Free Shipping On Orders Over $49. Details

Talk to a Mustang Expert
1-888-332-7930
Mon - Sun, 8:30 AM EST - 11:00 PM EST
Win A 700+ HP 2018 RTR Mustang Enter Now!

SR Performance Stainless Steel Exhaust Hanger Kit (05-10 All)

Market Price $54.99 You Save 9% ($5.00)
Our Price

$49.99 (pair)

FREE Shipping
  • Item 20021
  • MPN# 20021

Local Install Shops

Quoted installation from $125

View 3 Shops

near 19355 (change)

Sorry, please enter a valid US or CA postal code
We're sorry, zip can't be updated at this time.
In Stock Ships same business day.
Ship to: ASHBURN - 20146
Sorry, please enter a valid US or CA postal code
We're sorry, zip can't be updated at this time.
Choose options to add to cart
    Create a list
    Add to New List

    Saved - View your saved items

    We're sorry. We couldn't save this product at this time.

    Features, Video & Details

    • 304 Stainless Steel Construction
    • Perfect for Aftermarket Exhaust Systems
    • Recommended for True Dual GT Cat-Back on V6's
    • Improves Undercarriage Appearance
    • Sold as a Set of Two
    • Fits 2005-2010 Mustangs

    Review & Installation Video

    Review & Install Video

    If you’re looking to replace the worn out and rusty exhaust hangers on your ride, or you’re just looking to add a true dual exhaust system to your V6, you’ll definitely want to check out these stainless steel exhaust hangers for all 2005-2010 V6 and V8 Mustangs. These high quality OEM like replacements are going to be for someone who’s experiencing some exhaust rattles, or vibrations caused by an old and failing hanger. These will also be good for someone who has a 2007 and up Mustang, who is having some troubles getting their aftermarket exhaust bolted up using those factory rubber hangers, which will not work with some of today’s aftermarket exhausts. The hangers themselves are sold in sets of 2 and constructed from durable 304-grade stainless steel, which won’t rust up like your factory hangers. Speaking of those rusty factory hangers, getting those removed, and these new stainless hangers installed, should only take you about an hour or so but just be sure to have your favorite can of penetrating oil on hand before you get started. So if you’re looking to get rid of excessive exhaust vibrations and rattles, or you’re just looking to add that true dual system to your V6, then you’ll want to check out quality stainless hangers today at AmericanMuscle.com.

    Durable, rugged construction. Replace your Mustang's rusty factory muffler exhaust hangers with durable Stainless Steel. These SR Performance Mustang exhaust hangers feature OEM style construction, but ditch the rust-prone factory steel for gleaming 304 Stainless Steel.

    Versatile. These SR Performance hangers work with any aftermarket or stock cat-back exhaust system and will be the last hangers your Mustang will ever need. The kit fits all 2005-2010 V6 and V8 Mustangs, and is also the recommended hardware for installing a True Dual GT Cat-Back on V6 Mustangs.

    Application. This SR Performance Stainless Steel Exhaust Hanger Kit is designed for use on the 2005 to 2010 V6 and V8 Ford Mustangs. Recommended for 2005-2010 V6 Mustangs converting to a True Dual Cat-back exhaust.

    Technical Notes. Sometime in 2007, Ford changed the style of exhaust hangers used to install the stock exhaust on the 2007 S197 Mustangs. They switched from a "rubber and steel" hanger design to an "all rubber" hanger, which will not work correctly with the after-market cat-back exhaust systems on the market today. Please visually check your exhaust to determine whether or not you need this optional rubber and steel hangar.

    Fitment: 2005 2006 2007 2008 2009 2010 Details

    What's in the Box
    • (2) Hangers
    • (8) Eight Washers
    • (8) Eight Nuts
    Installation Info
    Tech Specs
    Will it fit my Mustang?
    • Bullitt - 08, 09
    • GT - 05, 06, 07, 08, 09, 10
    • GT500 - 07, 08, 09, 10
    • V6 - 05, 06, 07, 08, 09, 10

    People Who Bought This Item Also Bought

    Customer Photos (8) Submit Your Photo

    View All 8 Photos

    You Might Also Like

    7 Questions / 7 Answers

    Ask a Question

    Can I order three if possible? A fourth hanger would be unnecessary. Thank you.

