Free Shipping On Orders Over $49. Details

Talk to a Mustang Enthusiast
1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $5,000 For Your Mustang! Enter Daily

American Muscle Graphics Black Rear Decklid Blackout Decal (99-04 All)

$0.00
Market Price $59.99 You Save 17% ($10.00)
Our Price

$49.99

FREE Shipping

  • Item 26168

Will this fit your Vehicle?

In Stock Ships same business day.
Ship to: Ashburn - 20149
Sorry, please enter a valid US or CA postal code
We're sorry, zip can't be updated at this time.
    Create a list
    Add to New List

    Saved - View your saved items

    We're sorry. We couldn't save this product at this time.

    Features, Video & Details

    • Classic Muscle Car Styling
    • Premium Cast Black Vinyl Material
    • Perfect Fit
    • Fits All 1999 to 2004 Mustangs

    Review & Installation Video

    Review & Install Video

    Hey everyone I’m Justin with AmericanMuscle.com and I’m taking a look at our AmericanMuscle graphics rear blackout deck lid panel for all 99-04 Mustangs, available in either gloss black or matte black like we have installed on our 2000 V6. We here at AmericanMuscle test fit and refine every one of our vinyl designs on our very own cars first, to ensure a perfect fit every time. This premium cast vinyl panel is meant to be a throwback to the classic styling of the 60s and 70s Mustangs, and is a nice alternative to the more expensive honeycomb deck lid panel. The vinyl should install in about an hour using the supplied squeegee, instructions and a little bit of patience. Now a little tip, the vinyl does ship rolled up, so it wouldn’t be a bad idea to take it out and let it sit on a flat surface for about 24 hours, just to make install a little easier. If you really want to set off the rear styling and complete the look, then you might want to pair up your rear deck lid panel with a blacked out third brake light, or even a blacked out rear lower valence. So if you want to evoke the retro styling of the classic Mustang, while keeping your budget in check, then you’ll definitely want to check out this AmericanMuscle graphics rear deck lid decal.

    Muscle Car Styling. Add aggressive retro styling to your New Edge Mustang with a Rear Decklid Blackout Panel Decal from AmericanMuscle. This Blackout Panel Decal will give your Pony's deck lid the same aggressive appearance as the classic Muscle Mustangs of the 60's and 70's.

    Perfect Fit Guaranteed. Our vinyl designs have been test fit, refined, and tested again on our very own fleet of vehicles to assure a perfect fit every time.

    Superior Quality Materials. Made from the highest quality Premium Cast Vinyl available on the market today - designed to last at least 8 years of harsh outdoor weather. They are far more durable than our competitors cheap, calendared vinyl film which starts to degrade in just a couple of years!

    Application. This high quality black vinyl Rear Decklid Blackout Panel Decal will fit all 1999 to 2004 Mustangs including the V6, GT, Bullitt, Mach 1 and SVT Cobra models.

    Fitment: 1999 2000 2001 2002 2003 2004 Details

    MPN# 26168

    CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

    What's in the Box
    • (1) Decklid Blackout
      Tools included:
    • (1) Squeege
    Installation Info
    Tech Specs
    Will it fit my Mustang?

      Customer Photos (65) Submit Your Photo

      View All 65 Photos

        Questions & Answers (4)

        4 Top Rated Questions

        How can I mount my license plate after applying this product?

        • The American Muscle Graphics Black Rear Decklid Blackout Decal has a cutout around where the license plate is mounted, allowing you to mount the license plate normally.

        Helpful (1)

        Will I be able to keep my badges? To install the decklid, I'll have to remove my Ford emblem from the right side. Will I be able to put it, plus another emblem on the left side back on after I install the decklid?

        • Yeah, you can still put it back on after removing it for the initial install. I'd recommend getting some good 3M double sided tape that isn't too thick so it'll fit flush. The Ford emblem does have little parts that clip into the car, but that's no big deal, just trip away the vinyl so they go back in the original holes.

