$7,000 Summertime Mustang Build Enter Now!
Talk to a Mustang Expert
1-888-332-7930
Mon - Sun, 8:30 AM EST - 11:00 PM EST

Free Shipping On Orders Over $49. Details

Ford Performance 87MM GT350 Throttle Body (15-17 GT, GT350)

Market Price $183.32 You Save 13% ($23.91)
Our Price

$159.41

FREE Shipping
  • Item 390924
  • MPN# M-9926-M52

In Stock Ships same business day. Choose options to add to cart

Features & Details

  • Original Factory Equipment on the Shelby GT350
  • 87mm Single Bore Design
  • Genuine Ford Racing Part - M-9926-M52
  • Proudly Made in the USA
  • Fits 2015-2017 GT's with Additional Parts
  • Service Replacement for all 2015-2017 Shelby GT350 and GT350R
More Air for More Power. GT owners are always looking for ways to improve the power and performance of their Coyote Mustang. One way to improve both is by replacing the restrictive factory 80mm throttle body with a larger GT350 Throttle Body. Featuring a generous, free flowing 87mm single bore design, this genuine Ford Racing GT350 Throttle Body will increase air flow for an increase in power. This Throttle Body is the same exact one found as original factory equipment on all 2015-2017 Shelby GT350's.

Ford Racing Quality. When you're adding performance parts to your Pony, trust the folks who know it best to untap hidden potential and unleash the monster under your hood. Ford Racing proudly designs and manufactures their GT350 Throttle Body right here in the USA. Manufactured from lightweight aluminum, this Throttle Body comes fully assembled.

Installation on GT Mustangs. The Ford Racing 87MM GT350 Throttle Body is not a direct fit upgrade for the 2015-2017 GT Mustangs. However, you have two installation options to choose from to make it happen. Installation on a GT Mustang equipped with the stock Coyote TiVCT intake manifold will require the use of a 87mm Throttle Body Adapter for proper alignment. Your other choice is to install this GT350 Throttle Body with a matching Ford Racing GT350 5.2L Intake Manifold. Either choice will allow your Mustang to breathe easier for more power.

Application. This Ford Racing GT350 87mm Throttle Body is a direct fit service replacement for the 2015 to 2017 GT350 and GT350R Mustangs. This GT350 Throttle Body can also be installed on 2015 to 2017 GT Mustangs equipped with the 5.0L 4-Valve DOHC V8 engine as explained above.

Technical Note. This part has been designed and is intended for off-highway application only. Installation of this part on a vehicle that is driven on public roads may violate U.S. and Canadian laws and regulations relating to emission requirements and motor vehicle safety standards.

Fitment: 2015 2016 2017 Details

What's in the Box
  • (1) Throttle Body
Installation Info
Tech Specs
Will it fit my Mustang?
  • GT350 - 16, 15, 17

People Who Bought This Item Also Bought

Most Helpful Reviews

5/5
Great Throttel Body

I bought this Throttle Body. Along with the GT 350 Intake Manifold. Along with a Roush CAI, And a Bama Custom Tune The power gain is fantastic.

Helpful (1)

4/5
Worth it depending on goals in mind

the throttle body is a great way to bump up horsepower due to it's larger size and reliability due to it being a ford part. But, keep in mind the stock intake manifold will still taper back down to 83 ...

Read More
Helpful (1)

Overall Rating 3.5 out of 5 stars
Read All 13 Reviews

Customer Photos (5) Submit Your Photo

View All 5 Photos

You Might Also Like

13 Questions / 6 Answers

Ask a Question

Will this TB work with the 15-17 GT JLT cold air intake P/N: CAI-FMG15 ???

TP

  • The Ford Performance 87MM GT350 Throttle Body will work with that JLT Cold Air Intake Kit

    VincentV

Helpful (0)

Will this throttle body work on a 2012 GT with the Boss 302 manifold and Steeda 101mm CAI?

AdrianI

  • The Ford Performance 87MM GT350 Throttle Body will only fit 15-17 GTs or GT350s.

