Customer Reviews (100+) Write a Review

Overall Rating 4.5

out of 5 stars

Installation Time:Less than 1 Hour

Installation Cost:0-$100

• Handling Improvement 4.329787 4.3
• Fit 4.48421 4.5
• Bang For Your Buck 4.547369 4.5

• 4/5

  Installation Time: Afternoon

  May 18, 2018

  Review from SR Performance Rear Shock Tower Brace - Black (79-04 All)

  Have to work to get it to fit good

  Instructions are very lacking. You have to figure it out your self to make it fit.

  KennethE

  Year: 2000 Submodel: GT

  Helpful (0) Thanks for your input!

  • Handling Improvement 5

    5

  • Fit 4

    4

  • Bang for your Buck 4

    4
• 4/5

  Installation Time: Afternoon

  April 28, 2018

  Worth the money

  Easy install, I just measured and used a hole saw to make the hole and made a small cut from the bottom to slip over the brace.

  BryanR

  Year: 1988 Submodel: GT

  Helpful (1) Thanks for your input!

  • Handling Improvement 5

    5

  • Fit 5

    5

  • Bang for your Buck 5

    5
• 4/5

  Installation Time: Less than 1 Hour

  April 12, 2018

  Keeps it tight cornering

  For the most part, easy install. Had to use cordless impact to get the nut off the strut, which was unexpected. Took about 30 minutes to install in 88 Convertible. Not much body roll in the rear after this part was installed.

  88GTConvertible

  Year: 1988 Submodel: GT

  Helpful (1) Thanks for your input!

  • Handling Improvement 5

    5

  • Fit 5

    5

  • Bang for your Buck 5

    5
• 5/5

  Installation Time: Less than 1 Hour

  April 07, 2018

  Review from SR Performance Rear Shock Tower Brace - Black (79-04 All)

  Big improvement

  I bought these with the SR front brace and SR sway bars for my 2K GT convertible. The combination made a huge improvement in my car's handling...feels like a sports car should. ((Many claim the front and rear braces have little effect, but in my opinion any extra stiffness in the chassis is a good thing---especially when I was installing the bigger sway bars---it made sense to stiffen the entire rectangle)). Be careful cutting your trunk liner. I got a little carried away on one side before I realized it. Enjoy.

  Kim

  Year: 2000 Submodel: GT

  Helpful (1) Thanks for your input!

  • Handling Improvement 5

    5

  • Fit 5

    5

  • Bang for your Buck 5

    5
• 5/5

  Installation Time: Less than 1 Hour

  March 10, 2018

  Review from SR Performance Rear Shock Tower Brace - Black (79-04 All)

  REAR SHOCK TOWER BRACE

  GREAT PRODUCT, REALLY TIGHTEN UP THAT REAR END. EZ TO INSTALL AND LOOKS GO TOO.

  GregoryL

  Year: 2002 Submodel: GT

  Helpful (1) Thanks for your input!

  • Handling Improvement 5

    5

  • Fit 5

    5

  • Bang for your Buck 5

    5
• 5/5

  Installation Time: Less than 1 Hour

  February 19, 2018

  Review from SR Performance Rear Shock Tower Brace - Black (79-04 All)

  Shock tower brace

  This brace was a much needed addition to my 95 GT Convertible, I noticed the stiffness immediately fast delivery.

  GaiusF

  Year: 1995 Submodel: GT

  Helpful (1) Thanks for your input!

  • Handling Improvement 5

    5

  • Fit 5

    5

  • Bang for your Buck 5

    5
• 3/5

  Installation Time: Afternoon

  January 30, 2018

  Review from SR Performance Rear Shock Tower Brace - Black (79-04 All)

  OK Fitment

  If your looking to buy this and only bolt it in, this this prouct will work just fine for you. I wanted to weld mine in, and spent more time and effort making spacers to fill in the gaps in the sides, and grinding the paint down than worthwhile. If you want to weld one in it would be much easier to make your own. With it welded in now though, the product looks nice and adds a bit of rigidity to the rear end.

  Rosco

  Year: 1998 Submodel: Cobra

  Helpful (1) Thanks for your input!

  • Handling Improvement 2

    2

  • Fit 3

    3

  • Bang for your Buck 3

    3
• 2/5

  Installation Time: Less than 1 Hour

  January 04, 2018

  Review from SR Performance Rear Shock Tower Brace - Black (79-04 All)

  SR rear tower brace

  This item provides nice ridged feel to the car and would have got 5 stars but the interior must be cut for proper installation.

  SterlingE

  Year: 1990 Submodel: LX

  Helpful (1) Thanks for your input!

  • Handling Improvement 4

    4

  • Fit 1

    1

  • Bang for your Buck 2

    2
• 5/5

  Installation Time: Less than 1 Hour

  December 30, 2017

  it works

  car launches even better now and doesnt have that hard geipping tjat it used to have no i have traction every time

  CameronR

  Year: 1996 Submodel: GT

  Helpful (1) Thanks for your input!

