Free Shipping On Orders Over $49. Details

Talk to a Mustang Enthusiast
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $5,000 For Your Mustang! Enter Daily

SR Performance Anti-Roll Ball Joint Kit (10-14 All)

Market Price $97.99 You Save 13% ($13.00)
Our Price


FREE Shipping

  • Item 398123

Will this fit your Vehicle?

Change Vehicle Help?
Ship to: Ashburn - 20149
Sorry, please enter a valid US or CA postal code
We're sorry, zip can't be updated at this time.
    Create a list
    Add to New List

    Saved - View your saved items

    We're sorry. We couldn't save this product at this time.

    Features & Details

    • Eliminates Sloppy Steering
    • Reduces Body Roll - Ideal for Lowered Mustangs
    • SAE1045 Forged Steel Housings
    • Ultra-strong SAE4140 Chromoly Steel Ball Studs
    • Grease Fittings Included
    • Direct Fit Replacement
    • Sold as a Set of Two
    • Fits All 2010-2014 Ford Mustang Models
    Improves Steering Performance. Do you hear loud clunking or squeaking noises when making a turn? Are the noises accompanied with poor handling? If so, then it may be time to replace those old, worn out ball joints. By installing a set of SR Performance Anti-Roll Ball Joints on your lowered 2010-2014 Pony, you will greatly improve its steering response and overall ride quality all while getting rid of those annoying noises at the same time.

    Eliminates Body Roll. Specifically designed to correct the front roll center geometry, SR Performance Anti-Roll Ball Joints feature a longer ball stud to raise the spindle in relation to the ball joint pivot point, there by achieving optimal roll center on lowered Mustangs. After installation you will experience reduced body roll, quicker steering response and an overall improvement in handling performance.

    Premium Construction. Manufactured utilizing forged SAE4140 alloy steel for the ball stud and forged SAE1045 carbon steel for the housings, these SR Performance Anti-Roll Ball Joints are incredibly strong. The included grease fittings will ensure your ball joints are properly lubricated, while the accordion-style dust boots will keep dirt from entering the joint assembly.

    Application. This SR Performance Front Lower Anti-Roll Ball Joint Kit has been specifically designed to fit all 2010-2014 Mustangs including the V6, GT, BOSS and Shelby GT500 models. Sold as a set of two Ball Joints.

    SR Performance

    Fitment: 2010 2011 2012 2013 2014 Details

    MPN# 398123

    CA Residents: WARNING: Cancer and Reproductive Harm -

    What's in the Box
    • (2) Ball Joints
    • (2) Castle Nuts
    • (2) Dust Boots
    • (2) Grease Fittings
    Installation Info
    Will it fit my Mustang?

      Customer Photos (6) Submit Your Photo

      View All 6 Photos

        Questions & Answers (4)

        4 Top Rated Questions

        Will these fit with stock 17" wheels?

        • These will work on all 10-14 Mustangs.

        Helpful (2)

        Will I need a bumpsteer kit for this? And are these the two lower ball joints for driver and passenger side?

        • This will include both balljoints. A bump steer kit is not required.

        Helpful (0)

        Can these be used on 2011 Mustangs that have not been lowered?

        • Yes, these can be used both stock height and lowered 2011-2014 Mustangs.

        Helpful (0)

        What it is the warranty of it.

        • The SR Performance Anti-Roll Ball Joint Kit will not carry a warranty on it.

        Helpful (0)
        Post Your Question

          Customer Reviews (5) Write a Review

          Overall Rating 4.6

          out of 5 stars

          Installation Time:Full Day

          Installation Cost:$500-$1000

          • Handling Improvement 4.8 4.8
          • Fit 4.6 4.6
          • Bang For Your Buck 4.4 4.4

          • 5/5

            Installation Time: Full Day

            August 04, 2019

            Easy install good quality

            Installations was easy however my old ball joint was rusted to the control arm. Leaving some penetrating spay on it over night allows for them to be removed a little easier


            Year: 2014 Submodel: V6

            Helpful (0)

          • 5/5

            Installation Time: Afternoon

            May 20, 2019

            Noticeably better!

            My mustang has bigger wheels, lowering springs, struts and strut mounts and I have been needing to replace the ball joints. These ball joints were the perfect addition to the front end to get it back in the correct geometry along with some bump steers. Not to mention the bang for your buck aspect! I would recommend for any lowered stang.


            Year: 2010 Submodel: GT

            Helpful (0)

          • 3/5

            Installation Time: Full Day

            Installation Cost: $500-$1000

            January 18, 2019

            Worked great while they lasted..

            So I did a full upgrade on my suspension (koni st.r and eibach struts and springs, steeda bumpsteer kit along with these ball joints) and it was an awesome improvement, noticable immediately but these ball joints gave out after about a year and a half, I do drive the car quite a bit so i added up aprox. 20-25k miles in this time. I was just hoping they'd last last longer. I'm currently waiting on the steeda x11 balljoint and hoping for better longevity.


            Year: 2012 Submodel: V6

            Helpful (1)

          • 5/5

            Installation Time: Afternoon

            December 20, 2018

            Great set!

            It's definitely a noticable difference! They were pretty easy to install too, rented a ball joint press from autozone and it only took about two hours for both sides. And another 45 mins for the alignment. The stud is about 3/4 of an inch longer than stock so don't be alarmed if it doesnt look identical to the stock ones once you press them out.


            Year: 2011 Submodel: GT

            Helpful (3)

          • 5/5

            Installation Time: Full Day

            January 18, 2018

            Any upgrades!

            Any upgrades to your suspension really needs to be done at its core, tie rod ends and ball joints! This is a great kit but you need a press


            Year: 2010 Submodel: Other

            Helpful (15)

          Related Mustang Categories