$7,000 Summertime Mustang Build Enter Now!
Talk to a Mustang Expert
1-888-332-7930
Mon - Sun, 8:30 AM EST - 11:00 PM EST

Free Shipping On Orders Over $49. Details

K&N FIPK Cold Air Intake (2010 V6)

Market Price $369.14 You Save 13% ($48.15)
Our Price

$320.99

FREE Shipping
  • Item 389719
  • MPN# 57-2577

In Stock Ships same business day. Choose options to add to cart

Features & Details

  • Increases Throttle Response
  • Improves Horsepower and Torque
  • Series 57 FIPK Kit
  • Free-Flowing High Density Polyethylene Intake Tube
  • Light Weight Plastic Heat Shield
  • Oiled Air Filter Removes Harmful Contaminants
  • Filter is Washable and Reusable
  • NO Computer Tune Required
  • Simple Bolt-On Installation
  • 50 State Street Legal - CARB EO Number: D-269-38
  • Fits All 2010 V6 Mustangs
Improves Power and Performance. The 2010 V6 may not be the fastest Mustang in Ford's corral, but their owners love them all the same. With that being said the V6 could use a little help in the power department. An easy way to boost your Pony's power numbers is by installing a K&N 57 Series FIPK Cold Air Intake. The FIPK Intake replaces your 4.0-liter V6 Mustangs restrictive factory air box and paper filter element with a free-flowing polyethylene intake tube and a high flow K&N filter assembly for a measured improvement in incoming air. This improvement in air flow will allow your engine to breath much easier, resulting in more power you can use to pass slow moving traffic.

No Tune Required. Unlike other Cold Air Intakes on the market for the 4.0-liter V6 Mustangs this K&N Series 57 FIPK CAI does not require a computer re-tune. The engineers at K&N really did their homework to improve your pony's power using the factory tune.

Filters Out Harmful Contaminants. The supplied K&N Filter successfully filter's out harmful contaminants with it's unique layered design. K&N Air Filters are made up of layers of specially treated cotton gauze that are sandwiched between two epoxy-coated aluminum wire screens for durability. K&N uses a specially formulated grade of oil to treat the cotton gauze layers which causes a tackiness throughout the cotton's microscopic strands creating a powerful filtering media that ensures engine protection.

Washable, Reusable Filter. K&N designed their high flow air filters to be reusable. That means there is no need to buy a new filter every few thousand miles, you can just clean the filter, re-oil it, and save money with a K&N Filter Recharge Kit.

Straight Forward Installation. Designed to be a direct fit replacement for the factory intake this K&N FIPK Cold Air Intake Kit installs with just basic hand tools. No extra modifications or special tools are required for an easy 1 hour installation. All necessary parts and instructions are included.

Recommended Upgrade. Even though a re-tune is not required for operation, AmericanMuscle recommends a custom tune with a Mustang Handheld Tuner. By reprogramming the vehicles computer (ECU) to you will get the best possible power and performance increases from this cold air intake.

CARB Certified. Best of all this K&N 57 Series FIPK Cold Air Intake is 50-state smog legal under Carb EO# D-269-38.

Application. This K&N 57 Series FIPK Cold Air Intake Kit is specifically designed to fit 2010 Mustangs equipped with the 4.0L V6 engine and does not require re-tuning the vehicles computer for operation.

Note: Coupon codes cannot be applied to this product.

Fitment: 2010 Details

What's in the Box
  • (3) Hose Clamp #44 Stainless
  • (1) Hose; 3” ID X 2-1/2” L Hump
  • (1) Intake Tube
  • (1) Vent; Strt 1/2” Hose, 1/4”NPT
  • (1) Hose; 1/2”ID X 9”L
  • (1) Gasket; 3/16 Poron
  • (1) Adaptor; #420, Nylon 6/6 GF
  • (10) Washer; 1/4”ID X 5/8”OD - SAE
  • (2) Screw; M4- .7 X 12, Bttnhd SS
  • (4) Bolt; M6 X 1.00 X 16MM , Bttnhd
  • (1) MAF Extension Harness
  • (1) Hose Clamp #56
  • (1) Hose; 3-1/2” TO 3”IDx3”L TPRD
  • (4) Washer; 1/4” Lock, ZN
  • (3) Bolt; 6MM-1.00 X 16MM, SS
  • (2) Washer; 6MM flat, SS
  • (1) Bolt, M6-1 X 30MM
  • (1) Spacer: .625”ODx.250”IDx.250”L
  • (1) Bracket; “L”, STL, TK/PC
  • (3) Nut; 6MM Nylock, Hexhead, SS
  • (1) Bracket; L-Bend, FIN
  • (1) Bolt; M6 X 1.00” X 20MM Hex, SS
  • (1) Heat Shield
  • (1) 48" Edge Trim
  • (1) Adapter; Coupler
  • (1) Hose Clamp #104
  • (1) Air Filter
Installation Info
Tech Specs
Cold Air Intake Specifications
Year/Model: 2010 V6 Filter Placement: Engine Bay
Material: High density polyethylene plastic Finish: Black Finish
Manufacturer: K&N Computer Tune Required: No
Will it fit my Mustang?
  • V6 - 10

Customer Photos

You Might Also Like

Q & A

No questions about this product yet.

Ask the First Question

More Products You Might Like

Customer Reviews (1) Write a Review

Overall Rating 4.0

out of 5 stars

Installation Time:Afternoon

  • Performance Gain 3 3
  • Fit 5 5



  • 4/5

    Installation Time: Afternoon

    May 25, 2016

    GREAT!

    Definitely worth buying! The performance gain was great, I gained about 10 RWHP from this easy install, also looks great with the black on red. This is a great buy, and I'm glad I made the decision to buy it!

    TJ

    Year: 2011 Submodel: V6

    Helpful (1)

Related Mustang Categories