Fabspeed Motorsport Valved Center Exit Conversion Exhaust System without Tips (23-26 Corvette C8 E-Ray, Stingray w/ Center Exit Conversion Bumper)

The Fabspeed Valved Center exit Conversion Cat-Back Exhaust System is the ULTIMATE exhaust solution for the C8 Stingray or E-Ray. It provides the same screaming sound that our Supersport X-Pipe exhaust has while also allowing the driver to quite the exhaust down using the factory exhaust loudness settings. It’s totally plug-and-play with the factory exhaust valve system. Retaining ALL drive modes, and Z-mode abilities.
Our design process started with 3D scanning the entire OEM exhaust system using our CREAFORM 700 Handscan so that we could make a complete Solidworks 3D model of the exhaust. We then designed the exhaust and fixtures using that model so that the exhaust fit perfectly to OEM standards. After multiple revisions for sound and dyno testing we decided to use our signature cast Titanium X-Pipe to tie the two cylinder banks together for exhaust scavenging and to defeat resonance. The valves are mounted to CNC’d plates that resist heat and keep the electronics working under extreme conditions. The piping is mandrel bent from Titanium, and we use ultra high temp heat wrapping to keep temps in the engine bay down.

SOUND:
This incredibly versatile exhaust is able to go from tame cruiser, to thoroughbred race car with the press of a button. With the car set to the loud exhaust mode (valves open), you’ll be treated to a much more authoritative rumble at idle, and our signature X-pipe bringing out the a high pitched wail that, dare we say, exceeds that of the Ferrari 458. With the Stingray or E-Ray set to quite mode (valves closed), it’s totally drone free and you can easily have a conversation in the cabin just like the OEM exhaust.

FEATURES:
Fits all Chevrolet Corvette C8 Stingray and E-Ray Models with Center Exit Conversion Bumper
Weight savings of -15 lbs / -6.2 kg vs the factory exhaust
Plug-and-play Helical UK valves that completely retain the factory exhaust valve functionality
NPP Extenders included for simplified installation
Incorporates our signature cast X-pipe for superior flow and exhaust scavenging
Larger diameter tubing allows the Z06 engine to really breathe
Constructed from high-quality T304L CNC mandrel-bent Stainless Steel for optimum flow and maximum durability
Laser scanned and CAD designed for perfect OEM fitment using an Ametek Handyscan 700
No Check Engine Light guaranteed
Requires Titanium or Carbon Fiber tip options, sold separately
This cat-back exhaust is 100% emissions legal worldwide
Simple DIY bolt-on installation, no cutting or welding required
All hardware included
100% built in house and DYNO developed at Fabspeed Motorsport USA
All Fabspeed performance products are backed by the Fabspeed Lifetime Warranty

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov