Customer Reviews (9) Write a Review

Overall Rating 4.9

out of 5 stars

Installation Time:Afternoon

• Handling Improvement 4.875 4.9
• Fit 5 5
• Bang For Your Buck 4.875 4.9

• 5/5

  Installation Time: Afternoon

  February 27, 2018

  Much Needed Item

  Got this to go w\ BMR adjustable UCA as it makes sense to upgrade the UCA mounting bracket along w\ the UCA to strengthen the rear axle. This bracket is very heavy and solidly built so you know the UCA mount isn't gonna be flexing around under load which will enhance the UCA's performance. Install was straightforward and time consuming but the payoff is well worth the effort!

  DaleL

  Year: 2009 Submodel: GT

  Helpful (1) Thanks for your input!

  • Handling Improvement 5

    5

  • Fit 5

    5

  • Bang for your Buck 5

    5
• 5/5

  November 07, 2017

  Review from BMR Rear Upper Control Arm Mount - Red (05-10 All)

  Feels Tight!

  2008 GT. Lowered about 1 inch with Ford Racing P springs, Billstein shocks and struts, Ford Racing GT500 front control arms, and Moog outer and OPR inner tie rods, with Moog sway bar links. The BMR upper and lower control arms, both non adjustable, plus the BMR differential bushing seems to work well, and makes the car feel even more planted. I don't feel the wheel hopping side to side anymore on hard accleration. The upper conrol arm, mount, and the differential bushing also got rid of this crazy loud clanking I was experiencing due a worn OEM differential bushing. Overall, it's a good buy. Cheaper than stock parts yet better performing. I'd recommend.

  Yoyo1

  Year: 2008 Submodel: GT

  Helpful (2) Thanks for your input!

  • Handling Improvement 5

    5

  • Fit 5

    5

  • Bang for your Buck 5

    5
• 5/5

  November 03, 2017

  08 GT500

  This is a well built piece, highly recommended. I broke my other aftermarket upper control bracket from Metco, bad design, the center bolt was barely hanging on, this could have been ugly!!

  RandyB

  Year: 2008 Submodel: GT500

  Helpful (1) Thanks for your input!

  • Handling Improvement 5

    5

  • Fit 5

    5

  • Bang for your Buck 5

    5
• 5/5

  June 07, 2017

  Review from BMR Rear Upper Control Arm Mount - Red (05-10 All)

  It really works

  If your changing the upper control arm you really should change the bracket too.BMR is the way to go.i am happy that I did .

  GTCS

  Year: 2008 Submodel: GT

  Helpful (2) Thanks for your input!

  • Handling Improvement 5

    5

  • Fit 5

    5

  • Bang for your Buck 4

    4
• 4/5

  August 17, 2016

  Review from BMR Rear Upper Control Arm Mount - Red (05-10 All)

  Well built

  This control arm mount is 100 percent better than the stock flimsy mount. Definitely recommend.

  Dailydriven50

  Year: 2010 Submodel: GT

  Helpful (3) Thanks for your input!
• 5/5

  Installation Time: Afternoon

  February 19, 2016

  Good strong piece

  This piece is much beefier than the OEM part. If you're already doing the upper control arm, you might as well do this while you're at it to save time.

  Daniel

  Year: 2005 Submodel: GT Morro Bay, CA

  Helpful (2) Thanks for your input!

  • Handling Improvement 5

    5

  • Fit 5

    5

  • Bang for your Buck 5

    5
• 5/5

  Installation Time: Afternoon

  February 21, 2014

  Bmr upper mount rules!!

  Best upper mount out there. Beefy and structurally sound. If your drag racing or road racing this is a must for pinion angle adjustability. Goes great with all the bmr products I just purchased for my 07 mustang.

  Kipp07gt

  Year: 2007 Submodel: GT York, SC 29745, USA

  Helpful (2) Thanks for your input!

  • Handling Improvement 5

    5

  • Fit 5

    5

  • Bang for your Buck 5

    5
• 5/5

  Installation Time: Afternoon

  July 27, 2012

  A must if you replaced the factory UCA

  At first I thought it wasn't going to really matter when it came to replacing the UCA mount, but when I added the BMR UCA the rear end began to clunk even more. After replacing the factory mount with the BMR one, I literally have a silent rear end again, along with this assisting the new BMR UCA I have, the rear of the car feels much more planted. Definitely worth every penny.

  CDCohen

  Year: 2009 Submodel: Bullitt Potomac, MD

  Helpful (4) Thanks for your input!

  • Handling Improvement 5

    5

  • Fit 5

    5

  • Bang for your Buck 5

    5
• 5/5

  Installation Time: Afternoon

  March 31, 2012

  Big upgrade from stock!

  When you think muscle car, you think power. When you think power, you hope that the suspension/mounts can hold up. This mount was built for power. You can tell this was built to take a beating just by looking at it! Very big upgrade over stock. Install was involved to say the least. You have to lower the fuel tank just to install. You will need an oversized T50 Torx to remove the fuel tank if your vehicle has addressed the recall and I HIGHLY recommend at least a 18" socket extension for this install! Makes things MUCH easier! Just take your time, read through the installation prior and make sure you have everything you'll need to tackle the install. Also, might as well upgrade the UCA while you're there because it's a P.I.T.A. to get it into the mount.

  bakerjd

  Year: 2006 Submodel: GT Ohio

  Helpful (5) Thanks for your input!

  • Handling Improvement 4

    4

  • Fit 5

    5

  • Bang for your Buck 5

    5