    VincentV

Helpful (0)

Will this product be compatible with the injen evolution cold air intake for the s550? If no is there an adapter I can purchase?

KevinG

  • The Ford Performance 87MM GT350 Throttle Body can be used with the Injen Evolution Cold Air Intake, however you may need to soak the throttle body coupler in warm to hot water to allow it to relax enough to install over the larger throttle body.

    Rob D

Helpful (0)

Does any one know if this throttle body will work with the Roush cold air intake made for the 2017 GT? I purchased the GT350 5.2 Voodoo Intake Manifold as well.

SamuelL

  • The Ford Performance 87MM GT350 Throttle Body will fit with the Roush Cold Air Intake.

    VincentV

Helpful (0)

Does this throttle body REQUIRE a tune or is it "encouraged"? You sell two other throttle bodies just a hair bigger and smaller than this one that do not. Just wanted to double check.

IKE32

  • For optimum performance, I would strongly encourage re-tuning your vehicle. While one for this throttle body is not specifically not that requires a tune, you will only benefit from having your cars computer codes re-written with installation of this piece.

    KevinD92

Helpful (0)

I have the AirRaid CAI and was wondering if this will still fit if I move to this throttle body and Intake?

Cisco50

  • This will work in conjunction with the Airaid cold air intake.

    KevinD92

Helpful (0)

More Products You Might Like

Customer Reviews (13) Write a Review

Overall Rating 3.5

out of 5 stars

Installation Time:Less than 1 Hour

  • Performance Gain 4.111111 4.1
  • Fit 4.444445 4.4



  • 4/5

    Installation Time: Less than 1 Hour

    January 07, 2017

    Worth it depending on goals in mind

    the throttle body is a great way to bump up horsepower due to it's larger size and reliability due to it being a ford part. But, keep in mind the stock intake manifold will still taper back down to 83 mm therefore yielding the gt350 throttle body useless. But, if you plan on purchasing the gt350 CAI then it is a great part to have since it was designed with that CAI in mind, but do not forget what i said above. For me, I purchased this and the blowfish adaptor(yes it will fit. just get the bf adaptor with the plate and solenoid relocation) then ported the stock intake manifold and adaptor with a dremel to 85 mm to take advantage of the larger throttle body opening. This alone yielded 10 hp with stock intake proven by dyno. Also, with this product you CANNOT purchase the jlt gt350 CAI as the jlt does not have an adaptor for the left cmcv hose. unless youre using cmcv lockouts or purchase a gt350 intake manifold along with this tb. Or you can dremel a hole in the right side cmcv hose and insert a 3 way hose that clips in the left cmcv hose like the gt350 intake manifold. I will upload a picture as that is what i did. Hope this helps

    Qwk5oh

    Year: 2015 Submodel: GT

    Helpful (1)

  • 5/5

    Installation Time: Less than 1 Hour

    November 16, 2016

    Great Throttel Body

    I bought this Throttle Body. Along with the GT 350 Intake Manifold. Along with a Roush CAI, And a Bama Custom Tune The power gain is fantastic.

    Halexandriah

    Year: 2016 Submodel: GT

    Helpful (1)

  • 1/5

    November 12, 2016

    Don't purchase it

    The casting for the 87MM GT350 Throttle Body is constructed in such a way that it cannot be installed on a 2015 GT with the stock manifold. Even with the Blowfish throttle body adapter the upper portion of the 87MM throttle body will not fit past the purge solenoid.

    Dejected

    Year: 2015 Submodel: GT

    Helpful (1)

  • 4/5

    August 31, 2016

    Works perfect

    You need both the throttle body adapter and evap purge valve adapter from Blowfish Racing to make it fit. The evap purge valve adapter moves the valve 45 degrees to the right so it is not in the way of the TB motor. It's a tight fit, but after a Bama tune, it works great. Certainly feel the torque. Can't wait to get a header next year to really take advantage of this TB.

