Installation Time
(approx) 20 Minutes
Difficulty Level:
Simple installation for anyone.
Installation Guides
Guaranteed Free Delivery by 12/24! available on most items - Details
$69.99 (set of 4)
FREE Shipping on orders over $119 Market Price $81.99 You Save 15% ($12.00)Open Box from $31.50
Add Local Shop Installation
Saved - View your saved items
We're sorry. We couldn't save this product at this time.
or use
Justin: The Axial Smoked LED side markers will appeal to all 2015 and newer Challenger owners out there who are looking to help complete that smoked look with their ride and wanna add some very bright LED lighting in the process. Now, the Axials will be sold in sets of four, two fronts and two rears offer right around the $100 price point.So, first things first, guys, I do wanna say that if you're just simply looking to smoke the marker lights on your Challenger, you can certainly save a bunch of money and just go with the traditional vinyl tint instead. In fact, you can tint every exterior light on your ride using the SEC10 kit here on the site for roughly half the price of the Axials we're talking about here today. Now, on the other hand, if you really dig that smoked look and you would like to also add some brightness through a modern LED along with that unique light pattern, well then, the Axials might just be for you.Now, let's talk a little bit more about that unique pattern because, unlike the factory side markers that utilize a single DOL incandescent bulb, the Axials are gonna utilize more of a high-intensity LED strip that will illuminate the length of the marker itself. Now, compare that to the factory housing, especially one that's been covered with some smoked vinyl and you're getting that one lone bright spot or hotspot in the middle while the rest of the marker is just kind of dead, for lack of a better word.Now, those LEDs are gonna be housed in the ABS plastic base while being topped off with that smoked polycarbonate lens. And these guys will be a direct replacement for your factory marker lights, meaning there will be no modification needed, no crazy wiring, anything like that. These things are completely plug-and-play. So, because of that, the site is gonna call this a pretty soft one out of three wrenches on the difficulty meter here guys, maybe 20 minutes of your time to complete from start to finish.Now, as far as your tools are concerned, well, there will be a screwdriver or two needed along with a panel removal tool, flashlight, and even a rag just to wipe everything down when you're all set. Now, speaking of that install, we actually have an AM Challenger customer to walk you through the job right now. So, feel free to check that out.Chris: Hi, I'm Chris. This is my 2019 Dodge Challenger Scat Pack 1320. And today, I'm getting rid of these old side marker reflectors and replacing them with LEDs. It's gonna look really great.In order to access this area behind your side marker light, you're gonna need to be able to take either your Challenger factory airbox or, in this case, a cold air intake that I installed myself. Set that aside. And now I can go through the bottom of my airbox and reach through [Inaudible 00:02:56.921]. And then all you have to do is pull back on this red clip. It's a little stiff. And then work the plug off while being cognizant of not pulling that wire out the well. And that's it. Set this aside. If you ever need it again, you'll have it available to you. Now, to install the better Axial line, all we have to do is repeat the steps. Find the housing in the back and then it snaps in place. Pull your film off, give it a little polish, and the front side marker is ready to go.For the rear marker lights, all I'm gonna have to do is go up under the vehicle. And as the picture indicated below, you just snap this one out. If you have trouble getting into the wheel well, you can also raise the vehicle slightly on a jack. Replace it with the Axial light. After the left side's done, work your way over to the right. The right side is gonna be a whole lot easier, especially that front right side marker simply because you don't have to remove that air intake. Same thing for the rear. After that, close your hood up and turn on your lights and enjoy.Justin: So, again, if you are looking to smoke the marker lights on your 2015 and newer Challenger while adding some modern and bright LEDs at the same time, then you'll definitely wanna check out the Axial kit right here at americanmuscle.com.
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
Fitment:
Raxiom CH3216
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Installation Info
Installation Time
(approx) 20 Minutes
Difficulty Level:
Simple installation for anyone.
Installation Guides
What's in the Box
10 More Questions