Simple installation for anyone.
- How to Install AmericanMuscle Wheels on Your Mustang
- Customer Submitted:
- How to Install Wheels on Your 1979-2013 Mustang
$154.00 (each)FREE Shipping
Popular Tire Setups for this Wheel
Hey everyone Justin here with AmericanMuscle.com and I’m taking a look at a classic Mustang wheel design and by far our most popular wheel here at AmericanMuscle, I’m referring to these Bullitt wheels for all 99-04 Mustangs. Bullitt wheels have long been the favorite of many Mustang owners everywhere, from their classic 60s muscle car styling, in addition to the factory built Ford Bullitt Mustang in 01, then again in 08 and 09, it’s easy to see why these wheels are so popular on Mustangs of all ages. Our Bullitt wheels are available in 17” 18” and 19” diameters, and your choice of either gloss black, anthracite silver, matte black, or a chrome finish. The wheels are also available in either staggered or non staggered fitment, now a staggered fitment means that your rear wheels and tires are going to be slightly wider than your fronts, giving you that classic muscle car appearance, and that’s exactly what we’ve done on our 2000 V6 behind me. We have our gloss black 17x9’s on the front, and our gloss black 17x10 ½ ‘s on the rear, giving us that really aggressive stance. Now this will also help your traction as well, thanks to the fact that you get to run a big beefy tire out back to help you get that power down to the ground. The wheels are also available with a very cool deep dish option, now deep dish refers to the lip around the wheel itself, as you can see the face of the wheel is set further back into the rim, giving you that really nice lip that’s sure to get you noticed. If you want to check out what some of the other finishes might look like on your ride, then you’ll want to check out our 98 GT back there on the lift that’s sporting the chrome finish, or our 2000 GT back there on our dyno jet, sporting the anthracite silver look. Now whatever finish you decide to go with, rest assured that we have your back, with a 1 year warranty on our finishes, and a lifetime structural warranty on all wheels. Of course you can purchase these wheels individually if you like, however the smart move would be to take advantage of one of our pre built tire and wheel combinations. This pairs your new Bullitt wheels up with some of the top performing tires on the market today, in sizes that are guaranteed to fit your ride without rubbing, even if you’re lowered an inch or two. You also get to take advantage of our free mounting and balancing, optional nitrogen fill, and as always free shipping and handling. Installing a new set of wheels is something any backyard mechanic should be able to tackle, all you need to do is simply crack your lugs loose first, then jack up the car and swap the wheels, start to finish should take you about an hour using standard hand tools and a floor jack. So if you want to evoke that classic muscle car styling on your modern day ride, then these Bullitt wheels from AmericanMuscle will give you an aggressive look that’s sure to never go out of style.
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
Fitment: 1994 1995 1996 1997 1998
Mounting & Balancing: AmericanMuscle offers professional mounting and balancing on all wheels and tires when purchased together on the same order. This will allow you to swap out your old wheels for your new set when they arrive.
What is TPMS? The Tire Pressure Monitoring System (TPMS for short) is a factory installed safety feature on all 2007 and newer Ford Mustangs that alerts you when your tire pressure drops to an unsafe limit.
How do I keep my TPMS feature? Aftermarket wheels do not come with TPMS sensors. However, if you select 'Add TPMS Sensor Kit' and your specific year range from the options listed above, we'll install the TPMS Sensors in your new wheels!
American Muscle Wheels 28270
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
May 11, 2020
18X10 BULLITT BLACK
LOVE IT I HAVE 18X9 ON THE FRONT AND PUT 18X10 ON THE REAR WITH 275/40ZR18 MIGHT GO 305 SOONHelpful (0)
March 07, 2020
Nice finish Love the staggered look. Would definitely recommend going with the 10 or 10.5 in the back. Not only does it make the car look more muscular, but definitely helps with tractionHelpful (0)
March 05, 2020
Love the 10 inch on the back, it makes it look more aggressive.Helpful (0)
August 19, 2019
Excellent product and services from you all. The rim matched the ones on my Sport Trac exactly.Helpful (0)
April 11, 2019
Makes the car pop out more Nd looks agressive now I could pull up to car meets with a better lookHelpful (0)
April 04, 2019
2003 mustang Gt
Wheels looks and fits amazing on rear ! I mounted on a 275/40/18 tire and it makes my cars stance look great !Helpful (0)
March 13, 2019
Exactly what I was looking for. Couldn’t be happier with the look. Time will tell the story about longevity. Wheels went on with Steeda springs, New Spring Isolaters, SR Shocks and struts, Sr Caster/Camber plates. Look is great ride is great. Im a happy new AM customer!!Helpful (0)
March 10, 2019
Great look an price.
I got the 18x9 an 18x10 for my 2001 Bullitt an they look great on it. I got the BMR lower springs from AM also, with the 1inch lower springs an the Deep Dish Bullitt wheels the car looks incredible.Helpful (1)
January 01, 2019
I’ve always loved the look of them and they look great on my car I definitely recommend them.Helpful (4)
July 23, 2018
Exactly what I was looking for. I put 295x40x18s on and it looks amazing.Helpful (7)
Is this the size I need for a 285 wide tire?
When will these be back in stock
When will these be back instock
Can I use factory lug nuts, 17x8 bullits, with the 18x9 and 18x10 deep dish wheels?
The factory lug nuts can be used with these wheels yes.
What is the offset on this wheel?
The offset is +24mm.
While you may be able to squeeze a 335/30r18 tire on this 18x10 Bullit wheel, we would strongly recommend against doing so. A tire that large on a wheel pf that size will create a bit of a "Balloon" effect and can be extremely hard to maintain tire pressure especially in racing applications.
Yes a 305 tread width tire fits on a 10inch wide wheel.
The Deep Dish Bullitt Black Wheel in 18x9, Item 28264G94, would be the matching pair for the front, if you wanted to match the rear 18x10's. I will attach the link below for the matching 18x9 deep dish wheels: http://www.americanmuscle.com/verde-black-18x9-deep-dish-bullitt-wheel-set-94-04.html
The weight per wheel are as follows: The 18x9 will weigh 26.84 pounds. The 18x10 will weigh 8.77 pounds. These numbers are without the tires mounted.
Yes, you can run 18" wheels in the rear and 17" wheels in the front.
As long as it is not lowered more than 2", you should have no problem running a 305 wide tire. The only issue you may run into is having to flip or remove your rear quad shock. This is not a problem, removing your quad shock will have no affect on the car's ride or performance.
Sure can - you can drop your Mustang up to a 2" drop without any clearance or rubbing issues! Hope this helps!
If you opt for the Free Mounting and Balancing, they will arrive to your brother ready to be swapped onto the car! No need to take it to a shop for installation!
Simple installation for anyone.
What's in the Box
|Offset:||0.94 Inches, 24mm|
|Backspacing:||6.30 Inches, 160mm|