Video Review & Installation

Hey I’m Justin with AmericanMuscle.com, and I’m taking a closer look at these front and rear caliper covers from MGP fitting all 99-04 V6 and GT Mustangs. Here’s the deal, aftermarket big brake kits are not cheap and fitting your factory calipers can sometimes turn into a disaster if done incorrectly. These covers from MGP are a great way to cover up those factory calipers, while adding a little bit of customization and keeping brake dust off your wheels. The caliper covers are available in your choice of either black or red, and with a number of different logo options. For instance I have here the black GT, the classic running Pony logo in red, the complete Cobra setup in black, and I also have with me the red GT and many more. Taking a closer look at the calipers themselves you’ll notice a high quality T6 aluminum construction, along with that black or red powder coated finish. Finally, the officially licensed logo is engraved right in the center along with some simulated hardware, just for a more realistic look. The install really isn’t all that bad and should take you about an hour from start to finish. You will need to remove your wheels so make sure you have your jack, and you’ll also want to make sure you have a 3/8” wrench handy, just to tighten up the hardware on the covers themselves. Other than that, everything is very straightforward. So if you’re tired of looking at those rusty factory calipers on your ride, and you don’t feel like forking out money for an aftermarket big brake kit, then be sure to check out one of these officially licensed caliper covers from MGP right here at AmericanMuscle.com