Win A 2018 RTR Spec 3 Mustang Enter Now!
Talk to a Mustang Expert
1-888-332-7930
Mon - Sun, 8:30 AM EST - 11:00 PM EST

2 More Days for Free Shipping! Get it by Dec 24th available on most items - Details

Cervini's Ram Air Hood - Unpainted (15-17 GT, EcoBoost, V6)

Market Price $899.99 You Save 11% ($100.00)
Our Price

$799.99 (each)

+ $99.00 Handling Fee with FREE Shipping
  • Item 390836
  • MPN# 1232

In Stock Ships same business day. Choose options to add to cart

Features & Details

  • Ram Air Scoops with Heat Extractor Louvers
  • Air Craft Grade Fiberglass Hood
  • Polyurethane Heat Extractor Louvers
  • Provision on Louvers for 2016-2017 Factory Hood Turn Signals
  • Underhood Channel to Disguise Hoses & Wiring
  • Uses Factory Hinges, Latch & Washer Nozzles
  • Made in the USA
  • Ships Unpainted
  • Fits 2015-2017 GT, EcoBoost and V6 Mustangs
Bold Enhancement. If your goal is to put fear in the eyes of fellow commuters when they glance in their rearview, then you'll want to invest in this Ram Air Hood by Cervini's. Utilizing massive front ram air scoops and dual rear heat extractor louvers, this upgrade will provide better air flow throughout the engine bay, releasing heat and keeping under hood temps down. Not only is this hood fully functional, but it adds a nasty, get out of my way demeanor to the front end of your 2015-2017 Mustang.

Underhood Cool Down. Keeping the temperature in the engine bay down is a great way to increase the overall performance of your Pony. Coupling a pair of functional ram air scoops with a pair of louvered heat extractors, this Ram Air Hood accomplishes just that. By allowing cool air in through the two large openings up front and letting hot air escape from the dual rear extractors, your engine will run much cooler.

Turn Signal Provision. If your Mustang came off the assembly line with the classic hood mounted turn signals, have no fear. This replacement hood features provisions within the rear heat extractor louvers, allowing reinstallation of your factory hood turn signals. Combine that classical 60s styling with this modern, aggressive hood for a killer exterior appearance upgrade.

High Quality Construction. This S550 Hood is made to the highest standards from extremely strong, air craft grade fiberglass material. High quality polyurethane heat extractor louvers are easily adhered to the hood with 3M double sided tape to provide a secure bond. An integrated underhood channel keeps washer hoses and turn signal harnesses out of sight, providing a super clean, car show ready addition to your 2015-2017 Mustang.

Direct Replacement. Unlike some other aftermarket hoods, this Ram Air Hood has been designed as a direct fit replacement without any small caveats. In other words, you won't have to worry about any trimming, cutting or drilling, fidgeting with hinges or latches or needing hood pins to hold it down. This Cervini's Hood installs using the factory hood hinges, striker bar and latch, as well as factory prop rod. Not only that, it utilizes the Ford windshield washer nozzles and keeps them out of plain view.

Application. Made in the USA, this Cervini's Ram Air Hood is designed to install on any 2015-2017 V6, EcoBoost or GT Mustang. Does not fit GT350 or GT350R models.

Technical Note. AmericanMuscle recommends professional installation of all body parts. We also recommend test fitting these products before they are painted.

Freight Notes. Freight items can only be shipped within the continental 48 states, no expedited methods. What is freight shipping? Your Answers are Right Here!.

Fitment: 2015 2016 2017 Details

What's in the Box
  • (1) Cervini's Ram Air Hood
  • (2) Hood Vent Inserts
  • (1) 5 ft. Guide Wire
  • (1) Roll VHB Tape
  • (4) Screws
  • (1) Zip Tie
Installation Info
Will it fit my Mustang?
  • EcoBoost - 15, 16, 17
  • GT - 15, 16, 17
  • V6 - 15, 16, 17

Does not fit GT350 or GT350R models

People Who Bought This Item Also Bought

Most Helpful Reviews

4/5
Amazing hood, make sure to get the vent.

First off, this hood is amazing, the white picture in the thumbnail doesn't really give it justice to show how aggressive and mean this hood is. I would have to say it is THE meanest hood that has been ...

Read More
Helpful (7)

5/5
Cervini Hood

Hood looks great really makes the car look different

Helpful (2)

Overall Rating 4.4 out of 5 stars
Read All 15 Reviews

Customer Photos (28) Submit Your Photo

View All 28 Photos

You Might Also Like

17 Questions / 4 Answers

Ask a Question

Can the hood be used unpainted? Or does it need to be painted before it can go on?

