Win $5,000 For Your Mustang! Enter Now!
Talk to a Mustang Expert
1-888-332-7930
Mon - Sun, 8:30 AM EST - 11:00 PM EST

Free Shipping On Orders Over $49. Details

Borla Stinger S-Type 3 in. Cat-Back Exhaust - Black Tip (15-17 GT Fastback)

Market Price $1,412.99 You Save 11% ($151.00)
Our Price

$1,261.99

FREE Shipping
  • Item 393802
  • MPN# 140629BC

Out of Stock Notify Me Choose options to add to cart

Features, Video & Details

  • Loud Throaty Exhaust Note without the Drone
  • X-Pipe and "S-Type" Stinger Mufflers Included
  • 3" Mandrel-Bent Stainless Steel Tubing
  • 4" Black Chromed Stainless Steel Tips w/ Embossed Borla Logo
  • Direct Bolt-On Design
  • Works with Both Factory Manifolds and Aftermarket Long Tube Headers
  • Fits 2015-2017 Mustang GT Fastbacks

Review & Installation Video

Review & Install Video

Increases Power and Performance. Increase the power and performance of your 2015-2017 GT Mustang by upgrading to a Borla S-Type Cat-Back Exhaust. Borla's S-Type Cat-Back, also know as Stinger, will greatly improve your S550 Mustangs exhaust flow when compared to the restrictive factory exhaust. This is accomplished by replacing the massive mid pipe resonator and narrow 2.5" factory piping with a high flow X-pipe, larger 3" mandrel-bent tubing and a set of Borla's straight-through Stinger mufflers for smooth, unrestricted exhaust flow. After installing a Stinger Cat-Back you will see a noticeable increase in horsepower, torque and engine response.

Aggressive Throaty Sound. Borla's Cat-Back Exhaust not only increases the power output of your Mustang, but it also increases its sound output as well. This Cat-Back features a pair of high flow straight-through S-Type "Stinger" mufflers for an aggressive tone. The included X-Pipe balances out the exiting exhaust gases to reduce drone, while adding a crisp raspy race car growl. This Stinger setup will add a loud aggressive throaty sound to your 5.0's exhaust with an exciting growl that will let everyone know what's mounted between your GT's fenders.

High Quality Construction. Borla manufactures their exhaust systems from high quality 304 stainless steel tubing for superior strength and enduring corrosion resistance. Featuring ultra smooth mandrel bent 3" diameter piping and a set of straight-through "Stinger" mufflers, this Borla Cat-Back will significantly out flow your Mustangs original exhaust system. Included are a pair of 4" 304 stainless steel exhaust tips that are completed in a stealthy black chrome finish. The tips are embossed with the Borla logo for outstanding good looks.

Works with Factory and Aftermarket Headers. Borla engineered their 3" Cat-Back Exhaust to be installed with either with the factory manifolds or larger aftermarket long tube headers by including a set of 2.5" to 3" step-down adapters and intermediate connection pipes. This lets you install the Cat-Back on your bone stock Mustang with the option of adding long tube headers or other performance parts in the future without the need of purchasing a whole new cat-back system.

Direct Bolt-On Installation. Borla designed their Cat-Back to be a direct bolt-on upgrade replacement for your GT Mustang's factory exhaust system. There is no cutting or extra modifications required. Installation of this Borla S-Type Exhaust can be completed in about two hours with just basic hand tools.

Application. This Borla Stinger S-Type 3" Cat-Back with Black Chrome Exhaust Tips is designed to fit all 2015-2017 GT Fastback Mustangs equipped with the coyote 5.0L V8 engine. Not compatible with convertibles.

Technical Note. The included mufflers are 49 state drive-by noise legal, not intended for use in the state of California.

Fitment: 2015 2016 2017 Details

What's in the Box
  • (1) Right Muffler Assembly
  • (1) Left Muffler Assembly
  • (1) X-Pipe Assembly
  • (1) Right Intermediate Pipe
  • (1) Left Intermediate Pipe
  • (2) Step Down Adapters
Installation Info
Tech Specs
Cat-Back Exhaust Specifications
Piping Material: Stainless Steel Tip Material : Black Chromed Stainless Steel
Piping Size: 3.0" Tip Size: 4.0"
Muffler Type: Straight-through Fitment: 2015-2017 GT
Will it fit my Mustang?
  • GT - 17, 16, 15

Not Compatible with Convertibles

People Who Bought This Item Also Bought

Most Helpful Reviews

5/5
Just plain mean!

I love this exhaust, there is absolutely NO DRONE! It has a beautiful idle when both cold start and at temp and then when hitting WOT like the headline says its just plain mean. A friend from work and ...

Read More
Helpful (1)

5/5
Great Product

Highly recommended product. Materials and appearance was as advertised. You will not be disappointed. Installed it myself in 2-1/2 hours with only using ramps under the rear tires and chocks under the ...