        Helpful (1) Show 3 more answers

        Can this be used on a 2001 SVT cobra

        • This high quality black vinyl Rear Decklid Blackout Panel Decal will fit all 1999 to 2004 Mustangs including the V6, GT, Bullitt, Mach 1 and SVT Cobra models.

        Helpful (0) Show 1 more answer

        Can I wash my car normally with this on? Can I wash the car normally or can that not be wet?

        • You can wash all the vinyl you put on. Be sure to have let it dry after installation.

        Helpful (0) Show 1 more answer
        Post Your Question

          Customer Reviews (56) Write a Review

          Overall Rating 4.6

          out of 5 stars

          Installation Time:Less than 1 Hour

          • Fit 4.122449 4.1
          • Appearance 4.836735 4.8
          • Bang For Your Buck 4.32653 4.3



          • 4/5

            Installation Time: Afternoon

            June 26, 2019

            Nice looking

            Peels in the corners a bit but looks awesome. doesn't fit perfectly.

            ColtonB

            Year: 2004 Submodel: GT

            Helpful (0)

          • 3/5

            Installation Time: Less than 1 Hour

            March 22, 2019

            Should only be $20

            It's ok. Took 45min to put on. Instructions are pretty straight forward but were for installing the hood decal. American muscle should provide specific instructions. Outer pieces were too small and would show inner edges of decklid. Tried stretching it with same result. Not worth the $50. Better off spending the $120-130 on the honeycomb one. It looks way better installed in 20 min.

            Oxwhite04gt

            Year: 2004 Submodel: GT

            Helpful (0)

          • 5/5

            December 03, 2018

            Blackout rear decklid blackout

            Wonderful product. Easy to apply and looks great! It took about an hour to complete and enhanced the appearance of my silver mustang gt. I have received several positive comments on the appearance. I chose the gloss black and also blacked out other areas on the backend of my car. I definitely recommend this product. Not much money for a new look on a car.

            JillM

            Year: 2001 Submodel: GT

            Helpful (3)

          • 5/5

            Installation Time: Less than 1 Hour

            October 11, 2018

            Perfect

            These decals are easy to install, only annoying part is taking off the ford badge and the adhesive. These go well with the tinted tail light decals I got, as well as the rear bumper valance and mustang letter decals.

            DrivenPunk

            Year: 2000 Submodel: V6

            Helpful (3)

          • 5/5

            Installation Time: Less than 1 Hour

            August 27, 2018

            Looks awesome

            Only installed the insert area around the license plate with the matching lower decklid area and bottom bumper insert. Gives it a look that sets it apart from other stangs. Easy installation. Took me a couple times to get it lined up correctly but was easy to peel back off, spray with more soapy water solution and put back on.

            Katie

            Year: 2001 Submodel: GT

            Helpful (4)

          • 5/5

            Installation Time: Less than 1 Hour

            July 21, 2018

            Easy!

            Look at the videos, super easy to install, looks fantastic!

            DarylS

            Year: 2001 Submodel: V6

            Helpful (5)

          • 5/5

            Installation Time: Less than 1 Hour

            May 06, 2018

            Gloss Decklid Decal

            This blackout decal was mostly simple to apply, however, I had to use a hairdryer to warm up the vinyl to make it a bit more pliable. The fit is satisfactory, just be careful not to use too much heat or stretch it out too far. You might have to reapply some water/soap mixture to get it to the right position. I've been able to wash over it. It hasn't chipped or tried to peel for the three years it's been applied. I also applied the lower rear valance accent; same is true for it.

            GordonGB

            Year: 2003 Submodel: V6

            Helpful (5)

          • 5/5

            Installation Time: Less than 1 Hour

            December 07, 2017

            Gloss black decal

            Pretty good product wasn’t able to see some bubbles because I did it at night but install was easy with warmer water, and being able to line it up. The sticker fitment was good. Overall I’m satisfied.

