Free Shipping On Orders Over $49. Details

Talk to a Mustang Expert
1-877-887-1105
Every day 8:30AM EST - 11:00PM EST
Win Any Wheel & Tire Package! Enter Daily

Vortech V-3 Si-Trim Supercharger Kit w/ Charge Cooler - Satin (05-08 V6)

This item currently can not be added to your cart. Please try again later.
    Create a list
    Add to New List

    Saved - View your saved items

    We're sorry. We couldn't save this product at this time.

    Features & Details

    • 330 Horsepower, 337 Lb/Ft Torque
    • Complete Kit - Diablosport Programmer Included
    • V-3 Si High-Output System
    • Self Lubricating Supercharger
    • Satin Trim Finish
    • Air to Water Intercooler
    • 10 PSI at Red-Line
    • CARB EO # D-213-27
    • Fits 2005-2008 4.0L V6 Mustangs
    More Power! The stock 4.0L V6 Mustangs came with a decent 210 Horsepower and 240 lb/ft of Torque from the factory, but after installing a Vortech V-3 Si-Trim High Output Supercharger you will be planting a healthy 330 Horsepower and 337 lb/ft of Torque to the pavement. That is 120 more horsepower over stock!

    Complete Kit. This Vortech High Output Supercharger System comes with all the required parts needed to upgrade your mild pony to a wild stallion. The kit features a satin V-3 Si-Trim Supercharger, an air-to-water intercooler, fuel management upgrades including high-capacity fuel injectors, and a DiabloSport Predator Tuner to re-flash the stock ECM.

    CARB Certified. Best of all this Vortech V-3 Si-Trim High Output Supercharger Kit is 50-state smog legal under Carb EO# D-213-27.

    Application. This Satin Vortech V-3 Si-Trim High Output Supercharger is specifically designed for use on 2005 to 2008 Mustangs equipped with the 4.0L V6 engine. Please select your year from the dropdown option above.

    Technical Note. ECM reprogramming will be required when additional aftermarket parts are added including but not limited to MAF meters, cold air intakes, smaller supercharger pulley, headers and exhaust modifications. Supercharged horsepower and torque numbers shown are a calculated estimate based on percentage increases from actual rear wheel hp/tq measurements.

    Please Note: Vortech Supercharger System are built to order by Vortech for our customers. Because of this there can be a 5 to 7 day lead time on orders.

    CA Residents: Warning: California's Proposition 65

    What's in the Box
    • V-3 Si-Trim Supercharger
    • Air-to-water dual-pass intercooler
    • DiabloSport Predator Hand Held Tuner
    • High-capacity Fuel Injectors
    • All required hardware
    Installation Info
    Tech Specs
    Specifications.
    • V-3 Si-Trim (V-3 self lubricating supercharger)
    • Satin finish
    • Boost (PSIG):10
    • Diablosport Predator programmer included
    • Includes High-capacity fuel injectors
    • Air-to-water inter-cooler included
    • CARB EO # D-213-27
    • Professional installation recommended

    You Might Also Like

    Customer Photos

    Questions & Answers (14)

    5 Top Rated Questions

    Horsepower Any idea if the 330 number is estimated from the flywheel or the rear wheels?

    • That is wheel horsepowers. Only the factory notes flywheel horsepowers.

    Helpful (2)

    can you use a strut tower brace with this supercharger kit

    • Unfortunately, we have not yet test fit a strut tower brace in conjunction with this supercharger kit and are unable to confirm fitment at this point in time.

    Helpful (0)

    Hi, how much fuel economy is affected by this supercharger? And what about whistling sound, is it quiet or loud? Thanks.

    • Under normal driving conditions, the Vortech V-3 Si-Trim Supercharger System will have a minimal effect on mpg, however at WOT significantly more fuel will be used. This will have a good amount of noise to it.

    Helpful (0)

    Do I need higher octane gas after installation? (My mustang is currently taking 87 octane)

    • The Vortech V-3 Si-Trim Supercharger System will require 91 or 93 octane fuel, depending on what is available in your area.

    Helpful (0)

    I have a 2005 mustang v6 with a 2010 v6 engine, will this fit?

    • The Vortech V-3 Si-Trim & Charge Cooler is designed for the 05-08 V6 Mustangs. It will not work with a 2010 engine.

    Helpful (0)
    Post Your Question
    9 More Questions
    Is this a turn key install? As in once I install this on my 06 mustang I will be able to start up and drive right after install? 1 answer
    If I have a cat back exhaust will this supercharger be okay with it ? or is it only meant for completely bone stock applications 1 answer
    Would you recommend any upgrades to suspension, hoses, brakes, cats or headers, etc. before buying this? 1 answer
    Will the stock clutch of a 2007 be able to handle the added power of this supercharger? Or is upgrading to a stage 2 necessary? 1 answer
    With this exact kit, will I need forged internals so nothing breaks? Or is it tuned and not too much PSI for anything to bust. Or would I need things for handling? Basically, is there anything I should get for prepping my car before purchasing the Supercharger kit? 1 answer
    How hard would it be to fit this onto a 2010 4.0L V6? I don't really want to go supercharger just because of the limited top end torque. 1 answer
    Are previous mods needed? Does this kit include everything needed to work well in a stock mustang v6? Or are there additional mods that should already be done to the car before this kit is installed? 1 answer
    Can this effect my automatic transmission negatively? 1 answer
    Diablo Tuner Is there a way to get this without a tuner if we already own one. 1 answer

    Customer Reviews (2) Write a Review

    Overall Rating 5

    out of 5 stars

    Installation Time:Weekend

    • Performance Gain 5 5
    • Fit 5 5



    • 5/5

      Installation Time: Weekend

      March 22, 2016

      Review from Vortech V-3 Si-Trim Supercharger Kit w/ Charge Cooler - Polished (05-08 V6)

      Did i get a V8??

      My friend who is a mechanic and i installed this over the weekend and as soon as i started it up and put it on the streets i felt a total difference. A whole lot more power was put to my V6 mustang. You will need some special tools but other than that it is just time consuming, you will not regret this buy.

      LuisG

      Year: 2008 Submodel: V6

      Helpful (8)

    • 5/5

      Installation Time: Full Day

      March 20, 2016

      Review from Vortech V-3 Si-Trim Supercharger Kit w/ Charge Cooler - Polished (05-08 V6)

      Watched my friend install this, amazing. He loves it. Crazy how much of a difference this does.

      WOW, amazing. This supercharger is absolutely amazing. It looks us about a day to install and it was totally worth it. I recommend anyone that has a v6 to get this

      Moreh1105

      Year: 2006 Submodel: V6

      Helpful (8)

    Related Mustang Categories