(approx) a Day
Light to Moderate mechanical skill required.
Features, Description, Reviews, Q&A, Specs & Installation
Fitment: 1994 1995 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
April 17, 2019
Header over Heels in Love!
Was a simple install. All the hardware I needed and gaskets. These headers fit nicely into my already tight space and for anyone in the 50 state smog areas. Those Carb EO's are nice and easy for the smog techs to see. Catches plenty of attention when popping the hood or at shows. Now one recommendation I do have is, replace the gaskets with a better material gasket than the one provided with these headers. I blew out two of the bbk gaskets and replaced them with better ones from ford racing and haven't touched the since.Helpful (0)
April 27, 2017
I have not installed them yet but the welding is a bit sloppy and I was told that there was no bug for the EGR valve but there is. So you will have to order a cap. I'll update when installed. Hopefully fitment will be ok.Helpful (7)
March 19, 2016
I was worried the removal of my stock headers would be strenuous, but it turned out to be relatively easy. Took us an afternoon to install because we also pulled the whole AC system. I made sure to use ARP bolts instead of those supplied with the headers, but that's just personal preference. These sound great. Overall great productHelpful (8)
August 04, 2014
1994 GT BBK Ceramic Header install
I purchased these since I broke two of the studs on stock manifolds and had transmission out so it made sense to change headers than and mate up to the 2 1/2 BBK "h" pipes. Great fit up and pretty easy install with no clearance issues with steering arm and knuckle. Tight fit for 3/8 bolts (come with headers) so make sure you have long and short socket for header bolt access. I am please with BBK product and recommend them for the price.Helpful (8)
August 26, 2013
BBK Shorty Headers
I purchased the BBK headers along with the BBK x-pipes. The delivery time was great as usual. I can't comment on the install process because I took my car to the shop, but they said it was a pretty simple install. As far as performance, you definitely can feel and hear the difference once you step on the gas. Next is the tune. I am very pleased with these mods.Helpful (7)
July 01, 2013
Great product and was as bad as I thought it would be to install.Helpful (7)
June 05, 2013
Easy install sound amazing and look great. Very happy with it.Helpful (7)
February 15, 2013
A lasting impression right of the bat.....
Received the box from UPS and upon opening the box was blown away! The quality of these headers is apparent as soon as you see them. Nice thick flange, beautiful color and solid construction. Can't wait to get my x-pipe so I can get them installed. I could not comment on fit or performance gain since they haven't been installed yet but if they perform as great as I expect, it will be awsome. Thanks AM for making another great product available.Helpful (7)
March 24, 2012
95 Mustang Headers
I recently installed these headers on my 95 mustang.easy to install sound great, looks good. If you want better performance and a better sounding car I would recommend these headers, I have purchased a 3.73 rear end, magna-flow exhaust,75 mil throttle body,under drive pulleys, performance chip,cold air intake and more. all from American Muscle and must say I have been very satisfied with all the products. If you have a stang this is the only place to buy. Quality products fast delivery.Helpful (7)
December 07, 2011
This is a great product and have no complaints other than the bolts that came with it to mount it on the heads are quite short they go on and will hold but I would recommend getting longer bolts from ARP or some where else. Flange is nice and thick so no worries of warping and dang it, they just look SO good under the hood. Little tough though to get on becasue there isnt much room to use a socket with the bigger primaries but an open or closed wrench will work just fine. I also recommend getting a mid pipe with high flow cats or no cats at all just so you keep that exhaust flowing all the way throughHelpful (7)
I've heard of different types of shorty headers(equal length, unequal length). what type are these headers?
The BBK 1-5/8 in. Ceramic Shorty Headers are unequal length headers.
Can you explain to me what the difference is between these exhaust headders and the ones you have listed here: https://www.americanmuscle.com/bbk-1-5-8-ceramic-shorty-headers-9495-gt-cobra.html?rm=t vg=3d940722-3352-4dbd-7cae-d957c96186cf utm_campaign=TRIGG Browse Abandoned V5 utm_medium=email _bta_tid=043292383521392126589675877619029958754442547708610446999935045032844937404855104274912696481825481053 utm_term=AbItem utm_source=bm23 utm_content=AbItem It looks as though both have the same box contents and both are ceramic coated. Is it the polish coating or is there more to it then that?
The BBK 1-5/8 in. Shorty Headers item: 398407 will have a Chrome finish, and the BBK 1-5/8 in Item: 56065 Shorty Headers will have a Ceramic finish for the coating of the headers.
My cobra is already straight piped with SLP1 cat-back and a BBK H-pipe, how much louder would this make my car? Also what kind of "horsepower" gains would I make?
The BBK 1-5/8 in. Ceramic Shorty Headers will provide a slight increase in exhaust volume. Average horsepower gains are between 10 and 15hp.
Would these shorty headers fit on the GT40X turbo swirl aluminum heads, if not would the bbk long tubes be a better choice?
The BBK Ceramic Shorty Headers would fit the GT40x heads without any issues. The Long tubes would be a better option for performance, but will have more clearance issues leading to a more difficult install.
do these have the port for the EGR? deleted mine and really looking for headers that dont have it, also these do fit the 94 cobras?
The BBK Ceramic Shorty Headers do have an EGR bung, however, it can be plugged, if you do not wish to use it. This will fit a 1994 Cobra.
No unfortunately, these headers will not fit the GT40 heads.
(approx) a Day
Light to Moderate mechanical skill required.
What's in the BoxHardware included:
|Header Type:||Short Tube||Finish :||Polished Ceramic|
|Type Mid Pipe Required:||Standard||Fitment:||1994-1995 5.0 V8|
Fits 5.0L V8's Only