AlexG

  • The Cervini's Ram Air Hood will arrive in a gel coat finish. this is designed to be cleaned, prepped, primed and painted, but can be used unpainted. keep in mind the gel coat finish will not match any paint color and will have less of a gloss finish than a painted hood.

    Rob D

Helpful (1)

Will this hood work with hood strut kit, or only the prop rod? Thanks.

JohnC

  • The Cervini's Ram Air Hood will work with some aftermarket hood struts. You will need to check with the manufacturer of the struts to see if yours will work with aftermarket hoods.

    Ricky36

Helpful (0)

Can the stock hood vent with the build in blinkers be transferred to this hood and does it come with the latch system or does that get transferred as well to the new hood?

JosephR

Will I need the windshield washer placement adjuster if this hood is purchased? I have a 2017 V6.

JoshuaS

  • Yes, the Cervini's Ram Air Hood - Unpainted (15-17 GT, EcoBoost, V6) would require a nozzle relocation kit which transfers the fluid nozzles to the wipers themselves. Most aftermarket hoods do not have the spots for them, so this makes it so you don't have to drill into the hood! We do offer the SpeedForm Squirter Nozzle Relocation Kit which can be found here https://www.americanmuscle.com/nozzle-relocation-0510.html.

    AMBill

Helpful (0)

Can this hood be wrapped instead being painted, say in a carbon fiber type wrap.

redhotboss

  • This hood would be able to be wrapped instead of painted yes.

    Ricky36

Helpful (0)

Will the Ford Performance struts work with this hood?

TerryR

More Products You Might Like

Customer Reviews (15) Write a Review

Overall Rating 4.4

out of 5 stars

Installation Time:Weekend

Installation Cost:$250-$500

  • Fit 4.461538 4.5
  • Appearance 5 5
  • Bang For Your Buck 4.461538 4.5



  • 4/5

    Installation Time: Shop Install

    Installation Cost: $250-$500

    June 30, 2017

    Amazing hood, make sure to get the vent.

    First off, this hood is amazing, the white picture in the thumbnail doesn't really give it justice to show how aggressive and mean this hood is. I would have to say it is THE meanest hood that has been made for the S550 so far. The day I had it put in, you wouldn't believe how many necks were turned, it really changes the appearance of the mustang. The Heat extractors work so well that on a hot day you will actually see the steam coming through the vent. Now the NEGATIVE. YOU HAVE TO BUY THE AIR DUCT VENT, I don't think AM has it on their website so you need to get it from Cervini but this is very important to buy it. The Ram holes are so huge that debris and rain will just get sucked into them and spew all over the engine. There is no mesh that is provided and cervini does not make them either. You risk soaking the engine if your driving in torrential rain and high speeds. I would have to say it is MANDATORY to get the vent if you are buying this hood. Other than that it is MEAN!

    DanisiusT

    Year: 2017 Submodel: V6

    Helpful (7)

  • 2/5

    Installation Time: Full Day

    May 05, 2017

    Quality sucked

    Unfinished fiberglass found all underneath the hood. Took extensive body work to correct.

    Laeris

    Year: 2015 Submodel: GT

    Helpful (2)

  • 5/5

    Installation Time: Shop Install

    Installation Cost: $500-$1000

    June 28, 2016

    Cervini Hood

    Hood looks great really makes the car look different

    Indyjohn69

    Year: 2015 Submodel: V6

    Helpful (2)

  • 3/5

    Installation Time: Shop Install

    Installation Cost: $500-$1000

    July 07, 2017

    Cervini Ram Air Hood for '17 GT

    I bought this hood as a surprise birthday present for my husband and has nothing but problems with it. When I got it to the Ford paint shop, they had to charge me an extra 7hrs worth of work just to fix all the pin hole marks and imperfections. Not to mention one of the corners was messed up. Turned out great after the fact but bummed I had to go through so much to get it fixed. Expected a little more from such a popular name brand...

    CarrieanneD

    Year: 2017 Submodel: GT

    Helpful (1)

  • 5/5

    Installation Time: Less than 1 Hour

    July 04, 2017

    Great Looking Addition!

    Great hood! Fits perfectly and feeds a lot more air to the engine bay. Extremely satisfied. Had local body shop paint to match

    DavidW

    Year: 2016 Submodel: GT

    Helpful (1)

  • 5/5

    Installation Time: Afternoon

    May 10, 2017

    Cervini Hood

    Very awesome quality!!!! The packaging and shipping were top notch and it was very quick !

