Free Shipping On Orders Over $49. Details

Talk to a Mustang Enthusiast
1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $15,000!! Enter Now
Coronavirus: We are Open For Business, Prioritizing health and safety Learn More

MGP Black Caliper Covers with 5.0 Logo; Front and Rear (10-14 Standard GT, V6)

Item 81131
Call a Mustang Enthusiast at 1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$0.00
Market Price $282.99 You Save 12% ($33.99)
Our Price

$249.00

FREE Shipping

Will this fit your Vehicle?

Select a different vehicle Help?
Update or Change Vehicle
In Stock

Ship to: Ashburn - 20149
Sorry, please enter a valid US or CA postal code
We're sorry, zip can't be updated at this time.
    Create a list
    Add to New List

    Saved - View your saved items

    We're sorry. We couldn't save this product at this time.

      Review & Installation Video

      Hey I’m Justin with AmericanMuscle.com, and I’m checking out MGP’s front and rear caliper covers, fitting all 2005 and newer Mustangs. So here’s the deal, an aftermarket big brake kit is not exactly cheap, and painting your factory calipers can sometimes not give you the results you’re looking for. These covers from MGP are a great way to cover up those ugly factory calipers, while adding a little customization and helping to reduce the brake dust on your wheels. The covers are offered in a red or a black powder coat and with a number of different logo options. We have a couple here on the table including the red GT logo, the complete black Cobra setup, the red running Pony logo, and the black 5.0 logo, just to name a few. Taking a closer look at the calipers you’ll first notice a very durable T6 aluminum construction, along with that powder coated red or black finish. In addition we have the officially licensed logo right in the center, along with some simulated hardware for a more realistic look. The installation really isn’t all that bad and should take you about an hour from start to finish. Of course you will need to remove your wheels just to gain access to the calipers so make sure you have your jack handy. In addition you’re going to want to make sure 3/8” wrench just to tighten up the hardware on the covers themselves, but other than that everything is completely straightforward. So if you’re tired of looking at those rusty factory calipers and you don’t feel like forking out big dough for an aftermarket big brake kit, you’ll want to look into MGP’s caliper covers available right here at AmericanMuscle.com

      Product Information

      Features, Description, Reviews, Q&A, Specs & Installation

      Features

      • Great Custom Styling
      • 6061-T6 Aerospace Aluminum
      • Black Powder Coat Finish
      • Reduces Brake Dust
      • Easy Installation
      • Fits 17 in. Wheels and Bigger
      • Not Compatible with Brembo Calipers
      • Fits 2010-2014 Ford Mustang GT and V6 Mustangs

      Description

      Custom Styling. Give your Mustang a race-ready, "big brake" look with a set of black Mustang Caliper Covers. Whether you're setting off some aftermarket rims or just adding some custom style, a set of caliper covers will give you a look that's sure to turn heads.

      Reduces Brake Dust. These Caliper Covers not only look fantastic, but they act as a dust shield to keep your rims looking cleaner longer.

      Quality Construction. MGP makes their Caliper covers from light weight 6061-T6 Aerospace Aluminum that is formed to the caliper for a perfect fit. The covers are then powder coated for a long lasting high gloss look. The installation brackets are TIG welded in place for extra security.

      Easy No Mess Install.
      Painting your calipers can be messy and time consuming, but the MGP Caliper Covers simply install over your stock calipers and are held in place with the supplied clip and bolt. For a no muss, no fuss install.

      Application. Designed to fit over stock brakes, this set of four MGP caliper covers include all the required hardware needed for installation on 2010-2014 GT and V6 Mustangs. Does not fit Shelby GT500, BOSS 302 or Brembo equipped GT models.

      Fitment: 2010 2011 2012 2013 2014 Details

      MPN# 10198SM50BK

      CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

      4.5

      Customer Reviews (39)

      Write a Review

      Ratings Summary

      4.5 out of 5 overall rating from 39 customers

      Installation Time: Less than 1 Hour





      • September 29, 2019

        3 2011 GT - MadStang5oh Installation Time: Less than 1 Hour

        It's okay

        For the money it's honestly not worth it for a couple pieces of metal. Quality and detail on them isn't the greatest. Looks good from far lol

        Helpful (0)
      • September 20, 2019

        5 2013 GT - Smoke1 Installation Time: Less than 1 Hour

        Great buy

        Good looking product install was easy. I would definitely buy these again

        Helpful (0)
      • February 01, 2019

        5 2014 GT - JustinN

        5.0 brake covers

        Looks great on 2014 gt. Really matches my black.american muscle rims.

