(approx) 15 Minutes
Simple installation for anyone.
- Customer Submitted:
- How To Install an MMD Fuel Door on Your 2010-2014 Mustang
Hey, guys, Stephanie with AmericanMuscle.com, here with my review of MMD's Billet Aluminum Fuel Doors for 1994 to 2014 Mustangs.These fuel doors from MMD are a nice option for the Mustang owners out there that could be looking for a way to have a little something more than a plain fuel door. MMD offers two different finishes, black or chrome, and some different logos, such as the FOOSE logo, as well as options that have the Mustang logo like this one here. The logos are engraved and they aren't over the top, and won't wear off like a decal would. I think these fuel doors are nice because they're subtle but different, and the logos are actually licensed lettering, not some knock-off lettering that's not going to look good.Like I said, you can choose between either black or chrome, plain or with a logo. The black fuel doors are anodized, while the chrome ones are a triple-plated chrome finish. They're all billet aluminum, like I mentioned, but another nice thing here is that these have a magnetic clasp and striker plate, which are going to help make sure these things stay shut when you're out there doing Mustang things. And as far as price, you're looking at between $100 and $200 for one of these.It isn't hard to get this fuel door on your 'Stang, so it's a one out of three wrenches, and should only take you about 15 minutes to complete. You'll need a few different tools, but the surprise is the drill with a ¼" drill bit so you can drill out the factory plastic shroud for the new fuel door. And I just use a rag to help contain the plastic bits that are drilled out. This does come with instructions, so just follow those and you should have no problem with this.So overall, the MMD Billet Fuel Doors are just a little way to upgrade your fuel door from the factory plastic one. You have a few different styling options, they're all billet aluminum, very easy to install, and a magnetic clasp and striker plate to make sure they stay closed. But as always, be sure to check these out more for yourself and see what you think. I'm Stephanie, and for all things Mustang, keep it right here at AmericanMuscle.com.
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
Fitment: 2010 2011 2012 2013 2014
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
September 27, 2019
Billet fuel door
I built a 2013 Shelby Mustang Terlingua. The rear quarter window has a black out panel with faux rivets. To match this appearance, the fuel door with rivets is perfect.Helpful (0)
June 18, 2019
Super fule door
Got the Fuel door as a Father's Day gift. Install took 15 minutes and fits and looks great. Easy install and instructions were clear and concise. My wife even likes it.Helpful (1)
May 17, 2019
Dress up the GT500
Simple mod for my 2014 GT500. But it makes it look so much better. Great product from MMDHelpful (0)
May 16, 2019
Easy install and looks good has a good Matt black finishHelpful (0)
May 12, 2019
Fuel door cover mod
Installed the other day took a little longer than expected. Hardest part was getting the rubber gasket around fuel filler neck. Looks greatHelpful (0)
February 26, 2019
The rubber around the neck was the toughest part but was well with it..Helpful (1)
January 22, 2019
Easy to install, looks great. Nice finish. Didn't take to long to install.Helpful (3)
January 18, 2019
MM Black Bullet Aluminum Fuel Door
Is worth buying and is easy to put on makes the car looks niceHelpful (3)
December 29, 2018
Looks and works great
Other than the absolutely ridiculous price of this product,it fit great and looks even better. Follow the instructions and all went well. The little silver screws on the outside will need to be retightened. The hardest part is putting the rubber seal properly around the fill pipe. Took two of us and a little spray of “Tire Wet” and a flat screwdriver to gently but firmly to get it in place. The rest is pretty simple.Helpful (4)
November 28, 2018
It's okay but maybe mins was faulty
All the little Allen bolts that you can see on the outside were either loose or barley in. Go to lightly tighten them and three strip had to JB weld them in place. And ended up doing the same to the rest It's an ok product but not for $130 I like the way it looks thoHelpful (4)
Black? So exactly what type of black is this; shiny, flat, matte?
Why does almost every comment say that the fuel door turns bronze? This part was back ordered for almost a year. I really like it and would consider buying it , but is there a problem with the black billet material? You also said you can get lettering on this part, but that is just for the chrome ones, what about black with the white Mustang lettering engraved? I have asked these questions before about the material being defective and engraving, but have yet to receive a definite answer
This item was out of stock while the manufacturer was making updates due to the issues that were happening in the past. We do have new stock on the MMD fuel door where the paint will not turn. We do have this same fuel door with the lettering here: https://www.americanmuscle.com/mmd-black-mustang-fueldoor-0509.html.
Will this fuel door work with the capless fuel system? Also, can you order these with any Shelby or GT500 lettering? Thanks.
Yes, this will work with the capless system. Unfortunately, we cannot order them with any different lettering other than what we show on the website.
The video says you can get it with the white Mustang lettering or plain, I don't see anywhere where you offer that
We do offer this with lettering found here: https://www.americanmuscle.com/mmd-chrome-mustang-fueldoor-1014.htmland a plain chrome here: https://www.americanmuscle.com/chrome-fueldoor-1013.html
Ford locking gas cap Will this fuel door work with the Ford locking gas tank filler tube lock?
yes it will this product is great
(approx) 15 Minutes
Simple installation for anyone.
What's in the Box