Installation Time: Less than 1 Hour
April 20, 2013
The fire is back in my Stang's eyes!
If you want to see AND be seen, this is the fog lamp replacement to go with. The smoked look is cool, I admit, but it also darkens the light coming out, so for a daily driver, it's not practical. I run with full lights during the day and night strictly for visibility. I drive almost 200 miles a day and find that far fewer people pull out in front of me when my lights are on during the day. I've put off replacing all my lights for over a year and wished I hadn't waited. Now, my ride shines out, day and night! The fit is perfect, too.
A note on installation: Use a magnetized tip Torx bit with an extension to get at the top two screws. It's a bugger finding the screw head by feel, but once you do, the magnetized tip will keep the screw on till you get it all the way out. Then when replacing them, the magnetized tip will hold on to the screw as you find the hole. This method saved me most of the time it otherwise would have taken to install these fog lamps.