Thermo Tec Cool-It Mat; 24-Inch x 50-Foot (Universal; Some Adaptation May Be Required)

Use the Cool-It Mat to battle excessive heat and noise that penetrate the driver compartment through the firewalls and floorboards. It is also perfect in doors, under hoods, and above transmission housings.

The Cool-It Mat is composed of resin-bonded silica blanketing insulation sandwiched between a Mylar facing on one side and a foil facing on the other. The highly-reflective Mylar reflects heat up to 2000 degrees Fahrenheit away from surfaces, while the foil side is orientated away from the heat source to conduct any penetrating heat across its surface thus providing the ultimate in heat protection.

The silica blanketing is a dual-density composite and is the main sound insulator. It is easy to trim and can be applied with the push-in fasteners provided or any weather strip adhesive. Available in three convenient sizes, including a 50 foot roll, Cool-It Mat is about 1/2 inch thick.
Details:

24 inch x 50 Foot
Easy to Trim
Silver
Reflects heat up to 2000 degrees F
Dual density composite
Can be applied with the push in fasteners Provided or any weather strip adhesive
1/2 Inch thick
Resin Bonded Silica
Battle excessive heat and noise

Prop 65 Warning:
CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov