(approx) 1 Hour
Simple installation for anyone.
Features, Description, Reviews, Q&A, Specs & Installation
Fitment: 2011 2012 2013 2014 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
June 06, 2019
Shipped in timely manner just wrong part for my carHelpful (0)
March 25, 2018
Really can see a difference in the air flow. Kinda has a whisping sound. Can’t go wrong buying thisHelpful (9)
May 11, 2017
Really good CAI
I've read where some have bashed this intake but it's still a pretty good CAI. Only issue with had was the fact that I could tell it was a return. Some parts were already installed on the tube, some scuffs here and there, and the new pcv connector had used looking motor oil. AM returns just need to inspect the returned products better and feel that I shouldn't pay full value for a used item. They did give a new filter though. Any who...the coupler that goes to your TB can be a tight fit and take a minute. Installation was a breeze and didn't need instructions, though the instruction sheets were oily, dirty and definitely used by someone.Helpful (10)
April 14, 2017
Not that great.
I was told there was no other CAI for the Cobra Jet Intake available. After ordering this unit and speaking with Ford, the whole package was available. Had I known I would NOT have ordered this piece. The air dam doesn't install as it should as the CA Tube will not line up. I had to re adjust just to make it fit! The Air Filter itself rubs against the Radiator Cover and the Filter has a couple of creases in it. Not worth the $300 AT ALL!! Get the Ford Unit. Even if you have to get it somewhere elseHelpful (11)
December 09, 2016
Great intake AND looks amazing. Make sure you get a good tune for the whole cobra jet intake system. I made 435 on the dyno with longtubes off road x pipe and dyno max race bullets.Helpful (10)
November 02, 2016
JLT Intake Cobra Jet
The product came packaged great with sufficient space to not get damaged. All parts came in as well. The structure and the intake tube were strong. It fit perfectly and I had no rubbing issues anywhere. Great product overall!Helpful (10)
October 05, 2016
Im impress with this cold air intake i really liked this brandHelpful (11)
September 27, 2015
Looks Great with the CJ Intake Manifold
Netted 423/371 on the dyno with only bama's 93 octane tune, CJ intake, Monoblade throttle body and JLT IntakeHelpful (10)
December 23, 2014
Cobra Jet JLT CAI
It was either this or fords Conra Jet CAI for $20 more. They're basically the same thing but I prefered red filter over the blue. It's totally worth it to go with the cobra her manifold. Takes a aftrrnoon to install all Cobra Jet parts.Helpful (10)
I have a 2016 mustang gt would this fit the only parts that say fit are the cj manifold
Correct. This JLT Performance 5.0L Cobra Jet Cold Air Intake Kit is specifically designed to fit 2011-2014GT and 2012-2013 Boss 302 Mustangs with the Cobra Jet 5.0L Intake Manifold installed.
Would there be a tune difference between the JLT Performance Cobra Jet Cold Air Intake and the Ford Racing Cobra Jet Cold Air Intake?
Due to differences in diameter between the JLT Performance Cobra Jet Cold Air Intake and Ford Performance Cobra Jet Cold Air Intake, there will be tune differences.
I have a 2011 mustang GT but just a stock manifold could I still put this on there
This JLT Performance 5.0L Cobra Jet Cold Air Intake Kit is specifically designed to fit 2011-2014 GT and 2012-2013 Boss 302 Mustangs with the Cobra Jet 5.0L Intake Manifold installed.
Question, will this CAI fit on an automatic 5.0? I have the CJ intake manifold, and the twin 65 mm throttle body, I just want to know will this fit before I make a purchase.
Hello, Yes the JLT Performance Cobra Jet Intake Cold Air Intake will fit the 11-14 5.0 mustangs
I’m looking into getting the Cobra jet intake, which CIA would be best? This JLT intake or the Ford performance intake?
Both of these intakes would be great choices! I personally ran JLT on my cars and they are a very well made intake system! As for the Ford Performance intake, you can never go wrong with Ford!
The JLT Performance Cobra Jet Intake Cold Air Intake requires the use of Cobra Jet Manifold and either the Ford Performance Twin 65mm Cobra Jet Throttle Body ( Item #: 50517) or Ford Performance Super Cobra Jet Oval Throttle Body (Item #: 50337)
The JLT Cobra Jet Intake Cold Air Intake's filter size is 4.5" by 9".
The Boss 302 strut tower brace should fit the Cobra Jet Manifold with no issues! This will also clear the factory hood!
(approx) 1 Hour
Simple installation for anyone.
What's in the Box
|Year/Model:||2011-2014 GT w/ Cobra Jet Intake Manifold||Filter Placement:||Engine Bay|
|Manufacture:||JLT||Computer Tune Required:||Yes|
Designed for the Cobra Jet Intake Manifold.