Simple installation for anyone.
- How to Install AmericanMuscle Wheels on Your Mustang
- Customer Submitted:
- How to Install Wheels on Your 1979-2013 Mustang
$179.99 (each)FREE Shipping
Popular Tire Sizes for this Wheel
Hey I'm Justin with AmericanMuscle.com and I'm excited to be bringing you our American Muscle 2013 GT500 style wheels, fitting all 2005 and newer Mustangs, available in your choice of either charcoal, or gloss black. Ok so we know the 2013 GT500 is pretty much the holy grail of far as Mustangs are concerned, I mean over 600+ horsepower, 200mph top speed, and that menacing front end, let's just say there's a lot to love. Once area that instantly grabbed the attention of a lot of Mustang fans was the wheels, the new for 2013 mesh design was a big hit with a lot of people, and so the demand for an affordable supercar style wheel was born. Our answer, the 2013 GT500 style wheels available in gloss black, or charcoal. These lightweight aluminum wheels feature the same 16 spoke mesh design that helped the 2013 GT500 achieve its unique aggressive look. As you can see our wheels do feature a little bit of dish or concave, flaring out from the lugholes to that flangelesss style lip, to give the wheels themselves a little more depth and character. As for the sizing, the GT500 style wheels are offered in either an 18, or 19" diameter, and in widths ranging from 8 to 10 inches. You all know the deal by now, stick a wider tire and wheel in the rear, and you'll have the staggered fitment, just like the 2013 GT500. Or on the other hand, if you want to retain the ability to properly rotate your tires in the future, then the standard fitment may be the better option, just stick the same width tire and wheel on all 4 corners, and you should be good to go. You can purchase these wheels by themselves if you like, however if you need some new rubber to go along with your new wheels, why not let us do all the work for you? We do offer a couple of different tire and wheel combinations, where we pair your new GT500's up with some of the top brand tires on the market today, in sizes that are guaranteed to fit your Mustang without rubbing, even if you're lowered an inch or two. On top of that you get to take advantage of our free mounting and balancing, and free shipping and handling. Finally, all AmericanMuscle wheels are backed by a one year warranty on all finishes, and a lifetime structural warranty. If you've never installed a set of tires and wheels before, don't worry it couldn't get any easier, all you need is some basic hand tools and a floor jack. Go ahead and crack those lugs loose first before you get the car in the air, once you've jacked the car out simply swap out all 4 wheels and tires and that's it, doing all this should only take you about an hour from start to finish. Even though the 2013 GT500 wheel may be a little radical for some of the traditionalists out there, there's no denying the modern mesh design looks great on the S197, and now your Mustang can share the same supercar styling, thanks to our GT500 style wheels available right here at AmericanMuscle.com
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
Note: Priced per wheel.
Fitment: 2015 2016 2017 2018 2019 2020 Details
Mounting & Balancing: AmericanMuscle offers professional mounting and balancing on all wheels and tires when purchased together on the same order. This will allow you to swap out your old wheels for your new set when they arrive.
What is TPMS? The Tire Pressure Monitoring System (TPMS for short) is a factory installed safety feature on all 2007 and newer Ford Mustangs that alerts you when your tire pressure drops to an unsafe limit.
How do I keep my TPMS feature? Aftermarket wheels do not come with TPMS sensors. However, if you select 'Add TPMS Sensor Kit' and your specific year range from the options listed above, we'll install the TPMS Sensors in your new wheels!
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
September 04, 2019
Great look and performance
Came in great shape, easy mount and balance, just make sure you get lug nuts with them, factory ones won't fit. Fill out the wheel wells great. Recommend!Helpful (0)
April 12, 2019
Only issue I had is where the wheel caves in for the lug nuts there is some scraping probably from the tire machine for mounting, it will likely buff out. Also, my wheels were counter balanced but there no vibration so no big deal. Other than that they look great and feel fine. The Sumitomo tires are a little louder with road noise than my stock Hankooks but still not too loud, especially with an exhaust.Helpful (0)
April 07, 2019
Love the wheels
They sit perfectly and around my area these wheels aren’t seen much. Cannot complain at all.Helpful (0)
May 02, 2018
Best decision I’ve ever made in my life these rims make my car stand out tremendously!Helpful (9)
October 06, 2016
The wheels came packaged great, the 19x10 itself is a beutiful wheel at an affordable price. Although with these wheels right next to an actual 13/14 GT500 there are a few differences but nothing too major to not say they aren't similar.Helpful (10)
wanting to get black lug nuts to match which ones fit with this rim?
These here, for example, would be a great fit with the wheels:https://www.americanmuscle.com/black-acorn-lug-nuts-1516.html
With the TPMS sensors that you can add to the purchase, are they Ford self-learning sensors or do they have to be programmed.
You would require the TPMS Transmitter Tool to re-calibrate the sensors and we have a complete kit here for you: https://www.americanmuscle.com/frpp-tpms-fullkit-2015.html
how much do they weigh
These wheels would weigh about 28 lbs.
I have already purchased these wheels and I’m looking to swap out the center AM piece are there any alternatives available on American muscle that would fit
We have this center cap here that would fit: https://www.americanmuscle.com/black-aluminum-center-cap.html. Unfortunately, the other Ford center caps that we have wouldnt secure properly due to the prongs being too short to clip in.
I have already purchased these wheels but I’m looking to swap out the center AM piece are there any alternatives available on American muscle that would fit
Absolutely! You can use any of the AmericanMuscle branded 2.5" center caps on this page: https://www.americanmuscle.com/2015-mustang-center-caps.html
The 2013 GT500 Style Gloss Black Wheel will clear MGP caliper covers.
The 2013 GT500 Style Gloss Black Wheel in a 19x10 is designed to fit the rear of the Mustang only because of clearance and fitment issues in the front. If you would like to get a square set up we recommend getting them in a 19x8.5 (Part #389252G15) or 19x9.5 (Part #389254G15).
Simple installation for anyone.
What's in the Box
|Offset:||1.88 Inches, 48mm|
|Backspacing:||7.39 Inches, 187mm|
Does not fit Shelby GT350 or Mustangs with an upgraded Aftermarket Big Brake Kit.