Read More
Helpful (1)

Overall Rating 5 out of 5 stars
Read All 9 Reviews

Customer Photos

You Might Also Like

3 Questions / 3 Answers

Ask a Question

I bought a 2017 GT convertible. Why is the 2.5" compatible, but the 3" is not? I may want to add headers down the road, but I'm not sure if this would be a problem.

RickS

  • The 3" Borla Stinger S-Type 3 in. Cat-Back Exhaust is incompatible due to additional bracing that is under the convertibles, that they were unable to get the larger piping to clear.

    Rob D

Helpful (1)

I just got a new 17 GT and I am really considering this cat-back for it. Does this exhaust have the horrible drone that a lot of cat-backs have? I am curious because I had a 13 gt with the Flowmaster Outlaw and it had that nasty drone around 1900-2100rpm.

PJohnston

  • Hey P, So this Borla set up does not have the drone of some of the other systems we carry. The S-type is designed to give you a deep upgrade in sound without going over board and waking up the neighbors. That system is the Borla ATAK the stinger does not have the same decibel level as the ATAK.

    Cobra_Machine04

Helpful (1)

Are clamps included?

RobertoV

  • The clamps will be included with this cat back exhaust kit.

    KevinD92

Helpful (0)

More Products You Might Like

Customer Reviews (9) Write a Review

Overall Rating 5.0

out of 5 stars

Installation Time:Afternoon

Installation Cost:0-$100

  • Loudness / Volume 4.25 4.3
  • Exhaust Note 5 5
  • Fit & Finish 5 5
  • Bang For Your Buck 4.75 4.8



  • 5/5

    Installation Time: Less than 1 Hour

    June 19, 2017

    Just plain mean!

    I love this exhaust, there is absolutely NO DRONE! It has a beautiful idle when both cold start and at temp and then when hitting WOT like the headline says its just plain mean. A friend from work and I took our time to install the exhaust so the time was around 1.5hrs. Already gearing up for long tubes down the road. The cost is up there but is absolutely worth it if you have it in your budget.

    PJohnston

    Year: 2017 Submodel: GT

    Helpful (1)

  • 5/5

    May 27, 2017

    Great Product

    Highly recommended product. Materials and appearance was as advertised. You will not be disappointed. Installed it myself in 2-1/2 hours with only using ramps under the rear tires and chocks under the front tires. Heads up for the DIY guy, the removal of the stock cat-back is a little heavy and awkward to remove yourself. I told my friends don't worry about helping me, but that was the only time a little assist would have been great.

    FrankT

    Year: 2017 Submodel: GT

    Helpful (1)

  • 5/5

    Installation Time: Less than 1 Hour

    October 04, 2016

    Perfection!

    Perfecrion is all that is needed to say about this exhaust. Quality product! Very straight forward install and everything fit together great! The sound....the sound is amazing! Loud when you want it yet tame while cruising. The tone is perfect. Its a deep rumble with a hint of rasp under load when getting on it. Thanks again American muscle for the quick shipping and borla for the quality product!

    Mike

    Year: 2016 Submodel: GT

    Helpful (1)

  • 5/5

    August 22, 2016

    Exhaust note is unreal!!!

    Great catback system from Borla. The 3" gives a little more tone compared to the 2.5" system. Great stainless construction and that sound that every mustang owner is looking for. The black tips really set off the back end of the car, especially if you have the rest of your car blacked out too.

    RubyRedGT

    Year: 2016 Submodel: GT

    Helpful (1)

  • 5/5

    Installation Time: Shop Install

    Installation Cost: 0-$100

    September 07, 2017

    Sounds amazing

    The sound clip doesn't do this exhaust justice. It sounds perfect! It's louder than I expected but not too loud. My car is brand new. Haven't even put a tag on it yet. Had to do the Borla exhaust first! Well worth the money!

    BrandonF

    Year: 2017 Submodel: GT

    Helpful (0)

  • 5/5

    Installation Time: Less than 1 Hour

    August 15, 2017

    Borla

    Took an hour. Easy install and fit great. Sounds even better

    DavidW

    Year: 2015 Submodel: GT

    Helpful (0)

  • 5/5

    Installation Time: Afternoon

    August 11, 2017

    Perfect

    This exhaust sounds amazing! good material, easy installation with a nice deep growl. Cant wait for long tubes now!

    MattS

    Year: 2016 Submodel: GT

    Helpful (0)

  • 5/5

    Installation Time: Less than 1 Hour

    June 26, 2017

    Nothing like factory exhaust

    I was a little worry that it was going to sound like the factory exhaust but, what a difference. I had a big smile for the first 5 minutes. Once again AM came through with excellent service and Thx to Borla for outstanding packaging.

    Moe

    Year: 2017 Submodel: GT

    Helpful (0)

  • 5/5

    June 19, 2017

    Great quality and sound

    My neighbors love me .... said nobody ever thought.

    Jonathan

    Year: 2017 Submodel: GT

    Helpful (0)

Related Mustang Categories