(approx) 1 Hour
Simple installation for anyone.
Well, here it is, our new project car, and as you can see I use the term new very loosely, you Fox body folks have been asking for it, so we’re going to give you a build unlike anything we’ve ever done before, we’re going to do a complete restoration on o
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
Technical Note. The Mass Airflow Housing and Sensor are not included. This kit is designed to reuse the stock unit.
Fitment: 1989 1990 1991 1992 1993 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
March 13, 2020
my car has stock intake manifold and this thing BARELY fits between it and the strut tower. i struggled with it for an hour to get all the boots to seal. could not use the fender bracket as it was an inch away from where the pipe needed to be to acually fit in the engine bay you get what you pay for. DOES NOT COME WITH INSTALLATION HARDWAREHelpful (0)
January 03, 2020
CAI open box deal.
Open box deal. Few scratches but who cares when you save money and get the same product! Will buy from American muscle again!!Helpful (0)
December 25, 2019
Cold air install
Went very fast. Looks great. Smoothed out the idle and no longer has a backfire when decelerating. Next purchase will be a procharger and some gauges.Helpful (0)
December 13, 2019
Sr cold air intake
Very pleased with the product very easy to put on and realy cleaned up the engine bay on my build gives my little 306 better throttle response over all easy installation took me about 30min to installHelpful (0)
December 06, 2019
for Connie to get back from the shop so this can go in. Looks good and shipping was almost as fast as my Mustang.Helpful (0)
October 23, 2019
Cleaned up my engine bay and looks great! Hopefully added a couple horses too...Helpful (1)
July 16, 2019
Fit easily and looks great. I do recommend this product to others. Good bang for the buck.Helpful (0)
April 28, 2019
Install was straight forward and a nice firm fit. I like the fact that the air intake is like a wrinkle black and not a shiny black. The only thing I didn't install was the mass air housing bracket because it would have been tough trying to line everything up right with the tight fitment.Helpful (0)
March 01, 2019
Nice For the Price
Nice looking finish works well, very easy to install.Helpful (0)
February 20, 2019
Very Good But Could Be Excellent
This product would have been Five Stars if all the connectors fit. The two connectors that linked the intake tube to the throttle body and the rear of the Mass Airflow Sensor were too tight. I got them on after a mighty struggle (and a good screwdriver). The others fit perfectly. Otherwise a great part for a great price.Helpful (0)
Is the cold air intake legal in California?
Hello! The SR Performance Black Cold Air Intake is not CARB legal.
Will this fit a CA-spec 1988?
Hi, This SR Performance Black Cold Air Intake will fit a CA spec 88 fox body that is equipped with a mass airflow housing from the factory, But it is not CARB certified for use in states that use California Air Resources Board testing.
will it fit 75mm throttle body? If not do you offer a kit that does so?
Will this fit a 70mm throttlebody ?
Yes, this cold air intake will work with a 70mm throttle body.
is this intake made of hard black plastic like the K N or is it painted steel? Painted aluminum?
The SR Performance Black Cold Air Intake will feature a powder coated intake tube.
The SR Performance Black Cold Air Intake has not been tested for CARB compliance, and would thus not be able to pass smog in California, or states adopting California emissions.
Unfortunately the SR Performance Black Cold Air Intake is designed to only work with 89-93 models with the 5.0L engine.
The SR Performance Black Cold Air Intake will come in matte black.
This will be able to be used with a 70mm throttle body.
Hello! It looks like some of our customer's were able to make this part work on pre 89 Mustangs with minor modification. However, we cannot guarantee it will work on anything other than 89-93 5.0 Mustangs
The finish of the cold air intake tube is flat black.
I didn't use L bracket either. I used the rubber mount screws that held my OEM intake.
Since this intake is designed specifically for 89-93 5.0L engines, it is not likely to provide the fit and function needed for a 2.3L engine.
This kit would not work with that adapter because that adapter is specifically for 86-88 Mustangs, and the SR Performance Black Cold Air Intake (89-93 5.0L) is for 89-93. It is not designed for your car or for that adapter.
No need to oil the filter before install
(approx) 1 Hour
Simple installation for anyone.
What's in the Box
|Year/Model:||86-93 5.0 V8||Filter Placement:||Inside Fender|
|Manufacture:||SR Performance||Computer Tune Required:||No|
Fits 5.0L V8's Only