    SethM

    Year: 2016 Submodel: GT

    Helpful (1)

  • 5/5

    Installation Time: Less than 1 Hour

    November 24, 2016

    Great fit

    It aligns great and it's functional A Great Hood for the price

    RTRS550

    Year: 2015 Submodel: Ecoboost

    Helpful (1)

  • 5/5

    Installation Time: Shop Install

    Installation Cost: $100-$250

    November 10, 2016

    Awesome product.

    Adds an aggressive look to your mustang. Great quality. Took almost 2 weeks to arrive. The shop I had do the work had some trouble painting the heat extractors. The paint kept lifting. I would recommend leaving them matte black. Overall, I am very pleased customer. Thanks American Muscle.

    Bdub

    Year: 2016 Submodel: Ecoboost

    Helpful (1)

  • 4/5

    Installation Time: Afternoon

    October 17, 2016

    Only 4 stars for appearance

    I love this hood however, The hood I received I believe was unfinished.. It had small bumps on it and one of the inlet was patched with some time of putty. Seriously dissapointed that Cervinis would send out a product like that.

    Tyler

    Year: 2015 Submodel: GT

    Helpful (1)

  • 4/5

    September 07, 2016

    Great hood with only one minor complaint!

    This hood, for starters, looks amazing. Makes the car stand out and the aggressive look is incredible. I didn't install or paint but the body shop acted like it was pretty straight forward using Cervini's instructions. I rated this a 4/5 only because the ram air ducts up front are massive and don't come with any sort of mesh to keep debris out of the engine bay. Not saying this will be a major issue, but it does concern me a bit! Luckily my car is garage kept and Oklahoma doesn't get much snow. Water won't be a problem as everything is sealed up in the engine bay (as far as I know). Like I said above, this hoot looks amazing and definitely works to keep underhood temps down. Definitely recommend!

    Mace

    Year: 2016 Submodel: GT

    Helpful (1)

  • 5/5

    Installation Time: Shop Install

    June 29, 2016

    It's Only Money

    If you're looking to make an impression with your car then this is it. Wow! Was what I said when it arrived, and I could not stop smiling and laughing when I picked it up at the shop. It shipped quick, it shipped safely via freight, the instructions from Cervini's were followed to the letter at the body shop, and it turned out perfectly. I live in the American southeast and on a 90 degree day on the open road the intake temp drops down to 80 or lower now, and very quickly. Ram in and push out with the extraction vents. I can't wait for Cervini's to make their own hood struts. It even has Cervini pressed on the inside. Class act.

    SkySolider

    Year: 2015 Submodel: GT

    Helpful (1)

  • 4/5

    Installation Time: Shop Install

    Installation Cost: $250-$500

    April 03, 2016

    GREAT HOOD!

    I drive a 2015 Ecoboost, and knowing the turbo's love to get more unrestricted airflow, I changed my hood so my air intake from ROUSH could also get air flow from the top than instead just going through the intake slot through my top grill. So I had my local bodyshop guy install and paint the hood for me and after I did notice a significant incrase in my ecoboost performance!. but I didn't buy the hood just b/c of performance but more for looks. the bodylines match up and as far as my bodyguy telling me it was a easy direct fit replacement from your stock hood I would recommend getting this hood if you want to stand out more from the rest and try to give your s550 that more 13-14 Shelby look

    Samuel

    Year: 2015 Submodel: Ecoboost

    Helpful (1)

  • 5/5

    Installation Time: Shop Install

    Installation Cost: $100-$250

    July 13, 2017

    Perfect addtion

    This was a perfect fit and makes the front of my Mustang stand out from the rest.

    TerryR

    Year: 2017 Submodel: GT

    Helpful (0)

  • 5/5

    August 12, 2016

    Awesome Hood !!

    Overall I'm very pleased with the hood. The hardest part is just the alignment part, but just take your time on it. This took me a good 1 hour, be sure you have an extra hand or two, this will make the install easier. I would highly recommend this hood to any stang owner.

    Honeybadger

    Year: 2015 Submodel: Ecoboost

    Helpful (0)

  • 5/5

    Installation Time: Shop Install

    Installation Cost: $250-$500

    May 18, 2016

    Great product!

    Bought this hood for my 2016 5.0. Took it to a local shop to be painted/installed. Hood fits great, shop didn't have any trouble installing. Paint sticks well to it, deffinatly made my stang look a whole lot better. Shipping from AM was fast as usual. Overall very happy with the way this product turned out

    Jake

    Year: 2016 Submodel: GT

    Helpful (0)

Related Mustang Categories