Spec Flywheel Replacement Friction Plate; 8 Bolt (99-Mid 01 GT; 96-04 Cobra; 03-04 Mach 1)

Restore Your Flywheel. If you're replacing your Mustang's clutch or just need to have your SPEC flywheel resurfaced as maintainence, consider a SPEC replacement flywheel friction plate. A SPEC replacement friction plate is designed to fit your existing SPEC flywheel perfectly, providing a brand new surface for your new clutch.

Better Than Resurfacing. Replacing your flywheel's friction plate is significantly better than resurfacing it, because during resurfacing the plate is simply "flattened" by removing enough material to create a clean, flat surface. There are a few problems with this - one, you're losing some of your friction plate to this process. Second, any damage that was done to the plate due to heat or stress isn't fixed. Replacing the plate is better than resurfacing to give you a completely fresh start.

Application. This SPEC flywheel replacement friction plate is designed for the 8 bolt SPEC flywheels for the 1999 to Mid 2001 GT, 1996-2004 Cobra and 2003-2004 Mach 1, which are SPEC part numbers #SF84A & SF84S.

Fitment: 1996 1997 1998 1999 2000 2001 2003 2004 Details

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov