Installation Time: Less than 1 Hour
March 22, 2013
Did a complete install of top, headliner, cables, bow pads, rear glass, & well liner and everything went together flawlessly. The only negative comment I have regarding this product is that there are no attachment holes on the clear vinyl connecting strip sewn on to hang on the plastic lugs that hold the rear tack strips to the body (compaired to the factory well liner). I just took an "exacto" knife (starting in the middle working my way towards the left and right) making 1" long slits roughly 5/8" below the top edge. There are no slots on the flap that folds over your rear crossmember for your rear seat belts, and if your planning on using the stock convertible top boot you will need to unstritch the plastic strip on the factory liner and use the original screws to attach to the cross member. This strip holds down the front of the boot or tonneau cover. I building a rear seat delete kit and adding the speedster covers so the last to modifications are not needed. Completely installed in less than 15 minutes and looks great when the top is up and the well liner is exposed.