            Lucas

            Year: 2003 Submodel: GT

            Helpful (6)

          • 4/5

            Installation Time: Less than 1 Hour

            November 18, 2017

            Good for a short term solution

            Quality of product was good, placement is good for fine tuning how you want it to look, durability and reliability are good after installation, overall I would suggest this product.

            JoshuaS

            Year: 2003 Submodel: GT

            Helpful (6)

          • 5/5

            Installation Time: Less than 1 Hour

            November 04, 2017

            Great fit

            This decal was well worth the money! Product fit great and didn't take long to install

            JoelG

            Year: 2001 Submodel: GT

            Helpful (7)

          • 4/5

            Installation Time: Less than 1 Hour

            October 31, 2017

            Good product and look

            Product looks great and is pretty simple to install.

            SamKozimor

            Year: 1999 Submodel: V6

            Helpful (5)

          • 5/5

            September 23, 2017

            Very nice product and easy to install

            The vinyl looks fantastic and only took about a half hour to install

            DallasF

            Year: 2003 Submodel: V6

            Helpful (6)

          • 3/5

            Installation Time: Afternoon

            September 16, 2017

            OK... but a little disappointed

            I like the look but I think AM can do better. The instructions are for installing a scope decal on the hood.. pretty basic rectangle...1 piece. The deck lid is three pieces. There is no specific UP indicators.. OK you can figure that out. But they could have provided some guidance on lining them up and getting the pieces to mate well. The most significant deficiency is that the decals were cut small in the horizontal direction. I had to trim parts of the small fillers to fill the gaps between the outside decals and the one behind the plate... and still ended up with hairline gaps (on a white car). AM: Fix the mfg templates to allow an overlap horizontally. You will need a razor blade to trim around the FORD badge oval if you want to keep that.. I did. I washed the car many times since installing these decals and they are holding up well.

            Coach

            Year: 1999 Submodel: V6

            Helpful (6)

          • 5/5

            Installation Time: Less than 1 Hour

            September 07, 2017

            Gloss on Gloss

            Cars Torch Red and its clean after every wash and with the deck lid installed I ordered gloss black so it'll blend in having the whole car looking fresh.

            YSady

            Year: 2002 Submodel: V6

            Helpful (6)

          • 5/5

            Installation Time: Less than 1 Hour

            July 11, 2017

            Decklid

            Very nice and easy to work with ! I would recommend this to any mustang owner!!

            BrandonS

            Year: 2002 Submodel: GT

            Helpful (5)

          • 5/5

            Installation Time: Less than 1 Hour

            July 11, 2017

            Black decklid

            Though I don't think this is is worth $50, it does make the car look a whole lot better! I can't stop staring at the back end of my mustang now!

            James

            Year: 2003 Submodel: GT

            Helpful (6)

          • 5/5

            Installation Time: Afternoon

            June 11, 2017

            Decklid blackout Detail

            very good item to make your car look nice and for a cheap price!

            Mike

            Year: 2002 Submodel: GT

            Helpful (5)

          • 5/5

            Installation Time: Less than 1 Hour

            June 07, 2017

            Awesome!

            I would highly recommend, easy installation, and drastically changes the look of the vehicle!

            JohnB

            Year: 2000 Submodel: V6

            Helpful (5)

          • 5/5

            Installation Time: Less than 1 Hour

            April 25, 2017

            Aggressive!

            I love it. It's not hard to install, you just need patience. And be aware that you have to remove whatever emblems you have on your deck lid before you install it. It makes my '99 cobra look great!!

            AbigailF

            Year: 1999 Submodel: Cobra

            Helpful (5)

          • 5/5

            Installation Time: Afternoon

            April 13, 2017

            35th Anniversary look at an amazing value.

            These decals went on way by following the directions and taking my time. They look amazing, and really changed the appearance for the hind side of my Stang.

            AllanN

            Year: 1999 Submodel: GT

            Helpful (6)