(approx) 1 Hour
Simple installation for anyone.
- Customer Submitted:
- Mustang Fog Lights Installation Guide (99-04)
Hey I’m Justin with AmericanMuscle.com, and I’m taking a look at 3 different foglight options, all fitting the 99-04 Mustang, available in your choice of either chrome, yellow, or smoked. These foglights are a great low cost replacement option for a old or busted set of factory foglights, or on the other hand, if your New Edge never came equipped with a set of foglights, here’s your chance to pick some up that will really complete the front end. As I mentioned earlier, you do have 3 different options when it comes to the color of the lens. Regardless of which lens you choose, all three options do come with a bright chrome housing, but the different style comes in the form of a clear lens, which will give you a clean bright OEM look, a dark smoked lens which will give you that classic aggressive look which is a essential for helping you nail that blackout theme, and finally we have a more traditional yellow lens. If your ride did not come equipped with foglights from the factory then you’ll either need to purchase a wiring harness separately, or get a little creative and wire these in yourself. However if your ride did come equipped with foglights, then you’ll be happy to know that these lights are a direct factory replacement, meaning they’ll plug right into your factory harness without modification. Either way, getting these new foglights installed should only take you about an hour from start to finish. So if your factory foglights have seen better days or you’re just looking to install a set of fogs for the very first time, then be sure to check out one of these three options available right here at AmericanMuscle.com
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
Fitment: 1999 2000 2001 2002 2003 2004 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
February 24, 2020
2001 mustang gt
Made it easier to see father down the road. Also makes my mustang look slicker.Helpful (0)
May 07, 2019
Great product. looks great in the daylight. easy to aim, easy to install. direct bolt on. would like to have brighter bulbs, but you can get the upgrade bulbs.Helpful (0)
April 07, 2019
Absolutely no guide whatsoever on installation. Really frustrating.Helpful (0)
March 22, 2019
Nice fog housing
They install easily line right up, tint is pretty dark.Helpful (0)
February 22, 2019
It really cleans up the appearance replacing the old faded factory fog lights. Installation was simple as well as it was a direct replacement.Helpful (0)
February 10, 2019
These are great! They really finish off the look of my carHelpful (0)
January 21, 2019
Raxiom smoked fog lights
Install was pretty straight forward. I personally didnt silicone around the lens and I havent had any issues with condensation Whatsoever. Would recommend putting the car on ramps because it can be troublesome doing on jack standsHelpful (0)
November 28, 2018
Excellent look to brighten the road!
Instructions were clear and installation easy! Great look!Helpful (2)
June 12, 2018
Looks good but the light output is way below usable lightHelpful (3)
May 21, 2018
Still Looking Good
I have had these a couple of years and have drove with them over 45k miles. Still looking good, no moister has gotten in them. No burned out bulbs and I run with them on a lot. Great product. Great price.Helpful (3)
Installing these on my car? My mustang didn't come with fog lights, so is there still the same wiring as one that already has them?
Unfortunately not. If your Mustang didn't come equipped with factory fogs, an aftermarket wiring harness will be required for installation.
will hid fog light kit fit in these?
yes sure will!!!
My housings came with bulbs. Are these the raxiom elite bulbs they sell got them?
You may have received the Raxiom bulbs with this Raxiom fog light kit. However, in order to tell for sure, you can send in photos to our email of what you received so we can verify this for you.
I don’t have the fog lights at all on my mustang and was wondering where I get the wiring harness to wire it up.
At this time we do not carry a wiring harness for these fog lights.
Is the mounting hardware included with this Fog Light Kit!
The Raxiom Smoked Fog Lights will not come with the hardware and body mounted brackets. This hardware and brackets will be re-used from your GT vehicle. This kit will include the bracket for the fog lights to mount to your existing brackets on the GT models.
The Raxiom Smoked Fog Lights is designed to use the existing wiring harness and fog light switch. We currently do not carry the harness and the switch at this time.
The Raxiom Smoked Fog Lights do not come with bulb. These are intended to reuse the bulbs already used on the vehicle or simply upgrade with a new aftermarket 839 Bulb.
Hello! The Raxiom Smoked Fog Lights are only designed to work with the 893. An H10 HID will not fit.
Hello! We do not carry any fog light harnesses for the '01 Mustang.
The harness for this can be a hard find. It is actually easier to have the wiring custom made to piggy back to the parking lights so whenever the parking lights are on, the fog lights will be as well.
The Raxiom Smoked Fog Lights - Pair (99-04 GT, V6, Mach 1) will work on cars that did not come with fog lights. However you will need to buy a aftermarket wiring harness and a switch for them to work.
It does slightly but it is insignificant to visibility. If it is a big concern raxiom sells aftermarket bulbs. Sylvania superstars are also nice but i prefer piaa superwhites.
You most certainly can install these the way they come; however, it's highly recommended to apply the seal of silicone prior to installation to ensure that no moisture or condensation get into the lights once installed. Easier to do it as a preventative measure and offers peace of mind rather than going through the trouble of dissipating the moisture and sealing down the road if need be!
(approx) 1 Hour
Simple installation for anyone.
What's in the Box