(approx) 1 Hour
Simple installation for anyone.
Features, Description, Reviews, Q&A, Specs & Installation
Fitment: 2010 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
December 31, 2019
JLT Series 3
This is a very nice product! Easy to install, clean looking and very well built. Installation took no more than 30 minutes. I'm a big fan of JTL products.Helpful (0)
July 03, 2019
Bought trying to find the cheapest CAI found out AFTER install a $400 tuner is required for this.... Save yourself some $ and buy another product that doesn't require a tuner. Spent an entire day trying to get the Check Engine light off my dash only to call customer service and find out it needed a tuner. I for sure try to read descriptions, try to make sure I pay attention to what I am ordering, but when a product NEEDS a $400 tuner there REALLY needs to be a photo that states it in the photos, and like when you buy tires or other items that REQUIRE certain sensors etc a "yes, or no" option, this would have saved me $400! OUCH, especially when this was bought so that I could save a little gas mileage and just to give my car a nice purr... NOT worth the $$$Helpful (0)
June 14, 2019
Awesome time installing! It was a breeze! Love the performance it gives, along with the sound it emits. Couldn’t be happier! Thanks American Muscle, and thanks JLT for making great, reliable products!Helpful (0)
May 27, 2019
Well I haven’t tuned up my ride yet but the install was easy and fits perfect. Adds a great look under the hood and I’ve heard some good things such as way better air flow and throttle response from people.Helpful (0)
March 27, 2019
Really can feel the gains. Plus it gives my car a deeper tone. You can tell the difference from the stock to the series 3. Make sure you have a tune supporting it before you install. I made that mistake. It will run lean quick. But it do sound like its crammed lol.Helpful (0)
February 22, 2019
Fits perfectly sounds good and you get gains! But make sure you get a tuner and tune with 93 ;) Cars louder and has a net set of lungs! Love it Took me a while cuz it was my 1st timeHelpful (1)
January 30, 2019
Makes exhaust a bit louder Gained some horsepower, not much.Helpful (1)
December 30, 2018
Quick and easy install with good fitment. Everything lines up as it should and fits with stock or ford racing intake manifold. Instructions provided are clear with pictures. Only modification is remounting powerteeeing resivour from engine to factory Shelby location on the fan shroudHelpful (2)
September 01, 2018
Awesome 1st Mod
Added a distinct look under the hood. Along with the SR Throttle body and spacer, and the Bama tune, really wakes up the motor. Instant throttle response, pulls hard from about 3500 all the way to redline! Previous installed was a single piece aluminum driveshaft. Can’t wait to get the FRPP Intake and Hot Rod cams!!Helpful (5)
August 03, 2018
Made a noticeable performance difference when accelerating.Helpful (2)
is the tune Mandatory? its not possible to just put it on and later on get the tune?
Tuning is required when installing this JLT Performance Series 3 Cold Air Intake, due to the engine needing the proper air ratio to function. Otherwise the car may shut off or not even turn over.
Is this legal for California residents
This cold air intake is not CARB legal and would not legal for sale in California.
what tuner would work for this?
Any tuners we offer with custom tunes will work with the JLT Performance Series 3 Cold Air Intake.
if i have the t1000 diablo sport will that work with the cold air intake or do i need another tune
Custom tunes are required for the install of this cold air intake. If you have a custom tuner writing your tunes, and you are utilizing that device to hold the tunes, then you'll be good to go. Otherwise, if you're speaking of the preloaded tunes, it will not work.
Do you guys sell replacement filters for this intake?
Unfortunately we do not currently sell replacement filters for the JLT intakes. We recommend contacting the manufacturer.
Though our testing the JLT Performance Series 3 Cold Air Intake would give you around 15-20 Horsepower.
The JLT Performance Series 3 Cold Air Intake will require a custom tune in order to be used. this cannot be created on a handheld tuner, and must be made by a qualified tuner using Diablosport's software for tuning with the Predator tuner.
No, The mass air flow sensor will not need to be upgraded when using the JLT Performance Series 3 Cold Air Intake for the 2010 GT. You will be required to tune your Mustang after you install this intake.
(approx) 1 Hour
Simple installation for anyone.
What's in the Box
|Year/Model:||2010 GT||Filter Placement:||Engine Bay|
|Manufacture:||JLT||Computer Tune Required:||Yes|