- (1) Wheel
- (1) Center Cap
- Hardware included:
- None Required
Local Install Shops
Quoted installation from $125View 3 Shops
near 19355 (change)
AmericanMuscle no longer carries the Shelby CS40 Silver Machined Wheel - 20x10 (05-14 All). Please check out Silver Machined Shelby CS40 Wheels (2005-2009) for an updated selection.
Note: Priced per wheel.
Mounting & Balancing: AmericanMuscle offers professional mounting and balancing on all wheels and tires when purchased together on the same order for an additional fee. This will allow you to swap out your old wheels for your new set when they arrive. We even offer Free Nitrogen tire fill.
What is TPMS? The Tire Pressure Monitoring System (TPMS for short) is a factory installed safety feature on all 2007 and newer Ford Mustangs that alerts you when your tire pressure drops to an unsafe limit.
How do I keep my TPMS feature? Aftermarket wheels do not come with TPMS sensors. However, if you select 'Add TPMS Sensor Kit' and your specific year range from the options listed above, we'll install the TPMS Sensors in your new wheels free of charge!
Difficulty Level:Simple installation for anyone
|Manufacturer:||Carroll Shelby Wheels||Style:||CS40|
|Size:||20x10||Finish:||Machined with silver accents|
|Placement:||Rear Only||Centercap Size:||Included|
|Back Spacing:||7.3" (185mm)||Offset:||+45mm (1.8")|
|Bolt Pattern:||5x4.5" (5x114.3mm)||Weight:||28.9 lbs|
|Material:||Aluminum||Lip Size :|
|Best Tire :||285/30-20||Year/Model:||2005-2014 V6, GT, Bullitt, Shelby GT500|
How wide is the 285 tire ? Can I fit a 315 or a 305 on the rear w/ this 10 " wheel on the rear ?
Thank you for your question about the Staggered Shelby CS40 Silver Machined Wheel & NITTO INVO Tire Kit - 20x9/10 (05-14). The width of the 285 tire at it's thickest is about 11.2 inches, with about 10.5 inches of contact patch. Some 305 tires may fit the 10 inch wide rear wheel. Most 315 tires recommend at least a 10.5 inch wide wheel.
I have 18" stock wheels on my 2013 gt , these wheels are only availabe in 20 " . How will this affect my speedometer accuracy . And how do I correct it ?
At the current time, these Shelby wheels are only available in the 20" size.
Wheel and Tires can you run 20X10 on all for corners of a2011 GT500 with the SVT package?? and what tire size can you use?? Thanks
Good morning Pete1719, These wheels will not fit on the front without wheel spacers due to the width of the front brake calipers. (This is true of most wheels, not just these Shelby wheels). I am running HRE hub-centric 1" wheel spacers from American Muscle as well as the 20"X10" wheels with 295/35-20 Michelin Pilot Super Sports at all 4 corners and I LOVE how it looks and performs. I do get some tire rub on the outer edges of the fenders though, so I wanted to warn you about that. Thank you, XLR8R
Installation Time:Less than 1 Hour
Installation Time: Less than 1 Hour
June 21, 2014
The Shelby CS40 wheels rocked the appearance of my car!
These wheels look great on my car! They were designed to be run staggered (20"X9" front, 20"X10" rear) but I am using the 20"X10" all around (not recommended) and my car has the 14" Brembo brake disks with the big calipers so I am using a 5/16" shim to provide clearance between the spokes and the side of the caliper. I am very please with the way the wheels look; they remind me of the wheels on a Ford GT.
Bang for your Buck 4