Simple installation for anyone.
- How to Install AmericanMuscle Wheels on Your Mustang
- Customer Submitted:
- How to Install Wheels on Your 1979-2013 Mustang
$249.99 (each)FREE Shipping
Popular Tire Setups for this Wheel
Hey Justin here with AmericanMuscle.com, and I’m checking out Forgestar’s F15 monoblock wheels, available in your choice of either matte black, gun metal, piano black, and silver, fitting all 2005 and newer Mustangs. At first glance you can see the design of the F14 Is more of a multispoke mesh wheel design, which has become extremely popular with the Mustang crowd as of late, which is course due to cars such as the RTR and the 2013 GT 500, both of which sport a variation of the mesh wheel design. These monoblock or one piece aluminum wheels go through an advanced process during production called rotary forging, this greatly improves the strength of the wheel, specifically the barrel, and generally reduces the weight of the wheel itself. The F14’s are offered in a wide variety of sizing options including an 18, 19, and 20 inch diameter, and in 9, 10, and 11 inch widths. Because there are a few different width options available, you can easily achieve that classic staggered look, by sticking a wider rear wheel and tire in the back versus the front, which in my opinion is the only way to roll. Chances are if you’re buying new wheels, you’re going to need new tires, we offer a pre built combinations, where we pair your F14’s up with some of the top tires on the market today, in sizes that are guaranteed to fit your car without rubbing, even if you’re lowered an inch or two. Of course you can also take advantage of our free mounting and balancing, free shipping and handling. Finally, all Forgestar wheels are backed by a lifetime structural warranty. When it does come time to install your new wheels just grab a floor jack and some basic hand tools. You’ll want to crack the lugs loose first on the stock wheels before getting the car in the air, after you do that, jack the car up and swap the 4 wheels and tires. Doesn’t get a lot easier than this, but since there is a little work involved, we’ll call it an hour from start to finish. So if you’re looking to take a break from the standard 5 spoke wheel and you want to go with a more modern multispoke mesh wheel design, then be sure to check out these quality lightweight aluminum wheels from Forgestar available right here at AmericanMuscle.com
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
Recommended Tire Size:
Note: Priced per wheel.
Note: Requires either tuner lug nuts or 6-spline style lug nuts
Note: The stock lug nuts (13/16”) prove to be too large when used in conjunction with these wheels. Please take a look at the Lug Nut Ordering Options above for some compatible options.
Fitment: 2005 2006 2007 2008 2009
Mounting & Balancing: AmericanMuscle offers professional mounting and balancing on all wheels and tires when purchased together on the same order. This will allow you to swap out your old wheels for your new set when they arrive.
What is TPMS? The Tire Pressure Monitoring System (TPMS for short) is a factory installed safety feature on all 2007 and newer Ford Mustangs that alerts you when your tire pressure drops to an unsafe limit.
How do I keep my TPMS feature? Aftermarket wheels do not come with TPMS sensors. However, if you select 'Add TPMS Sensor Kit' and your specific year range from the options listed above, we'll install the TPMS Sensors in your new wheels!
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
December 09, 2016
Great looking wheels
These Forgestar F14 gunmetal wheels look great on my GT! The staggered affect creates a very aggressive look.Helpful (11)
April 22, 2016
Amazing Wheel Tire Kit
If you're looking for a good quality wheel, this is it! Purchased about two months ago, and they shine like new. Picked the Mickey Thompson tires, and I couldn't be happier. I had this kit swapped out with my stock set within an hour with basic hand tools in my driveway. Way to go American Muscle!Helpful (11)
April 01, 2016
Beware of Bolt Pattern Errors! Heavy Wheels
I was pretty disappointed to find that these wheels were extremely heavy. Over 60 lbs per wheel/tire (~20 lbs heavier than stock). Also, when I bolted up the first rear wheel, it felt like the bolt pattern was slightly off. When tried to install the second rear, the bolt pattern was WAY off, It was for a much larger diameter bolt circle. I decided to send the whole set back. Not really the fault of American Muscle, but I think Forgestar has some quality control issues. Also, these wheels are only partially forged. The spokes and hub are cast as evidenced by the sand casting marks on the back of the hub. Also the spokes are extremely thick with no pocketing in the back. I'll attempt to upload a picture of the bolt pattern error.Helpful (11)
May 24, 2015
First of all I'd like to say, I am a regular American Muscle Customer...and I'd like to say that this wheel purchase has been one of my favorite purchases. The wheel specs that American Muscle and Forgestar put together are "Second to none" as far as fitment, finish and quality.Helpful (10)
August 13, 2014
Love these Wheels
I just installed these on my 2014 Mustang GT. The Gunmetal is a perfect fit with my Ingot Silver car. It's just dark enough for contrast but not too dark. These wheels just look like they were meant to be mounted on a Mustang.Helpful (11)
May 27, 2014
Great bang for the buck if you want a quality lightweight wheel, much better than most of the offering out there for our cars. Good pricing too!Helpful (9)
January 25, 2014
Looks great on my boss 302
Everything went smooth from the time I ordered to the installation. The fit and finish are perfect and the quality is excellent. I would highly recommend these wheels for any grabber blue mustang.Helpful (10)
July 25, 2013
The quality of the forgestar wheels is top notch.The gunmetal color looks great on my satin silver convertible.Helpful (11)
June 08, 2013
Great wheels to make your car look Great!
The quality of these Forgestar Wheels is superb. The gunmetal is perfect not to dark not to light. I am impressed with the quality of these wheels. The Sumitomo tires are great as well, they provide excellent grip on take offs and great traction on the road even on the rain. The staggered look is a must for these Mustangs, they fit like a glove on these cars. Very happy with these wheels, worth the money, highly recomended.Helpful (11)
May 17, 2013
Forge star f14 rims
The forgestar f14 rims are a great quality product and the finish is amazing. I get complements constantly on how good they look and how great the finish is and how they make my stang stand out in a crowd. The forge star f-14 gunmetal rims are worth every penny and i could not be more excited about my purchace.They show off my mustang and well worth it. I would recommend this product to all mustang owners who want to show off there musle car.Helpful (10)
Hello. Looking to buy the forgstar f14 19x9/10 staggered wheels. Will they clear/fit the brembo m2300s brake kit I have?
The 19x9/10 Staggered Forgestar F14 Wheel & Pirelli Tire Kit will clear factory and most aftermarket equipped Big Brake Kits.
Will they rub if I'm lowered 1.5" all around?
No - you can install this wheel and tire package and drop your Mustang up to 2" without any rubbing or clearance issues. Hope this helps!
How much do these wheels weigh?
Gotcha covered! See link: http://www.bimmerboost.com/showthread.php?7867-Wheel-weight-comparison-Weights-of-various-popular-18-20-inch-rims Looks like an estimate of 24 lbs. for the 9" and 25 lbs. for the 10" per this guy's scale.
Simple installation for anyone.
What's in the Box
|Offset:||1.65 Inches, 42mm|
|Backspacing:||7.10 Inches, 181mm|