    JasonW

    • Hey Jason, Unfortunately we do not sell them individually, so for three you would have to purchase to sets

      Cobra_Machine04

    Helpful (0)

    I am looking to do a true dual exhaust conversion on my v6 and was wondering will I be able to use and axle back exhaust for a v8 and use these to help the fitment?

    TravisT

    • We recommend going with an axle-back that is designed for your V6 Mustang. An exhaust system for a GT may not bolt up correctly.

      AshleyK

    Helpful (0)

    Could these fit on a 2014 at all? I don't need them in the stock location, I m just wondering if there is a position they can bolt onto in the rear for the 2014s.

    KKIWolf

    • Thank you for your question about the SR Performance Stainless Steel Exhaust Hanger Kit (05-10 All). Unfortunately, we cannot confirm the fitment of these exhaust hangers on a 2014. These were developed as a replacement option for worn out hangers on the GT or as a way for the single exit V6 Mustang to run a true duel exhaust system. While there may be a way to get these to work with modification for a 2014, we cannot confirm fitment for that and would recommend seeing an exhaust specialist or shop regarding any issues you may have with your exhaust.

      AMRich

    Helpful (0)

    My V6 has a single exhaust, do i need one set of these or two?

    Arrow

    • If your Mustang has a single exhaust, you would only need one of the SR Performance Stainless Steel Exhaust Hanger Kit (05-10 All).

      KevinD92

    Helpful (0)

    General 06 Mustang GT My exhaust hanger broke and I was wondering if these are made to fit on the rear hangers near the muffler tip. Can you please let me know ASAP? Thanks, Leo

    Nando62

    • Yes. My factory hanger also broke and I replaced them with the Pypes version of these hangers, although they look exactly the same. Worked fine.

      SwitchbladeHD

    Show 1 more answer Helpful (0)

    will it fit the 2014?

    Nick828

    • no that's not the right ones Good luck

      Jamesg169

    Helpful (0)

    More Products You Might Like

    Customer Reviews (100+) Write a Review

    Overall Rating 3.9

    out of 5 stars




    • 5/5

      February 19, 2018

      YOU NEED THESE

      For everyone with a v6 stang, you need to buy 2 (sets) of these. it will not work with one. you need 2 for each muffler.

      Joshua

      Year: 2005 Submodel: V6

      Helpful (0)

    • 1/5

      February 12, 2018

      Not very durable

      Bought a set of these mounts to replace the factory ones. Come to find out the rubber broke out in a short period of time and the exhaust fell off going down the road. These are not as strong as the factory ones. I had the American Thunder Flowmasters on the car which I think are too heavy for the mounts. Swapped to the MBRP mufflers that are half the weight and new factory mounts. If your factory mounts are ok, just reuse them or buy OEM ones.

      RyanH

      Year: 2007 Submodel: GT

      Helpful (0)

    • 5/5

      January 13, 2018

      LIFE SAVERS!

      I don't know about everyone else on this site, however I know when I get a new car part I want it on immediately! I had my car in the shop getting the Roush Extreme axle-back installed, I later got a call from the shop saying the stock hangers had "some issues" I had already purchased these with the exhaust and gracefully said," I have some new ones sitting in the back floor board". After looking at them they thanked me and said we will be getting right on it. Because of these hangers I got my car back the same day and the fitment couldn't have been tighter the axle-back was as firm as ever no bouncing or rubbing! Highly recommend!

      Built2010Gt

      Year: 2010 Submodel: GT

      Helpful (0)

    • 4/5

      January 03, 2018

      Exhaust hangers

      Did not need these for my 2006 but put them on anyway. Good fit and finish and slipped right on.

      TimothyS

      Year: 2006 Submodel: V6

      Helpful (0)

    • 3/5

      December 26, 2017

      Hangers

      I had to re-purchase these hangers because one of the rubber pieces fell out after only 1 summer of use. The warranty is only 30 days. So far the new ones have held up, although the car is now in storage for the winter.

      BrianF

      Year: 2005 Submodel: GT

      Helpful (0)

    • 1/5

      December 25, 2017

      Pypes cat back system with these hangers

      This cat back system even through it had the rods in x pipe for these hangers this 2010 Ford Mustang didn't have the cross member that used these extra hangers. It was a waste of money to purchase them.

      CecilG

      Year: 2010 Submodel: V6

      Helpful (0)

    • 4/5

      December 14, 2017

      Exhaust Hangar

      It was well made and quality part. Unfortunately I had difficulty with the exhaust system purchased and couldn't use this on that system.