        Helpful (2)
      • December 27, 2018

        3 2011 GT - JesusC Installation Time: Afternoon

        Black caliper covers

        They looks good but the rear colipers didnt fit very well, I couldn't install one of them because it was too loose and it was making a lot of noise when I was driving my stang. I dont really recomend them sorry.

        Helpful (4)
      • July 17, 2018

        4 2014 GT - PeterD Installation Time: Afternoon

        Looks great

        Install was simple enough and the finished product looks amazing.

        Helpful (6)
      • June 27, 2018

        1 2002 GT - JudsonS

        Not good

        Didn’t fit properly and even had one fall off, the clips that hold the covers scrape against the roters every now and then, and even make a terrible scraping sound. Wouldn’t recommend unless you plan on using something to sand the clips down.

        Helpful (8)
      • March 04, 2018

        5 2012 GT - CliffC Installation Time: Less than 1 Hour

        Simple to install

        Looks so much better than the dirty calipers. Took 20 minutes. A Must have.

        Helpful (9)
      • February 07, 2018

        5 2012 GT - KelliH1986 Installation Time: Afternoon

        MGP Caliper Covers

        I ordered these for my 2012 and love them. Because of the aftermarket rims I have I did have to order some spacers for the rear wheels. I put the two front ones on and they look great.

        Helpful (9)
      • December 10, 2017

        5 2012 GT - BrianW Installation Time: Afternoon

        5.0 emblems

        Very nice product and very easy to install. Had back right clip rubbing on roater uses extra lock washer to solve rubbing. The caliper covers give it a great look.

        Helpful (9)
      • June 08, 2017

        5 2014 GT - barnacle989

        Completes the look

        Great look, like it came that way from the factory. Very easy to install. Maybe a little too expensive but I like it.

        Helpful (9)

      Questions & Answers (5 answers)

      5 Top Rated Questions

      what are the wheel spaces for?

      • A minimum of 1/8" clearance between the wheel and the brake caliper is required for proper fitment. We've found that these covers require the use of a small 1/4" spacer to provide proper clearance with our aftermarket Bullitt wheels. That is why we have the accessory option drop down. Hope this answers your question!

      Helpful (1)

      Will these fit behind Saleen style 5 spoke rims sold through AM? The fronts are 18x9 and the rears are 18x10

      • This will work with stock brakes on 2010-14 GT & V6's.

      Helpful (0)

      Do I need spacers for AMR wheels? I am buying the 19x8.5/10 wheels (AMR Black), do I need the spacers for these??

      • You will not need wheel spacers for the MGP Black Caliper Covers w/ 5.0 Logo - Front & Rear (11-14 GT, V6) when you use them in conjunction with the Staggered AMR Black Wheel & Tire Kit - 19x8.5/10 as the wheels will clear without rubbing.

      Helpful (0)

      Will these cause the brakes to overheat?

      • While I've never put a temperature gauge on them, I can say that I drive pretty aggressively and use the heck out of my brakes and haven't experienced any brake fade. At least not more than I had stock. I've had them for over a year and have had no warping or problems of any kind.

      Helpful (0)

      Caliper Covers from 05-09 I recently traded my 09 GT for a 13 GT and took my covers off the 09, will these fit on the 13 GT as well, aren't they the same size? Thanks

      • The brakes for a 2005-2010 are a slightly different size than the ones that are on the 2011-2014, the MGP Black Caliper Covers w/ 5.0 Logo - Front & Rear (11-14 GT, V6) will work only for those years and the 2009 MGP Black Caliper Covers will not work on a 2013 GT.

      Helpful (0)
      Post Your Question

      Installation & What's in the Box

      Installation Info

      What's in the Box

      • (2) Front Caliper Covers
      • (2) Rear Caliper Covers
      • (8) Mounting Clips

      Tech Specs

      Will It Fit My Mustang

      • GT - 10, 11, 12, 13, 14
      • V6 - 10, 11, 12, 13, 14

      Does not fit Shelby GT500, BOSS 302 or Brembo equipped GT models

      Technical Note. A minimum of 1/8 of an inch clearance between the wheel and the brake caliper is required for proper fitment. We have found that the MGP caliper covers will require the use of a small 5/16" spacer to provide proper clearance with our aftermarket Bullitt wheels, see drop down option above

          Related Mustang Categories