Customer Reviews (10) Write a Review

Overall Rating 4.5

out of 5 stars

Installation Time:Afternoon

• Handling Improvement 4.875 4.9
• Fit 5 5
• Bang For Your Buck 4.75 4.8

• 1/5

  July 21, 2018

  Missing bushings

  I've just received the box and the bushings are missing from the package. There was an open empty smaller box in the main box, looks like they were intentionally taken out.

  AleksandarT

  Year: 2006 Submodel: V6

  Helpful (1) Thanks for your input!

  • Handling Improvement 5

    5

  • Fit 5

    5

  • Bang for your Buck 5

    5
• 4/5

  Installation Time: Less than 1 Hour

  March 04, 2018

  Review from BMR Rear Sway Bar - Red (05-10 Coupe)

  BMR Rear Sway Bar

  This is a good product and you feel the difference over stock. However still just one suspension part won’t make your car entirely better with its suspension

  07CaliGT

  Year: 2007 Submodel: GT

  Helpful (3) Thanks for your input!

  • Handling Improvement 4

    4

  • Fit 5

    5

  • Bang for your Buck 5

    5
• 5/5

  Installation Time: Afternoon

  January 16, 2018

  Thumbs Up

  I am surprised that the BMR Rear Sway Bar is so underrated in regards to the lack of ratings on AM. This rear sway bar is solid and added a considerable amount of comfort to the over all feel and drive. I can not compare it to the stock bar because the rear sway bar had been removed from my mustang before I bought it, so I was going from nothing to a much sportier aftermarket bar. With that being said it really tied in my whole suspension. Unlike some of the other aftermarket sway bar this set up uses two end-links and two bushings connected to the same bracket as the rear socks. Which is the same design as the original sway bar designed for the s197 suspension set up. Some other aftermarket options connect end-links on the end of the bar which then connect to the bracket the rear shocks are attached too. I did the install on my back with jacks and it was very straight forward, did not take long. I did go to a hardware store and get new bolts for the end-links because I did not have the original bolts. Over all I am very happy with this purchase, I should of done this awhile ago.

  Christian

  Year: 2007 Submodel: V6

  Helpful (3) Thanks for your input!

  • Handling Improvement 5

    5

  • Fit 5

    5

  • Bang for your Buck 4

    4
• 5/5

  Installation Time: Less than 1 Hour

  December 31, 2017

  Review from BMR Rear Sway Bar - Red (05-10 Coupe)

  Very nice!

  After installing this along with upper and lower control arms the back end really stiffened up. I can take corners no problem and launching I get a lot less wheel spin

  TylerK

  Year: 2005 Submodel: V6

  Helpful (3) Thanks for your input!

  • Handling Improvement 5

    5

  • Fit 5

    5

  • Bang for your Buck 5

    5
• 5/5

  Installation Time: Less than 1 Hour

  July 27, 2017

  Review from BMR Rear Sway Bar - Red (05-10 Coupe)

  Improved Handling

  My car handle the curves a lot better. No more of that " riding on a kite feeling". Very impressed with the quality. It only took me about 45 minutes to install.

  DennisD

  Year: 2006 Submodel: GT

  Helpful (3) Thanks for your input!

  • Handling Improvement 5

    5

  • Fit 5

    5

  • Bang for your Buck 5

    5
• 5/5

  September 26, 2016

  BMR Rear Sway Bar Installation

  My GT was already lowered and had a host of performance parts already installed by the previous owner including panhead bar, 1" lowering springs, 295/35/20 tires in rear, upper strut brace among other things. Strangely most folks choose to install the sway bar modification first since it represents the biggest bang for the buck. I corrected the logic and installed the rear sway bar in about 1.5 hours. What a major difference it makes. About as good as a solid rear axle can get now.

  450GT

  Year: 2005 Submodel: GT

  Helpful (4) Thanks for your input!
• 5/5

  August 08, 2016

  Huge improvement over stock!

  Is well made with the highest quality! Much stiffer over stock and has greatly improved the cornering ability of my Mustang. I'm running this with the Steeda front and I couldn't be happier. Easy to install and comes with all the necessary hardware. The billet ends are beautifully crafted and are quipped with grease fittings.

  Nico

  Year: 2010 Submodel: GT

  Helpful (4) Thanks for your input!
• 5/5

  Installation Time: Shop Install

  June 26, 2016

  Great Item

  This has really helped significantly with the handling of my mustang. If you want to improve the handling of ur car, this is the way to do it

  ChillWill

  Year: 2007 Submodel: V6

  Helpful (4) Thanks for your input!

  • Handling Improvement 5

    5

  • Fit 5

    5

  • Bang for your Buck 5

    5
• 5/5

  Installation Time: Less than 1 Hour

  December 10, 2015

  It is a purchase fantastic

  100 recommend it since it is a good weight giving much stability and support on the back preventing quality slipping on the auto side... really and finishes are great, and its installation is very easy.

  ArturoJ

  Year: 2006 Submodel: V6 Miami, FL

  Helpful (5) Thanks for your input!

  • Handling Improvement 5

    5

  • Fit 5

    5

  • Bang for your Buck 4

    4
• 5/5

  Installation Time: Less than 1 Hour

  May 04, 2012

  Easy install and quality product

  Install was a breeze. Kinda wish it came with some grease but oh well a quick trip to pep boys fixed that. Works great.

  Bill

  Year: 2006 Submodel: GT Exton, PA

  Helpful (3) Thanks for your input!

  • Handling Improvement 5

    5

  • Fit 5

    5

  • Bang for your Buck 5

    5