      Crack50

      Year: 2007 Submodel: V6

      Helpful (0)

    • 1/5

      November 24, 2017

      Don’t buy them..

      These lasted about 6 months. Exhaust is looser now then it was before I bought them. Stick to OEM on these.

      ChrisL

      Year: 2008 Submodel: GT

      Helpful (0)

    • 1/5

      November 13, 2017

      Product is cheap

      These are a poorly made product. I had bought these even though my factory hangers were fine because I thought these would be better. I went through 4 of them before I finally returned them for good. The rubber lining rips under a little bit of weight, causing your exhaust to hang lower than they should. Save you money and stick with the factory hangers/

      NathanaelE

      Year: 2007 Submodel: V6

      Helpful (0)

    • 1/5

      November 10, 2017

      Rubber broke within two weeks.

      Installed the mounts on the left side exhaust muffler and within 2 weeks the muffler hanger broke thru both mounts. I would not by these again. I made them work by injecting industrial sealant into the mounts.

      Curtis

      Year: 2005 Submodel: V6

      Helpful (0)

    • 1/5

      November 07, 2017

      GARBAGE PRODUCT

      Exhaust has fallen off 3 times with these hangers, junk, junk. Floppy rubber no support, rubber is way to soft. Needs to poly and filled

      JasonR

      Year: 2013 Submodel: Boss

      Helpful (0)

    • 1/5

      October 20, 2017

      SR performance exhaust hangers

      Bought these hangers to go with the SLP axle back for my 05 gt. Upon installing them and adjusting everything, the prongs broke through the rubber and would have cause a lot of noise(not good, more annoying NVH type noises) in the future. Contacted customer service about the issue and got everything worked out.

      Shadow

      Year: 2005 Submodel: GT

      Helpful (0)

    • 5/5

      October 19, 2017

      Fit like a glove

      These bolted right up no hassle. Keep in mind the mustang does use 4 of these 2 for each muffler.

      JohnD

      Year: 2007 Submodel: GT

      Helpful (0)

    • 3/5

      October 12, 2017

      Exceptional

      I purchased these after getting a dual exhaust conversion done on my V6. They did the job and held everything up nicely. What I love about them is the fact that the stainless steel is great material since I live in Northern Alberta Canada, so rust won’t be an issue with these. I gave it 3 stars because only after driving for about a month with these, and it was mainly city driving for the most part, my passenger side exhaust hanger’s rubber part where you insert the exhaust, tore. Leaving my exhaust hanging and touching against metal giving my car an annoying rattling every time I’m cruising at around 30-80 km/h so now its just rigged with lock wire to hold it up enough that it won’t rattle against metal. All in all, 3 stars.

      Vinny

      Year: 2008 Submodel: V6

      Helpful (0)

    • 5/5

      October 10, 2017

      Well made and work great.

      Bought these to replace the stock hanger kit when installing Flowmaster Axle-Back System - Dual Rear Exit - Force II. Work great and seem to hold the exhaust better than stock.

      Arch

      Year: 2005 Submodel: GT

      Helpful (0)

    • 5/5

      October 02, 2017

      Perfect in my opinion

      My mustang had a horrible squeak. Replaced the hanger and the squeak disappeared. Easy installation

      ChristopherH

      Year: 2007 Submodel: V6

      Helpful (0)

    • 5/5

      September 30, 2017

      MY TOY MUSTANG

      I OPENED THE BOX I WAS SURPRISED MY PART WAS JUST WATT I ORDERED IT WAS SHINY NEW I CANT WAIT 2 INSTALL MY PART ON MY TOY MUSTANG THANKS

      HOMER

      Year: 2006 Submodel: V6

      Helpful (0)

    • 5/5

      September 29, 2017

      Works perfectly.

      The picture makes these look flimsy but the are very heavy duty and look like the will hold up as well if not better than stock.

      AndrewS

      Year: 2006 Submodel: V6

      Helpful (0)

    • 1/5

      September 20, 2017

      Didn't work:/

      I bought this hanger kit to replace my stock hangers. Install was simple and easy. But after the first day the rubber that holds the exhaust broke and started to shake and rattle.

      TyR

      Year: 2005 Submodel: V6

      Helpful (0)

    • 1/5

      September 19, 2017

      Exhaust Hanger

      They're the worst product honestly, cheaply made and breaks very easy, dont recommend to anyone.

      Ethan

      Year: 2010 Submodel: V6

      Helpful (0)

    Related Mustang Categories