Simple installation for anyone.
- How to Install AmericanMuscle Wheels on Your Mustang
- Customer Submitted:
- How to Install Wheels on Your 1979-2013 Mustang
$479.99 (each)FREE Shipping
Popular Tire Setups for this Wheel
Hey Justin here with AmericanMuscle.com, and I’m checking out Forgestar’s F15 monoblock wheels, available in your choice of either matte black, gun metal, piano black, and silver, fitting all 2005 and newer Mustangs. At first glance you can see the design of the F14 Is more of a multispoke mesh wheel design, which has become extremely popular with the Mustang crowd as of late, which is course due to cars such as the RTR and the 2013 GT 500, both of which sport a variation of the mesh wheel design. These monoblock or one piece aluminum wheels go through an advanced process during production called rotary forging, this greatly improves the strength of the wheel, specifically the barrel, and generally reduces the weight of the wheel itself. The F14’s are offered in a wide variety of sizing options including an 18, 19, and 20 inch diameter, and in 9, 10, and 11 inch widths. Because there are a few different width options available, you can easily achieve that classic staggered look, by sticking a wider rear wheel and tire in the back versus the front, which in my opinion is the only way to roll. Chances are if you’re buying new wheels, you’re going to need new tires, we offer a pre built combinations, where we pair your F14’s up with some of the top tires on the market today, in sizes that are guaranteed to fit your car without rubbing, even if you’re lowered an inch or two. Of course you can also take advantage of our free mounting and balancing, free shipping and handling. Finally, all Forgestar wheels are backed by a lifetime structural warranty. When it does come time to install your new wheels just grab a floor jack and some basic hand tools. You’ll want to crack the lugs loose first on the stock wheels before getting the car in the air, after you do that, jack the car up and swap the 4 wheels and tires. Doesn’t get a lot easier than this, but since there is a little work involved, we’ll call it an hour from start to finish. So if you’re looking to take a break from the standard 5 spoke wheel and you want to go with a more modern multispoke mesh wheel design, then be sure to check out these quality lightweight aluminum wheels from Forgestar available right here at AmericanMuscle.com
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
Recommended Tire Size:
Note: Priced per wheel.
Note: Requires either tuner lug nuts or 6-spline style lug nuts
Note: The stock lug nuts (13/16”) prove to be too large when used in conjunction with these wheels. Please take a look at the Lug Nut Ordering Options above for some compatible options.
Fitment: 2005 2006 2007 2008 2009
Mounting & Balancing: AmericanMuscle offers professional mounting and balancing on all wheels and tires when purchased together on the same order. This will allow you to swap out your old wheels for your new set when they arrive.
What is TPMS? The Tire Pressure Monitoring System (TPMS for short) is a factory installed safety feature on all 2007 and newer Ford Mustangs that alerts you when your tire pressure drops to an unsafe limit.
How do I keep my TPMS feature? Aftermarket wheels do not come with TPMS sensors. However, if you select 'Add TPMS Sensor Kit' and your specific year range from the options listed above, we'll install the TPMS Sensors in your new wheels!
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
March 14, 2019
Definitely worth the money!
I had bought the rear 20x11 from a friend and had to buy these new but they were worth it! I went with the Nitto NT555 G2 for tires.Helpful (0)
April 13, 2014
Great Wheels for the price
I ordered these for my 2011 GT500. These were packaged as expected, well protected and were shipped timely. I was disappointed to see that the stems and caps were not black- just know that if you order the tire pressure sensors that the stem and caps are metal colored, and don't look good on a flat black wheel. Additionally, after mounting I had a vibration, and had to take them to a local tire shop and check the balance. The right rear was way off. Otherwise I love the way these wheels look and I do recommend them!Helpful (13)
August 26, 2013
Good quality but bad finish
These wheels look amazing and they only weigh 24.5 lbs for a 20" wheel. The tires seem fine to me, I'll have to see how the handle in my mild winter driving since they are summer tires and it is my DD I do feel every bump since I am lowered but it does grip the road better and I technically cut some weight scone these wheels weight 3lbs less than my 18" stock wheels. The only huge negative is the price and that apparently they changed their powder coating process recenttly after talking with others and my lug area is not coated completely. It's real noticeable when I point it out. FYI Response from forgestar and I got the same over the phone and AM confirmed by checking their inventory as well. The 20x9 for a Mustang roughly weighs 24.5lbs. The lug holes are always powdercoated but depending on the depth of the lug holes they may not be able to power the entire lug hole. Otherwise they may have gotten a 5 star. I may plastidip the lug area at some point to address the lug area issue.Helpful (13)
June 28, 2012
Forgestar F14 20's
I'd been going back and forth on the Forgestar F14's vs. another brand. Finally decided on the F14's and noticed American Muscle could now do them in 20". They shipped immediately and were to me in 3 days. Packaged perfectly with lots of padding and protection. Fit and finish is beautiful. My local tire people mounted up some Nitto Invo 275/35/20 and 315/35/20 as American Muscle could not provide these sizes for me. Balanced out great and ride really nice. Car now looks hunkered down like it should. Would definitely recommend. Thanks, jeffHelpful (12)
What offset is this 20x9 wheel? Looking for a 35mm 20x9 wheel for my Shelby GT500.Thanks!
This wheel has an offset of 35mm.
Is the 20x9 wheel deep concave?
This wheel is a Semi Concave wheel.
on Forgestars website they have 20x10.5 . is 20x9 the highest you guys carry for front wheels? I was thinking of going 20x10.5 up front and 20x11 in back.
We do not recommend going larger than a 20x9.5 in the front, though, we do carry this wheel in a 20x9.5, which is item number 384162G05, and you can find it here: https://www.americanmuscle.com/matte-forgestarf14-20x95-0514.html
Can you please confirm that these wheels will fit my Mustang with the upgraded factory Brembo brake package. Thanks!
The Forgestar F14 Monoblock Matte Black Wheel will fit a 2005-2014 Mustang with factory Brembo Brake Package
Will these wheels work with eibach pro system plus suspension system? Will tires rub with the car lowered by suspension kit. Will there be any gap between the fender well and tire with this setup
Yes they will !
There is a drop down menu right below the price that gives you the option to select your year range for your TPMS.
Simple installation for anyone.
What's in the Box
|Placement:||Front or Rear|
|Offset:||1.37 Inches, 35mm|
|Backspacing:||6.40 Inches, 163mm|