Win A 2018 RTR Spec 3 Mustang! Enter Now!
Talk to a Mustang Expert
Mon - Sun, 8:30 AM EST - 11:00 PM EST

Free Shipping On Orders Over $49. Details

Sniper Fabricated Intake Manifold w/ Fuel Rail Kit - Black (05-10 GT)

Market Price $731.99 You Save 25% ($183.03)
On Sale


FREE Shipping
  • Item 394329
  • MPN# 828052

In Stock Ships same business day. Choose options to add to cart

Features & Details

  • Better Airflow to Engines Paired with a Stylish Look
  • Engineered for High-Performance Engines
  • 1800-7000 RPM Power Band
  • Fabricated from 3mm (1/8”) Sheet Aluminum
  • Designed for EFI Setups Utilizing a 4-Bolt Throttle Body
  • Bundled with Compatible 3/8” Fuel Rail Kits
  • Bolt-On Installation
  • Modified Hood Required for Most Applications
  • For use on Non-Emissions Controlled Vehicles or Racing Vehicles
  • Fits 2005-2010 Ford Mustang GT Models
Better Airflow, Higher Velocity. The runner lengths of the Sniper Black Fabricated Intake Manifold end in tapered tops to better distribute airflow across eight cylinder engines. With this more efficient airflow, the engine works better, resulting in increased velocity.

Solid Build. Created from 3mm (1/8") T6061 sheet aluminum, the Sniper Black Fabricated Intake Manifold is definitely meant to last. This material ensures that this intake manifold can withstand boosted conditions and high horsepower. On top of that, the included 3/8" fuel rail kit features -8A fittings plus a crossover braided line that can support at least 750 horsepower.

Welded to Perfection. Since the Sniper Black Fabricated Intake Manifold is 100% TIG welded, expect the perfect fit for your vehicle's engine.

Application. This Black Sniper Fabricated Intake Manifold with Fuel Rail Kit fits 2005-2010 Ford Mustang GT models equipped with the Modular 4.6L engine.

Technical Note. The Intake Manifold will need to be modified to fit on 2010 models properly. You would need to dimple the front two runners to allow enough clearance for the cast thermostat crossover. You will also need to notch a spot in the mounting flange to provide enough clearance for a coil pack mounting boss.
What's in the Box
  • (8) O-Ring Port Gasket Kit
  • (1) Hi-Rise Fabricated Intake Manifold Single Plane (1 x 4150 flange) EFI
  • (1) 1/4” NPT Hex Steel Pipe Plug
  • (3) 3/8” NPT Hex Steel Pipe Plug
  • (2) Fuel Rails, High Volume, Configured with (AN-8) Ports
  • Fuel Rail Mounting Hardware Kit (Consists of Head Cap Screws, Washers, and Brackets)
  • Steel-Braided Cross-Over Fuel Line, Configured with (AN-8) Fittings
  • (4) Fuel Rail Fittings (AN-8)
  • (1) Fuel Rail Block-Off Plug (AN-8)
Installation Info
Tech Specs
  • Engine: 4.6L 3V
  • Construction: Aluminum
  • Finish: Black
  • Emission Code: 3
  • Front Height: 8.503 in.
  • Rear Height: 8.503 in.
  • RPM Power Band: 1800-7000RPM
  • Style: EFI
  • Vacuum Ports: (3) 1/8"-28BSPT & (1) 1/4"-19BSPT

Customer Photos

You Might Also Like

6 Questions / 6 Answers

Ask a Question

Will the car need to be heavily modified or can it just be a simple bolt on like any other manifold


  • The Sniper Fabricated Intake Manifold is intended for high performance motors. It can be installed like any other manifold however, you may not see as significant gains than you would on a high horsepower build.


Helpful (0)

Where does the throttle body go on this thing???


  • This will not have a throttle body attachment point as this is for a 2005-2010 Mustang GT that has a carburetor.


Helpful (0)

Where does the throttle body go on this thing???


  • The Sniper Fabricated Intake Manifold w/ Fuel Rail Kit has a standard carburetor flange at the top to allow carb style throttle bodies to be installed.

    Rob D

Helpful (0)

In the description it says it's for a 05-10 GT, but equipped with a 2 valve... is this a typo?


  • Hey Ryan, Thank you for pointing that out! You are correct it is for the 05-10 GT 3 valve motor because of course the 2v is 96-04 GT.


Helpful (0)

Would I be able to use this manifold with the Cervini's Ram Air Type IV Hood w/ Louvers - Unpainted (05-09 GT, V6)


  • The hood may possibly still need to be modified depending on what carburetor set up you decided to use along with the Sniper intake manifold.


Helpful (0)

Does this need anything else to make fit or does it come with everything you need gasket wise?


  • Hi, This kit will contain all the needed parts to install this manifold and fuel rail.

    Chris J

Helpful (0)

More Products You Might Like

Customer Reviews (1) Write a Review

Overall Rating 4.0

out of 5 stars

Installation Time:Afternoon

  • Performance Gain 4 4
  • Fit 5 5

  • 4/5

    Installation Time: Afternoon

    March 06, 2017


    Worked very slow on it to make sure everything came out perfect an it did!!! Very good product!


    Year: 2005 Submodel: GT

    Helpful (1)

Related Mustang Categories