  • Handling Improvement 5

    5

  • Fit 5

    5

  • Bang for your Buck 5

    5
• 5/5

  Installation Time: Less than 1 Hour

  December 22, 2017

  Review from SR Performance Rear Shock Tower Brace - Black (79-04 All)

  SR Performance Brace

  Install was easy, just take off top shock bushing and bolt. Place brace on shock tower lining up holes. Reinstall bushing and bolt. Some are saying to weld this in place, the only place that contacts shock tower is top. On my car, sides are a good 1/2 inch away from brace. So maybe if welding just bead the top ? Car is an 88 convertible. It has not had a hard life. However this brace did seem to tighten up the rear of the car a little. I added a new k member and k member brace before this and those tightened up the car more. For the money and ease of install this is a good deal.

  MikeM

  Year: 1988 Submodel: LX

  Helpful (1) Thanks for your input!

  • Handling Improvement 3

    3

  • Fit 5

    5

  • Bang for your Buck 5

    5
• 5/5

  Installation Time: Less than 1 Hour

  December 16, 2017

  Cobra performance

  Great quality, no flaws, easy to install, perfect fit, looks great.

  RobertS

  Year: 2003 Submodel: Cobra

  Helpful (1) Thanks for your input!

  • Handling Improvement 5

    5

  • Fit 5

    5

  • Bang for your Buck 5

    5
• 4/5

  Installation Time: Less than 1 Hour

  December 06, 2017

  Review from SR Performance Rear Shock Tower Brace - Black (79-04 All)

  Great product

  Installed both front and rear units work great easy install

  JohnV

  Year: 1999 Submodel: GT

  Helpful (1) Thanks for your input!

  • Handling Improvement 4

    4

  • Fit 5

    5

  • Bang for your Buck 4

    4
• 5/5

  Installation Time: Less than 1 Hour

  November 21, 2017

  Review from SR Performance Rear Shock Tower Brace - Black (79-04 All)

  Strut tower

  Fast shipping! I had to do a little bit of plastic trimming but other then that. Excellent fitment.

  GordonH

  Year: 1992 Submodel: GT

  Helpful (1) Thanks for your input!

  • Handling Improvement 2

    2

  • Fit 4

    4

  • Bang for your Buck 4

    4
• 4/5

  Installation Time: Afternoon

  November 08, 2017

  Review from SR Performance Rear Shock Tower Brace - Black (79-04 All)

  Good part

  Fit well, but had to remove my mach amps to make it fit

  Spike

  Year: 2003 Submodel: GT

  Helpful (1) Thanks for your input!

  • Handling Improvement 4

    4

  • Fit 4

    4

  • Bang for your Buck 5

    5
• 5/5

  Installation Time: Less than 1 Hour

  October 22, 2017

  Easy Install

  The Rear Shock Tower brace was a very easy install. It was a perfect fit, and it took longer to trim the molded carpet away from the shock towers, than it did to install the brace. It does appear that it is a bit more rigid in cornering. Looks great, good bang for the buck!

  RichardS

  Year: 2003 Submodel: GT

  Helpful (1) Thanks for your input!

  • Handling Improvement 3

    3

  • Fit 5

    5

  • Bang for your Buck 5

    5
• 5/5

  Installation Time: Afternoon

  October 12, 2017

  Review from SR Performance Rear Shock Tower Brace - Black (79-04 All)

  Affordable and high quality

  For the money this is a great rear brace and works to stiffen up the rear of the car. To be honest I can't tell much difference in handling, but it surely made the rear of the car feel stiffer in hard corners and seemed to get rid of some creaking noises.

  AllanN

  Year: 1999 Submodel: GT

  Helpful (2) Thanks for your input!

  • Handling Improvement 3

    3

  • Fit 5

    5

  • Bang for your Buck 5

    5
• 5/5

  Installation Time: Less than 1 Hour

  October 11, 2017

  Review from SR Performance Rear Shock Tower Brace - Black (79-04 All)

  Great Finish Easy to install

  Great Powder Coat finish. Takes less than 10 mins to install. Now the rear end feels more stable around the corner. Weld in will probably have a better result because bolt in the brace will still move if I push on it hard.

  CobraKid

  Year: 1999 Submodel: Cobra

  Helpful (1) Thanks for your input!

  • Handling Improvement 5

    5

  • Fit 5

    5

  • Bang for your Buck 5

    5
• 5/5

  September 30, 2017

  Review from SR Performance Rear Shock Tower Brace - Black (79-04 All)

  Rear strut bar

  Was fun to install definitely stiffens the back end around corners and looks great

  JoshuaM

  Year: 1987 Submodel: GT

  Helpful (1) Thanks for your input!

  • Handling Improvement 5

    5

  • Fit 5

    5

  • Bang for your Buck 5

    5
• 5/5

  Installation Time: Less than 1 Hour

  September 23, 2017

  Review from SR Performance Rear Shock Tower Brace - Black (79-04 All)

  spicy

  really easy install took less than 20 didnt break anything you just have to cut holes in the interior of the trunk but that was it

  Chase

  Year: 2001 Submodel: GT

  Helpful (1) Thanks for your input!

  • Handling Improvement 4

    4

  • Fit 4

    4

  • Bang for your Buck 5

    5
• 3/5

  Installation Time: Afternoon

  September 09, 2017

  Needs some modding...

  The bar seemed too short, so I had to elongate the holes so the bar would sit right on the shock tops. Then I had to grind off some of the rubber because I couldn't get the nylon lock nuts on.

  ThomasG

  Year: 2002 Submodel: GT

  Helpful (1) Thanks for your input!

  • Handling Improvement 3

    3

  • Fit 1

    1

  • Bang for your Buck 4

    4