost, guys, these are sold individually for right around that $20 price point in a couple of different finishes. For instance, we have the gloss black option here. Certainly, nice and shiny but if you prefer, there is also a matte black option on the site as well. Now both emblems are going to measure just over 4.5 inches long and just over 1.5 inch high. Now the back of each emblem does come with that 3M tape preinstalled for you which is gonna make for a very easy peel and stick install. In fact, site's gonna correctly call this a soft one out of three wrenches on the difficulty meter, maybe five minutes of your time to complete from start to finish. But to give you guys some pointers on how the job will go down, here's an AM customer to walk you through it now.Man: Here's some of the stuff I used. I used a heat gun in order to soften up the glue of the old badge, some fishing wire in order to separate it, Goo Gone in order to remove any excess glue that was on the back, a cloth to wipe it off, a knife, soap and a bucket of water. All right, guys. So today we're going to replace our badge. We're gonna use a blow-dryer or a heat gun or whatever you have available and we're gonna be about 4 to 6 inches apart so we don't damage the paint. And we're gonna be in a consistent motion for 15 seconds up and down. So, let's get started. We're doing this so we can get the glue in the back loose and we're gonna go ahead and get our string. This is a fishing wire. So, we're gonna go left and right. Just make sure you're gonna go ahead and get all around there. There are gonna be two prongs, one here and one here. So, we're gonna go for the stuff in the bottom now. There we go. You can see it's starting to get loose already. Might be easier depending on how worn out your car is, how many miles it has but there you go. Easy. Take it off. Now we can go ahead and use some Goo Gone. So, you can go ahead and remove that. Some of it might be easy to take off already. So, let's go ahead and apply some.All right. And then we're ready to go ahead and wash it off about...maybe about a minute or so. And we're gonna let it set. All right, now that about a minute or two has gone by, we're gonna remove any excess glue with a cloth and let's see here. If you have any excess glue on there still, go ahead and reapply it, wait a minute or two and then dry it off. Make sure that service area is clean. That way when you apply the badge it's a nice, good bond. All right, let's go ahead and get our badge. And you're gonna get a knife because I find it easier to go ahead and separate it. So, I'm just gonna go ahead and cut it right there. Now pull it off. And you will have two spots available to put it on in order to cover the holes. So, you can apply it on the left side where the three is at or where the seven's at like that. So, I'm gonna put it right here. Make sure you put it on nice and flat. Boom. All right. And then put even pressure all across. Do that for about 10 seconds.Justin: So, whether you're looking to proudly display what's under the hood of that 3.7 or you're looking to fool unsuspecting owners into a race with your five-liter, the SpeedForm Emblem here in gloss black would be a great and affordable way to do so and you can grab yours right here at americanmuscle.com.
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
(approx) 5 Minutes
Simple installation for anyone.
What's in the Box
10 More Questions