(approx) 1 Hour
Light to Moderate mechanical skill required.
Features, Description, Reviews, Q&A, Specs & Installation
Technical Note: Americanmuscle recommends adding the 2005+ Mustang 304 Stainless Steel Exhaust Hanger Kit from the drop down option above, to provide more strength, stability and a cleaner installed appearance. If you have a 2007 Mustang you may need the kit for correct installation.
Fitment: 2005 2006 2007 2008 2009 2010 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
June 26, 2019
They work, sort of...
So I have pros and cons to this. I will try to be as impartial as possible. Pros are that they sound pretty good and really gives the car some rumble. The cons are that the passenger side hangers prevent a level fit. In order to make them fit correctly you have to either bend or cut and weld the hangers to make them evenly level. Fair warning, if you bend, cut, or even scratch them, you can't return or exchange them. Just plan on having to do a little custom work to make these look correct, but I get compliments on the sound of my car literally everywhere I go.Helpful (0)
May 04, 2019
Sounds great, but...
Sounds great, but I had to cut notches to fit around the stock exhaust portion and one of the passenger side exhaust hangers isn't correct so you either have to cut and re-weld it or let it hang by one hanger.Helpful (0)
March 26, 2019
Pypes muffler delete axle backs
sounds great !!! easy install took about 45 minutes. Amazing look and sound recommend if looking for that aggressive sound for your 3v mustang .Helpful (0)
December 30, 2018
Great sound, very easy install
Wasnt sure whether or no to choose this or the pype bombs but after reading a million reviews and you tube videos I decided on the muffler delete. Removal of my old exhaust was extremely easy as my car was just purchased from the south and has never seen salt or snow. A little kroil and everything loosened right up. Had a little trouble lining up passenger side as everyone else said but a little very simple readjustment and you can put them wherever you want. I love the way the black looks on my yellow and black stang and was even happier when I started her up. Sounds excellent from a cold start, a lot nicer sound than the noise I expected it to make. Even after it warms it is quiet enough to drive but when you let her eat you'll be smiling ear to ear,especially if you drive under an underpass or in a tight spot. Overall I'm very happy with this mod but I always want more which had me ordering the x pipe the very next day. Also adding air raid and bama tuner,possibly long tube headers. Will update after x pipe install.Helpful (1)
November 19, 2018
Love the sound
Love the sound of the Pypes!!!!! Install was easy except for the passenger side. Had a shop install and they had to modify the hanger. Easy fix for him.Helpful (1)
September 23, 2018
07 GT Convertible
Passenger side does hang low just like the reviews say. I knew this when I bought them. Not a deal breaker, just a few adjustments and all is fine. These sound great! They sing a little when you give it gas but are quite when driving normal. I put these on by myself with no problems. I left the cats on and these are perfect. You need these! I get compliments on the sound.Helpful (2)
September 11, 2018
2006 Mustang GT
Every since I got these pipe installed on my car. It has been turning heads everywhere I go. I can feel the extra power I have gained as well.Helpful (2)
August 15, 2018
Had troubles with the clamps holding pipe together and had to put shims in to make connections fit. Other then that little hard to work in place but love how it turned outHelpful (2)
July 29, 2018
I lik my Pypes pipes.
Easy to install, however I ran into the same others have mentioned with the passenger side hanging lower than the driver side. Haven’t figured out how to adjust it. Hoping to avoid having to take it to someone. Thought the pipes would have a little deeper sound, but overall, I’m very pleased.Helpful (2)
July 11, 2018
JUST AWESOME !!!!
Neighbor’s can hear ya coming down the street. You can still carry conversations while driving. Very easy install. The instruction sheet tells how to fix the passenger side from hanging low.Helpful (4)
Hi, so I saw that the rear tips can be taken off. Can this setup be used with the roush rear valence? (square tip exhaust) Simply remove the tips that come with the exhaust, install normally and replace the tips with the square ones?
Unfortunately, the Roush exhaust tips were designed to be a direct fit with the Roush axle-back exhaust and may not be a bolt on install with this exhaust.
Will this fit on the pypes off-road X pipe?
ThePypes Muffler-Delete Axle-Back Exhaust is designed to connect to the piping between your mid-pipe and current mufflers. This will not fit directly up to the x-pipe.
Will this fit my 2012 V6 Mustang? I.T doesn’t have to be a perfect match up but I want i.t to be close.
The pypes muffler delete axle-back exhaust is designed to fit 2005-2010 GT and GT500 models only. Unfortunately it will not fit a 2012 Mustang V6.
Will these pass emissions/smog check in California
This Pypes Muffler-Delete Axle-Back Exhaust will not affect any emissions devices on your Mustang, so this would pass a smog inspection in California.
Will this work with a v6 conversion kit if I have custom hanger set
The Pypes Muffler-Delete Axle-Back Exhaust will not work on the V6 models unless you have the dual conversion set up already.
At this time we do not offer individual sides of the Pypes Muffler-Delete Axle-Back Exhaust. We would recommend contacting Pypes directly for this.
The Pypes Muffler-Delete Axle-Back Exhaust will be raspier than the SLP loudmouths yes.
(approx) 1 Hour
Light to Moderate mechanical skill required.
What's in the Box
|Piping Material:||Black 304 Stainless Steel||Tip Material :||Black 304 Stainless Steel|
|Piping Size:||2.5"||Tip Size:||4"|
|Muffler Type:||None - Muffler Delete||Fitment:||2005-2010 GT, Bullitt & GT500|