MBRP Angled Cut Dual Wall Exhaust Tip; 4-Inch; Carbon Fiber (Fits 3-Inch Tailpipe)

Video Review & Installation

The MBRP 4-inch Carbon Fiber Exhaust Tip with the 3-inch connection is a great choice for any Mustang owner who's looking to ditch their factory or in some cases aftermarket tips for a really stylish and wide carbon fiber option. I want to let you know this runs about 100 bucks for one and comes with new hardware for proper installation which, by the way, gets one out of three wrenches on our difficulty meter. Now this 4-inch tip from MBRP has a really attractive carbon fiber finish that is completely different than any factory exhaust tip or even any aftermarket exhaust tip that you'd find out in any category with a full cat-back or an axle-back exhaust.Now this tip will fit over any exhaust that accepts a 3-inch inlet. Because it is a universal tip, it may require modifications to your current exhaust outlet, if it doesn't fit a 3-inch inlet. This is a significantly wider than factory tip as well and looks a lot more aggressive with that carbon finish which adds a nice luxury touch to the appearance. Now there's also a 4-1/2 inch option available if you're looking to go a bit bigger and simply put, this is a very easy way to change that rear end appearance in a small but noticeable way for between 90 to 100 bucks. Installation shouldn't take longer than about 30 minutes or so from start to finish so I'm giving it that one out of three wrenches on our difficulty meter. Now remember, since it is universal, if modification is required, it could step the difficulty up to a soft two out of three wrenches. Either way, very, very, doable. It's a really easy way to just switch up that rear end appearance in a nice, unique fashion.If you want to pick up the 4-inch tip from MBRP in that carbon fiber finish, you can do so right here at americanmuscle.com.