- (1) Wheel
- (1) Center Cap
- Hardware included:
- None Required
$101.99 (each)FREE Shipping
Add FREE Mounting and Balancing?
Add TPMS Sensor (Recommended for 2007+)
Add TPMS Tool (Required to Sync TPMS Sensors)
Notify me when it's back in stock.
Hey everyone I’m Justin with AmericanMuscle.com and I’m taking a look at the classic mustang wheel design and by far our most popular wheel here at AmericanMuscle, Im referring to these Bullitt wheels for all 2005 and up model mustangs in either chrome, matte black, anthracite silver or gloss black. Bullitt wheels have long been the favorite of many Mustang owners out there, from the classic 60s roots to the factory built for Bullitt mustangs in 2001 and then again in 08 and 09, it's easy to see why these wheels look so good on Mustangs of all ages. Wheels are available in 17, 18, 19, and 20 inch diameters and are offered in both staggered and non-staggered fitments. They are also offered with a very cool deep dish option that refers to the lip around the wheel itself, as you can see the face of the wheel is set further back into the rim resulting in a nice thick lip which looks very tough. As I mentioned before these wheels are available in both staggered and non-staggered fitments. Now, staggered fitment means your rear wheels and tires are going to be wider than your fronts, that’s exactly what we’ve done with our 06 GT here, we have the 9s up front with the 10s our back resulting in that classic muscle car stance. Now this is also better for your traction and handling as well thanks to the fact that you are able to run a wider rear tire so you can help get that power down to the ground. If you’re not a fan of staggered fitment then you might want to check out our non-staggered or standard fitment like we have installed on our 07 GT back there on the lift, we have the matte black standard 17x9s on all four corners and as you can see it looks really sharp. Or say you really want to change up the look of your ride and you live and die by the saying bigger is always better, well if that sounds like you then you will definitely want to check out our 20x8 1/2s on our 2011 GT back there on our dyno jet whichever finish you end up going with you can rest assure that every wheel is covered by our 1 year finish warranty and a lifetime structural guarantee. You can get these wheels by themselves or in one of our pre-built tire and wheel combos which pair your new Bullitt wheels up with some of better performing tires on the market today in sizes that are guaranteed to fit without rubbing even if you are lowered an inch or two, you also get to take advantage of our free mounting and balancing, optional nitro fill and free shipping and handling. Of course with you 2007 and up guys you’ll want to remember your TPMS sensor when ordering your new wheels. You don’t want your new wheels to be held on by some rusty looking lug nuts, this will be a great time to ditch those eyesores and get a new lug nut to better fit your new Bullitt wheels and of course you want to pick up some wheel locks to protect your investment. Installing a new set of wheels and tires is something any backyard mechanic should be able to tackle, all you need to do is simply crack your lug nuts loose first while the car is still on the ground then jack your car up and switch the wheels, it’s just that easy. Using a basic floor jack and hand tools that should take you no more than an hour, so if you are looking to evoke that classic muscle car styling on your modern ride, these Bullitt wheels from AmericanMuscle will give you an aggressive look that is sure never to go out of style.
Note: Priced per wheel.
Fitment: 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 Details
Mounting & Balancing: AmericanMuscle offers professional mounting and balancing on all wheels and tires when purchased together on the same order for an additional fee. This will allow you to swap out your old wheels for your new set when they arrive. We even offer Free Nitrogen tire fill.
What is TPMS? The Tire Pressure Monitoring System (TPMS for short) is a factory installed safety feature on all 2007 and newer Ford Mustangs that alerts you when your tire pressure drops to an unsafe limit.
How do I keep my TPMS feature? Aftermarket wheels do not come with TPMS sensors. However, if you select 'Add TPMS Sensor Kit' and your specific year range from the options listed above, we'll install the TPMS Sensors in your new wheels free of charge!
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Difficulty Level:Simple installation for anyone
|Placement:||Front or Rear||Centercap Size:||Large (2-1/2")|
|Back Spacing:||5.94" (151mm)||Offset:||+30mm (1.18")|
|Bolt Pattern:||5x4.5" (5x114.3mm)||Weight:||22.0 lbs|
|Material:||Aluminum||Lip Size :||N/A|
|Best Tire :||255/50-17||Year/Model:||05-14 V6, 05-10 GT and Bullitt, Excludes 2007-2014 GT500 & 2011+ GT|
Does not fit 2011-2014 GT, BOSS 302, Shelby GT500, or Mustangs with an upgraded a Big Brake Kit
Hi what's the actual bolt pattern? Will this also fit my 66 Mustang GT at 5x4.5?
This will have a 5x4.5" bolt pattern. We cannot confirm fitment for your 66 GT at this point in time as we have only confirmed fitment with 05-10 GT's, 08-09 Bullitt's, and 05-15 V6 Models.
Will my stock center caps fit these wheel
Oem Ford center caps will not fit the Bullitt Matte Black Wheel.
Can I use the stock tires on 17X9 or do they need to be replaced as well?
More than likely the stock tires will have to be replaced as the stock tire wheel size is a 17x8 and a 235/55-17 is the size of the tire. I would recommend purchasing either a 255/40-17 or a 275/40-17 with use of the 17x9 wheels.
is it possible to get this style in a staggered 17x9 and 17x10 setup without purchasing them in a wheel/tire kit?
Unfortunately, we do not have the 17x10 wheels separately. We only offer these wheels in 17x8 and 17x9.
Will this rim and tire combo rub when turning ? I would like to know whether or not the tires will rub if I'm turning at full lock?. I have a stock suspension with stock ride height.
This will not rub on a stock suspension.
Installation Time:Full Day
Installation Time: Afternoon
April 17, 2018
lot of MEAT
Sweet!! just one problem no lug nuts, you would think buying tires and rims together they would come with lug nuts
Bang for your Buck 3
Installation Time: Shop Install
Installation Cost: 0-$100
December 27, 2017
they look great easy to install, I just wish that they where 17 x 10 in. instead of 9
Bang for your Buck 5
August 04, 2016
I bought the Bullet Matt black wheels for my 2013 Mustang V6 convertible which is also black with 255-50-17 tires looks great arrived as said in four days very impressed with the looks and fit.
Installation Time: Less than 1 Hour
September 09, 2014
Review from Bullitt Matte Black Wheel & NITTO Tire Kit - 17x9 (05-14 V6; 05-10 GT)
Gives the V6 mustang a mean look... like it should.
Bang for your Buck 5