(approx) 15 Minutes
Simple installation for anyone.
- Customer Submitted:
- How to Install Wheel Spacers on Your 1994-2012 Mustang
$124.00 (pair)FREE Shipping
Features, Description, Reviews, Q&A, Specs & Installation
Please Note.Spacer lug nuts are included, requires the use of original lug nuts for wheel installation. Aftermarket Wheels are required to use Spacers.
Fitment: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
April 02, 2019
I ordered these for my 97 Mustang GT but they wouldn't fit with the factory 17" wheels. There is no relief in the rear of the wheel flanges for the studs to clear. Cutting the studs off is not recommended.Helpful (1)
December 26, 2018
These spacers really do the trick, they fill the rear wheel arches with the stock 17inch wheels. High Q product.Helpful (2)
December 21, 2018
2003 cobra terminator
I am very please with the spacers it make my cobra really aggressive lookHelpful (2)
October 04, 2018
Great quality; Won't work on stock wheels on 99-04
Higher quality than any of the billet stuff and that's why I bought these. Confident these will hold up to hard driving and autocross. Fit is great and rear end looks like it should have from the factory. When I bought these, they were supposed to be able to be plug-and-play with all wheels. However, I had to trim my studs about 3/8" each. Disappointed as I did not want to do that but I'm thrilled with how my car looks and the high quality that is expected from Eibach.Helpful (4)
September 03, 2018
Bought these for my 04 with stock wheels but they DO NOT FIT stock wheels. Very nice pieces but my wheels fit flush and it’s either cut the studs or not use them. I chose to return them where I had no issues with it. Description needs to be changed.Helpful (2)
August 03, 2018
the spacers are good quality when torqued properly had a hard time to take them off which then stripped the nut. buy different nuts for the spacersHelpful (4)
July 25, 2018
Has a great new look
These pushed the rear wheels out about 1" giving the staggered appearance while still being able to rotate the tires. Made a huge difference in the way the mustang looks.Helpful (3)
July 23, 2018
quality materials and great fitment on my 96 GT. rear wheels 18/10 with these 25mm spacers. they come out right to the edge of the well.Helpful (3)
July 06, 2018
At first, you will think it's a little too much but these spacers will give you that perfect flush fitment on your rear wheels. It was easy to install and comes with solid quality. My stock GT/CS wheels look perfect now after installing my lowering springs.Helpful (5)
June 21, 2018
I was worried that since my cobra was lowered, the tires would hit. I’m happy to report, no rubbing. These spacers work exactly as you would expect. They are high quality and fit perfectly. So happy with this purchase.Helpful (3)
Is it just me or in most of the customer photos people are running them upfront as well? On the Eibach website they sell "front pairs" and in other sites the don't list them as rear specific? But all the 25mm spacers on here say that they are rear specific.
These Eibach Pro-Spacer Hubcentric Wheel Spacers would physically fit on the front wheels as the center bore is the same on the front as the rear, however, we would highly recommend using these on the rear only. Using a large spacer on a hub assembly that helps turn the vehicle is extremely dangerous, and we would only recommend a 1/4" spacer (8mm) in the front.
Are these more strongly made/have superior quality than the Billet 1" Spacers?
Yes, I would say these are a little bit stronger quality of aluminum compared to the Billet 1".
Can I use these spacers for all 4 wheels or are they only for the rear wheels and why?
These spacers are only for use on the rear wheels as Mustangs are not designed to have wheel spacers on the front wheels. Reason for this is that these will be detrimental to the turning radius of the car which can be hazardous in certain conditions.
Will these work with stock wheels? I have heard that other wheel spacers do not work with stock wheels for some reason. I just wanted to know if these do.
these work great i have them on my 07 gt/cs
My drivers rear left wheel sticks out a lot more out of the wheel well significantly than the right one - what would causing this issue ??
It could be an issue with the spacer itself. Please contact us at 1 (888) 318-4347 and one of our representatives will be happy to assist you.
These spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs.
The 25mm Eibach Pro-Spacer Hubcentric Wheel Spacers will work with your stock and most aftermarket wheels for your 94'-14' Mustang.
The Eibach Pro-Spacer Hubcentric Wheel Spacers are a universal spacer offered by Eibach that will fit a number of vehicles. These can be used on a number of vehicles in the front, however we have found on these do not work properly on the front of the Mustangs due to the added stress on the wheel studs as well as a few other issues we have seen.
The Eibach Pro-Spacer Hubcentric Wheel Spacers will use the same torque of 100 Ft Lbs as your OEM wheels. These will include certification documents.
The 25mm Eibach Pro-Spacer Hubcentric Wheel Spacers are TUV, QS9000 and ISO9001 quality approved.
The Eibach Pro-Spacer Hubcentric Wheel Spacers should be torqued to your OEM lug nut torque spec of 100 Ft-Lbs, both for spacer to hub, and wheel to spacer studs.
The Eibach Pro-Spacer Hubcentric Wheel Spacers - 25mm will only be for the rear wheels and we would not have that size for the fronts.
These Eibach Pro-Spacer Hubcentric Wheel Spacers or any wheel spacer for that fact will leverage the weight on the hub and will put more strain on it.
That answer entirely depends on the backspacing/offset of the wheel in question. The best way to answer this question is to find out what either that backspacing or offset will be, and relative to how far these spacers push the wheels out from the hub, do a little measuring and math to properly and confidently ensure fitment.
The Eibach Pro-Spacer Hubcentric Wheel Spacers - 25mm and the Billet Aluminum Hubcentric Wheel Spacers - 1 in. are basically the same size. 25 millimeters once converted turns out to be 0.984252 of an inch. In this case it's how the spacers were manufactured as to explain the fitment differences.
(approx) 15 Minutes
Simple installation for anyone.
What's in the Box