    Fred

    Year: 2015 Submodel: GT

    Helpful (1)

  • 3/5

    July 16, 2016

    Good value

    Part is as described, however definitely needs a tune. Also, a very tight fit with some slight modifications using the blowfish adapter. I wasn't that impressed, but we'll see after I get it tuned.

    StreetGT

    Year: 2015 Submodel: GT

    Helpful (1)

  • 1/5

    July 13, 2016

    Does not fit.

    Purchased this and the blowfish adaptor together and does not fit on my 2016 GT Premium Automatic. Does not clear in two places and impossible to get the holes lined up. Will be returning. Side note: Thank you American Muscle for the awesome customer service and quick and painless returns!

    Burge

    Year: 2016 Submodel: GT

    Helpful (1)

  • 1/5

    Installation Time: Afternoon

    July 01, 2016

    Does not fit 2015-2016 GT with adapter

    It does not fit even with blowfish adapter. I contacted both American muscle and blowfish racing to see if there was something I was doing wrong. I provided them with photos and they both came back saying they were not sure if actually fit the 2015-2016 GT. They had designed the adapter for the 2011-2014 GT and assumed it would fit the same. It does not. Do not waste your time and money on this until they figure out a new adapter.

    Devildog0609

    Year: 2016 Submodel: GT

    Helpful (1)

  • 5/5

    Installation Time: Less than 1 Hour

    July 24, 2017

    S550bro

    Easy to install.. great mod !!! A must have for ur s550

    OscarG

    Year: 2016 Submodel: GT

    Helpful (0)

  • 3/5

    Installation Time: Less than 1 Hour

    July 11, 2017

    Not sure

    Throttle body is well made but so far is a tuning nightmare..Not saying anything bad about the product..just need more time with tuning and trying to figure out how to get it to work with 11-14 electronics

    Stephen

    Year: 1992 Submodel: LX

    Helpful (0)

  • 5/5

    Installation Time: Less than 1 Hour

    June 04, 2017

    Best bang for your buck.

    Installed this on my 2015 gt with the blowfish adapter and am completely satisfied. The fit and finish of the two products is seamless. Great value @ a fraction of the cost of aftermarket brands. With it being a factory part I would imagine it'll last the life of the vehicle. Installed with cai and bama tune and has great power increase and amazing deep throaty intake growl.

    WilliamK

    Year: 2015 Submodel: GT

    Helpful (0)

  • 4/5

    Installation Time: Less than 1 Hour

    April 01, 2017

    Great Product

    I got both GT350 throttle body and the blowfish adapter it is a tight fit it will bolt up to stock manifold and I use my Injen cold air intake sleeve fits over GT350 throttle body you will need a bigger hose clamp my 2015 GT Mustang Premium and it is a auto and tune by Bama it runs like a grape Ape now to install it was about one hour at a friend's shop still thinking about getting the GT350 Intake manifold down the road sometime in the near future Blowfish adapter will not fit a 11 to 14 GT Mustang So get a shop that knows what they are doing It will fits with COMMON SENSE if you don't have common sense it a shop to do it for you I will post a picture or two soon

    feardark69

    Year: 2015 Submodel: GT

    Helpful (0)

  • 5/5

    Installation Time: Less than 1 Hour

    March 02, 2017

    Worth doing

    Prior to installing the Throttle Body, the company that did my tune stated that I wouldn't gain any HP from adding it. However, after installing it and loading the new tune I noticed significantly increased throttle response. I haven't put it on the dyno yet, as I'm waiting to add the GT350 intake manifold. But, this TB is a big improvement over stock and well worth the money!

    Ali

    Year: 2016 Submodel: GT

    Helpful (0)

  • 4/5

    July 24, 2016

    Good power gain

    Really love how the gt350 intake manifold looks and the power it gave me in top of my hellion kit. Definitely a must buy if you want more flow through your engine

    16gt

    Year: 2016 Submodel: GT

    Helpful (0)

Related Mustang Categories